TM Unifi Router Login: 192.168.0.1 and Password
Log in to TM Unifi at 192.168.0.1 or 192.168.1.1 with admin and the label password.
Connect to your TM Unifi router first by WiFi or cable. Unifi routers come from several brands, so check yours.
TM Unifi in Malaysia supplies routers from TP-Link, Huawei, ZTE and others. Most open at 192.168.0.1 or 192.168.1.1, depending on the brand.
The username is usually admin, with the password on the label. Here is how to log in, change WiFi and reset safely.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your TM Unifi router
- Connect your phone or computer to the router WiFi, or plug in an Ethernet cable.
- Open a browser and type http://192.168.0.1 in the address bar. Some brands use http://192.168.1.1.
- Enter the username and password from the table below or the router label.
- Once logged in, change the admin password and use WPA2 or WPA3 for WiFi.
If the page does not open, check your Default Gateway with our Router IP Finder. ISP builds sometimes use a different address.
The 192.168.0.1 address is the one I try first on any TM Unifi that will not open.
TM Unifi default IP, username and password
| Device | Login address | Username | Password |
|---|---|---|---|
| TP-Link Unifi routers (Archer) | 192.168.0.1 or tplinkwifi.net | admin | On the label or set at setup |
| Huawei Unifi routers | 192.168.1.1 or 192.168.3.1 | admin | On the label |
| ZTE Unifi routers | 192.168.1.1 | admin | On the label |
Your Unifi VLAN and PPPoE details must be kept. Note them before any reset. The keep-the-PPPoE-details warning is the one I stress first before any Unifi reset.
How to change the WiFi password on a TM Unifi router
- Log in to the router.
- Open Wireless or Wi-Fi settings.
- Change the network name and password.
- Save and reconnect devices.
The MyUnifi app also manages WiFi on supported routers. Need a strong key? Try our WiFi Password Generator. For me, the MyUnifi app is the quickest way to change WiFi on a supported Unifi router.
TM Unifi login problems and fixes
- 192.168.0.1 will not load: make sure you are on the router WiFi, not mobile data or a VPN, and type http:// in front.
- Wrong password: check the label first. If you or your ISP changed it, the defaults will not work.
- Page loads but login fails: clear the browser cache or try a private window. Some routers lock you out for a few minutes after several attempts.
- Router from your ISP: the provider may manage it. Their app or support line can reset the admin password.
- Still locked out: a factory reset restores the label login, but erases your settings.
I check the label before I touch anything else when a Unifi login will not work.
How to reset a TM Unifi router
- Keep the router powered on.
- Press and hold the reset button for about 10 seconds, until the lights flash.
- Release and wait 2 to 3 minutes.
- Log in with the default details and set up WiFi again.
After a reset, re-enter the Unifi PPPoE username and password, and VLAN 500 on routers that need it. The 10-second hold is the timing I trust before I reach for a reset on a Unifi.
Routers supplied with Unifi
TM Unifi in Malaysia has supplied routers from several makers, including TP-Link, Huawei, ZTE and others, so the login page depends on which one you have. Most open at 192.168.0.1 or 192.168.1.1, with the password on the label.
The MyUnifi app lets you check your plan, report faults and, on supported routers, manage WiFi settings. My first stop is the MyUnifi app whenever a plan detail or fault needs checking.
Using your own router with Unifi
You can replace or add to the Unifi router with your own, as long as you set it up correctly:
- Connection type: PPPoE.
- Username: your Unifi username, ending in @unifi.
- Password: your Unifi broadband password (ask TM if you don’t have it).
- VLAN ID: 500 for internet.
If you also have Unifi TV, extra VLAN settings are needed. Many people keep the TM router for TV and add their own router behind it for WiFi. The keep-the-TM-router-for-TV tip is the one I give first to anyone adding their own router.
Mesh and Unifi
For bigger homes, a mesh system in access point mode behind the Unifi router gives the best of both: TM’s router handles the connection and TV, the mesh handles WiFi. Turn off the Unifi router’s WiFi to avoid interference. I see the mesh-behind-the-router setup most often in bigger homes with dead spots.
