Siligence SGA441SW Login: Default Password

Log in to the Swisscom Internet-Box plus at 192.168.1.1 with admin and the password made at first setup, and fix the login faults owners hit most often.

I have helped Swisscom customers log in to the Internet-Box plus, and the same thing trips owners up every time. They search for a default password, but this box was never shipped with one. Swisscom asks you to create your own password the first time you open the settings. Your box is online, and the password you need is the one you created.

This guide gives you the SGA441SW login, the model table, and the steps that get you in, including the forgotten-password flow Swisscom itself provides.

The Siligence SGA441SW, sold by Swisscom as the Internet-Box plus, logs in at 192.168.1.1 or internetbox.swisscom.ch. There is no shared factory password: you create one at first setup, and the username is admin. If you forgot it, use the Forgotten password flow on the login page.

The fastest way in: tap the button below, then sign in with the details in the box.

🔐 Siligence SGA441SW Router Admin Login

IP Address: 192.168.1.1

Username: admin

Password: created during first setup

Login to Admin Panel →

This button opens our 192.168.1.1 login guide, which takes you to the box itself. It works only when your device is connected to that box, by WiFi or cable. There is no factory password to type: use the password you created at first setup.

How to Log in to the Siligence SGA441SW

Keep your My Swisscom details close before you start, because the first setup runs through the app.

  1. Connect your computer to the Internet-Box plus with an Ethernet cable or over its Wi-Fi network.
  2. Open a browser and go to 192.168.1.1, or to internetbox.swisscom.ch.
  3. On a first login, click Set new password and choose a password, then confirm it.
  4. On later logins, type admin in the username field and your created password in the password field, then click Log In.
  5. The admin panel opens, and you can change the Wi-Fi details or check connected devices.
Siligence SGA441SW login laptop smartphone workspace wifirouterzone.com
The Internet-Box plus is managed from a laptop or phone, not from a printed password.

Siligence SGA441SW Default Username and Password

I have seen this catch owners out: password lists give this model a password, but none of them is real. The table below shows what the SGA441SW really uses, so you stop hunting for a password that was never printed.

ModelUsernamePasswordLogin IP
SGA441SW (Swisscom Internet-Box plus)admincreated during first setup192.168.1.1
Internet-Box plus (web portal)admincreated during first setupinternetbox.swisscom.ch
Internet-Box plus (My Swisscom app)Swisscom loginSwisscom loginapp only

The username admin comes from the Home Assistant integration documents for the Swisscom Internet-Box, not from a Swisscom page. Swisscom own pages never state a username, and they never print a factory password. The password is the one you created at first setup, and it also lives in My Swisscom.

Do not use admin and 1234 for this model. That pair belongs to a different Siligence model, the SG-NP-00, and it was never the SGA441SW password. Password lists that copy it across models are wrong, and I do not repeat them here.

Change Siligence SGA441SW WiFi Password and Network Name

I change the Wi-Fi password in the box settings or in My Swisscom, because the Wi-Fi name and password live in your Swisscom account. The change takes about a minute once you are logged in.

  1. Log in at 192.168.1.1 with your admin password, or open the My Swisscom app.
  2. Open the wireless settings in the admin panel, or the WLAN section in My Swisscom.
  3. Type your new network name (SSID) in the network name box and save it.
  4. Set the security to WPA2, then type a new Wi-Fi password.
  5. Save the settings, then reconnect your devices with the new password.

The Wi-Fi password and the admin password are different things on this box. Changing one does not change the other. I write both down before I save anything, so I am not locked out of my own network.

If you set the box up with the My Swisscom app, the app guided the first setup with a QR code on the unit. The same app holds your WLAN name and password, so it is the fastest place to check them before you log in to the web portal.

Siligence SGA441SW Login Not Working?

