Netgear Router Login: routerlogin.net Admin Guide
Log in to a Netgear router at routerlogin.net or 192.168.1.1. Default username admin, password password, Orbi and extender logins, reset and fixes.
I have been locked out of my Netgear login page, and the cause is often small. People type the wrong address, or they try a password that was never set.
routerlogin.net is the page that opens your Netgear router settings. When it will not open, the fix is often small. This guide walks you through opening it and signing in.
Open routerlogin.net in your browser and sign in with the username and password on your router label.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your Netgear router
In my experience, this is the part that trips most people up.
- Connect your phone or computer to the Netgear WiFi network, or plug in a network cable.
- Open a browser and go to http://routerlogin.net or http://192.168.1.1.
- Enter the admin username and password. The defaults are below and on the router label.
- Change the default admin password from the administration or system menu.
Netgear default IP address, username and password
I have seen this done wrong more than once, so I keep it simple here.
| Model or type | Login address | Username | Password |
|---|---|---|---|
| Nighthawk and older Netgear routers | routerlogin.net / 192.168.1.1 | admin | password |
| Some Netgear models | 192.168.0.1 | admin | password |
| Orbi mesh systems | orbilogin.com | admin | Created during setup |
| Netgear range extenders | mywifiext.net | (email or admin) | Created during setup |
| Netgear cable modems | 192.168.100.1 | admin | password |
Defaults differ by model and firmware. If these do not work, check the label on your router or reset it.
Log in with the Nighthawk (Orbi app for Orbi) app
I check this before I change anything else.
The Nighthawk app sets up and manages most Netgear routers from your phone. Orbi mesh systems use the Orbi app. Both let you change WiFi settings, see connected devices and update firmware, and some features need a Netgear account.
routerlogin.net vs 192.168.1.1
I treat this as a quick check, not a deep setting.
routerlogin.net only works when your device is connected to the Netgear router. It points to the router whatever its IP address is, which helps if the address was changed. If it does not open, try routerlogin.com or the IP address.
Netgear router login not working?
I would rather confirm it now than fix it later.
1. Check your connection
Your device must be connected to the router’s WiFi or plugged in with a cable. Turn off mobile data on phones, because the router page cannot be reached over a cellular connection.
2. Type the address correctly
Type http://192.168.1.1 in the address bar, not the search box. Use only numbers and dots. Do not add www or .com. Our IP Address Checker fixes common typos.
3. Confirm the router IP
Your router may use a different address. Use the Router IP Finder to read the exact Default Gateway from your device.
4. Try another browser or a private window
Clear the browser cache or open a private window. Some browsers force HTTPS, so type http:// at the start.
5. Restart the router
Unplug the router for 30 seconds, plug it back in, wait two minutes and try again.
6. Turn off VPN or proxy apps
A VPN sends your traffic to another network, so your local router cannot be reached until you disconnect it.
How to change your Netgear WiFi name and password
I always start with the router page for this.
- Log in at http://routerlogin.net with the admin username and password.
- Open Wireless, WiFi or WLAN settings. On dual-band routers, edit both the 2.4 GHz and 5 GHz networks.
- Change the SSID to set a new WiFi name.
- Choose WPA2-PSK (AES) or WPA3 security and enter a new password. Our WiFi Password Generator creates a strong one.
- Click Save or Apply, then reconnect your devices with the new password.
How to reset a Netgear router
In my experience, this is the part that trips most people up.
With the router on, press and hold the Reset button on the back with a pin for about 7 seconds until the power light blinks, then release it. The router restarts with the default settings and you can log in at routerlogin.net.
Note: a factory reset erases your WiFi name, password and other settings. Keep any internet provider login details ready before you reset.
