WiFiBlast Router Login: Default IP & Password
Log in to a WiFiBlast repeater at 192.168.10.1 with admin and admin, join its open WiFi Repeater network first, and fix the faults that keep owners out.
I have set up WiFiBlast repeaters for friends whose Wi-Fi dies at the far end of the house, and the first surprise is always the same. WiFiBlast is not a router at all. It is a plug-in Wi-Fi repeater, and its login page only appears after you join the extender own wireless network. Your home Wi-Fi is fine, and the repeater is one login away.
This guide gives you the WiFiBlast login, the setup steps, and the fixes that get the repeater working.
WiFiBlast repeaters log in at 192.168.10.1 with the username admin and the password admin. You can also open the setup page at ap.setup or myrepeater.net, and you must join the open Wi-Fi network called WiFi Repeater before the login page will load.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.10.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.10.1 login guide, which takes you to the repeater itself. It works only when your device is connected to that repeater, by WiFi or cable. Join the open WiFi Repeater network first, or the page will not load.
How to Log in to a WiFiBlast Router
I walk through this in the same order every time, because the order keeps a setup from going wrong. Keep your home Wi-Fi password close before you start, because the repeater needs it to copy your network.
- Plug the WiFiBlast repeater into a power socket halfway between your router and the dead spot.
- On your phone or computer, join the open Wi-Fi network called WiFi Repeater. It has no password.
- Open a browser and go to 192.168.10.1. You can also try ap.setup or myrepeater.net.
- Type admin in the username field and admin in the password field, then click Log In.
- Choose Repeater Mode, select your home Wi-Fi network from the list, enter your home Wi-Fi password, and click Apply.
The video above is Wavlink official setup tutorial for the same class of dual-band repeater hardware that WiFiBlast is built on. It shows the WPS pairing and the LED placement indicator, which work the same way on a WiFiBlast unit.

WiFiBlast Default Username and Password
I have seen this catch owners out: WiFiBlast is a white-label repeater, so its login follows the Wavlink-style hardware it is built on. The table below lists the verified logins and setup addresses, so find your situation and try its row first.
| Model / Situation | Username | Password | Login IP |
|---|---|---|---|
| WiFiBlast repeater | admin | admin | 192.168.10.1 |
| Setup before joining a network | admin | admin | http://ap.setup |
| Setup from the device label | admin | admin | http://myrepeater.net |
| Default Wi-Fi (before setup) | open network | no password | SSID: WiFi Repeater |
If the login page will not open, you are probably still on your home Wi-Fi instead of the extender network. The 192.168.10.1 address only exists on the repeater own network, so join WiFi Repeater first and try again. The Wavlink manuals behind this hardware list the same values: default IP 192.168.10.1, login name admin, password admin.
There is no official WiFiBlast manual or support site. WiFiBlast is sold as a white-label repeater, and the values above are verified from the Wavlink manuals for the same hardware, the device label, and independent setup guides that all agree. I do not claim an official WiFiBlast manual exists.
Change WiFiBlast WiFi Password and Network Name
I change the Wi-Fi password on the repeater after setup, because the repeater copies your home network and its password is only as strong as the one it copied. The change takes about a minute once you are logged in.
- Log in at 192.168.10.1 with admin and admin.
- Open the wireless settings in the repeater admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
The repeater extends the network you picked during setup, so changing the repeater password alone does not change your home router password. I change the home router password first, then update the repeater to match, so the two networks stay in step.
If your repeater has no wireless menu, you may be logged in to the wrong device. The 192.168.10.1 page belongs to the repeater, and the label on the bottom of the unit carries the model, the default SSID, and the setup address. I read the label before I trust any password list.
WiFiBlast Login Not Working?
I start with the connection itself, because that is where most repeater failures begin.
- Make sure your device is joined to the WiFi Repeater network, not to your home Wi-Fi or mobile data.
- Check that the repeater is plugged in and its lights are on. A wall-plug repeater has no WAN cable, so do not look for one.
- Try the setup address ap.setup or myrepeater.net if 192.168.10.1 will not load.
- Try admin and admin first, then check the label on the unit for a different password.
- Check that Caps Lock is off, and type the password exactly as it is. Passwords are case-sensitive.
- Restart the repeater: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router repeater to factory settings: press the reset button on the unit and hold it for about 10 seconds, until the lights change, then set it up again from the start.
A reset erases the repeater settings, including the home network it was extending, so you will need your home Wi-Fi password to set it up again. If you cannot reach your main router at all, check that you are using the right gateway address with our router IP finder.
WiFiBlast is a repeater, not a router, and that changes the whole login. Join its open Wi-Fi network first, open 192.168.10.1, and sign in with admin and admin. Pick your home network in Repeater Mode, and the dead spot gets its signal back.
WiFiBlast problems users report, and what fixed them
There is no login page for my Wi-Fi Blast router
Many ISPs sell Calix GigaSpire routers as Wi-Fi Blast and set them up through an app. United Fiber tells customers to sign in to its app and scan the QR code on the router. See United Fiber: connect your Wi-Fi Blast router.
The app does not fill in my login
TekSavvy says to contact support if the login is not filled in during Blast router setup. Your ISP holds the account details.
My WiFiBlast extender page will not load
Connect to the extender’s own WiFi network, not your main router’s, before opening its setup address.