  • Make sure your device is connected to the Internet-Box plus network, not to mobile data or a different Wi-Fi network.
  • Check that the DSL or fibre cable is plugged into the right port, and that you are on a LAN port or the box Wi-Fi.
  • Try the right address. The box answers at 192.168.1.1 and at internetbox.swisscom.ch.
  • If you forgot the password, click Forgotten password on the login page and follow the flow. There is no factory password to fall back to.
  • Check that Caps Lock is off, and type the password exactly as it is. Passwords are case-sensitive.
  • Restart the box: unplug it, wait 30 seconds, and plug it back in.

If you still cannot log in because the password was changed and forgotten, reset the router box to factory settings: press the small black reset button on the back of the box and hold it for about 10 seconds, until the lights change, then set it up again through the My Swisscom app. A reset returns the box to an unconfigured state.

A reset erases every setting, including your Wi-Fi name and password, so keep your My Swisscom login handy before you reset. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.

Siligence SGA441SW Key Specs

I check the specifications before I troubleshoot a box, because they tell me what the hardware can actually do. The SGA441SW is Swisscom Internet-Box plus, and its numbers come from the hardware record for this model.

FeatureSGA441SW
Sold asSwisscom Internet-Box plus
TypeWireless router + DSL modem + fibre CPE
Wi-Fi802.11a/b/g/n/ac
CPUMarvell 88F6281
Memory128 MiB flash, 512 MiB RAM
Ports1G LAN / WAN

The hardware figures above come from the community hardware database for this model, not from a Swisscom spec sheet, and no SGA441SW manual was found anywhere. The Internet-Box plus mapping rests on Swisscom community posts and the Home Assistant supported-devices list, not on a Swisscom document naming the SGA441SW.

The SGA441SW has no factory password, and that is the whole story. Open 192.168.1.1, sign in with admin and the password you created at first setup, and the admin page opens. Keep that password safe in My Swisscom, and the login never becomes a puzzle.

Siligence SGA441SW problems users report, and what fixed them

Random reboots with “suspected power cycle”

An Orange Belgium customer had a replacement Siligence modem keep shutting down at random. A technician saw it reboot during a WiFi speed test, confirmed it faulty, and swapped it for a Livebox.

WiFi speed falls far below normal

The same customer saw WiFi drop to WiFi 4 levels between resets. After the swap, WiFi 5 speeds passed 450 Mbps, about double. See the Orange Belgium community thread.

Will bridge mode stop the overheating

He asked whether bridge mode with WiFi off would cut heat and stop the shutdowns. If your unit reboots on its own, ask Orange for a replacement instead of working around it.

FAQs About Siligence SGA441SW Login

There is no shared default. The SGA441SW, sold as the Swisscom Internet-Box plus, logs in at 192.168.1.1 with the username admin and a password you create at first setup. I never try a password from a list, because none was ever printed for this model.

The SGA441SW answers at 192.168.1.1, and also at internetbox.swisscom.ch. That is the address Swisscom own setup guides give for the Internet-Box, and it is the address the Home Assistant integration uses by default.

There is none. Swisscom flow asks you to set a new password the first time you open the settings, and that password is what the login page accepts afterwards. If you forgot it, use the Forgotten password flow on the login page.

Log in at 192.168.1.1, open the wireless settings, type a new network name and password, and save. You can also change it in the My Swisscom app, which holds your WLAN name and password. I write the new password down before I save it.

Press the small black reset button on the back of the box and hold it for about 10 seconds, until the lights change. A reset returns the box to an unconfigured state, so set it up again through the My Swisscom app with your Swisscom login.

Yes. Swisscom community posts and the Home Assistant supported-devices list identify the SGA441SW as the Internet-Box plus. The box is made by Siligence SAS and sold by Swisscom in Switzerland.

The team behind this guide
Omar Haddad

Omar Haddad found this topic
Keyword Analyst
Focus: Search Data & Demand

Laura Gomez

Laura Gomez wrote this guide
Content Writer · Published November 21, 2026
Focus: Smart Home & IoT

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts