Sagemcom Router Login: IP, Username and Password
Log in to Sagemcom at 192.168.1.1 or 192.168.254.254 with admin and the label password. Defaults by ISP, WiFi and reset.
Connect to your Sagemcom router first by WiFi or cable. Sagemcom routers are usually supplied by an ISP, so the label login matters most.
Sagemcom builds the F@st routers and gateways supplied by many providers, including Frontier, Windstream, Bell, Orange, Claro and others. The admin address depends on the provider, with 192.168.1.1 the most common and 192.168.254.254 used by Frontier and Windstream.
Most recent models print a unique admin password on the label. This guide lists the defaults by model and provider and shows how to log in, change WiFi and reset. Orange’s Livebox is one of them: it logs in with admin and the first eight characters of the WiFi key.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your Sagemcom router
- Connect your phone or computer to the router WiFi, or plug in an Ethernet cable.
- Open a browser and type http://192.168.1.1 in the address bar. Frontier and Windstream units use http://192.168.254.254.
- Enter the username and password from the table below or from the router label.
- After logging in, change the admin password and make sure WiFi security is WPA2 or WPA3.
If the page does not open, check your Default Gateway with our Router IP Finder. ISP builds sometimes use a different address.
Sagemcom default IP, username and password
| Model or provider | Default IP | Username | Password |
|---|---|---|---|
| F@st 2604, 2804, 3284 | 192.168.1.1 | admin | admin |
| F@st 1704 (Windstream) | 192.168.254.254 | admin | admin or label |
| SE567 / FAST 5260 (Frontier) | 192.168.254.254 | admin | On the label |
| F@st 3686 | 192.168.0.1 | admin | admin or label |
| F@st 5250 | 192.168.2.1 | admin | On the label |
| Newer models | 192.168.1.1 | admin | Unique, on the label |
If the table does not match your router, the label on the back is always correct for a router that was never reset by someone else. A few older models use admin with the password left blank.
How to change the WiFi password on a Sagemcom router
- Log in to the Sagemcom admin page.
- Open Wi-Fi or Wireless, then the security settings for each band.
- Choose WPA2-PSK or WPA2/WPA3 and enter a new password.
- Apply and reconnect your devices.
Some ISP versions hide WiFi settings in the provider app instead. Need a strong key? Try our WiFi Password Generator.
Sagemcom login problems and fixes
- 192.168.1.1 will not load: make sure you are on the router WiFi, not mobile data or a VPN, and type http:// in front.
- Wrong password: check the label first. If you or your ISP changed it, the defaults will not work.
- Page loads but login fails: clear the browser cache or try a private window. Some routers lock you out for a few minutes after several attempts.
- Router from your ISP: the provider may manage it. Their app or support line can reset the admin password.
- Still locked out: a factory reset restores the label login, but erases your settings.
How to reset a Sagemcom router
- Keep the router powered on.
- Press and hold the reset button for about 15 to 20 seconds.
- Release and wait several minutes while it restarts.
- Log in with the label credentials and set up WiFi again.
If your provider uses PPPoE, you need the username and password from the ISP after a reset.
Why Sagemcom routers look different from one ISP to the next
Sagemcom doesn’t really sell routers in shops. It builds them for internet providers, and each provider loads its own software and branding. That’s why a Sagemcom box from one ISP can look nothing like the same model from another.
You’ll find Sagemcom gateways with providers in Europe, North America, Africa and Asia, usually under names like F@st or Fast followed by a model number. The login address is often 192.168.1.1, but some ISPs use 192.168.0.1 or their own address.
The password is the part that varies most. Many units print a unique admin password on the label, sometimes called the Web UI password, rather than using a shared default. If the label doesn’t list one, your ISP’s help pages or support line will have it.
What your ISP may have locked
Because the router belongs to your provider, some settings are deliberately hidden or read-only. It’s normal to find that you can’t change things like:
- The internet connection type and login details.
- Firmware updates, which the ISP pushes remotely.
- Bridge mode, on some providers.
- DNS servers, on some providers.
- Voice or TV settings if the box handles phone or IPTV.
WiFi names, passwords, port forwarding and connected devices are almost always open to you. If you need something that’s locked, like bridge mode for your own router, ask your provider. They can often switch it on from their side.
Good settings to check on a Sagemcom gateway
- Change the WiFi password from the one on the label, especially if the box has been in a shared house or shop display.
- Set WiFi security to WPA2 or WPA2/WPA3.
- If the gateway offers band steering (one name for both bands), leave it on unless an older device struggles to connect.
- Turn off WPS if the option is there.
- Change the admin password, if your ISP allows it, and store it somewhere safe.
