Hitron Router Login: 192.168.0.1 & cusadmin
Log in to Hitron at 192.168.0.1 with cusadmin and password or the label login. WiFi, bridge mode and reset.
Connect to your Hitron router first by WiFi or cable. Many ISP units print their own password on the label.
Hitron makes cable modems and gateways used by internet providers such as Rogers, Shaw and other cable operators. Most Hitron gateways open their admin page at 192.168.0.1.
The default login on many models is cusadmin with the password password, but ISP versions often print a unique password on the label. This guide covers the login, WiFi changes, bridge mode and resets.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your Hitron router
- Connect your phone or computer to the router WiFi, or plug in an Ethernet cable.
- Open a browser and type http://192.168.0.1 in the address bar.
- Enter the username and password from the table below or from the router label.
- After logging in, change the admin password and make sure WiFi security is WPA2 or WPA3.
If the page does not open, check your Default Gateway with our Router IP Finder. ISP builds sometimes use a different address.
The 192.168.0.1 address is the one I try first on any Hitron that will not open.
Hitron default IP, username and password
| Model | Default IP | Username | Password |
|---|---|---|---|
| CODA-4582 / CODA-4589 | 192.168.0.1 | cusadmin | password or label |
| CGNV4 / CGNV2 | 192.168.0.1 | cusadmin | password or label |
| CGNM-2252 / CGN3 | 192.168.0.1 | cusadmin | password |
| CODA-4782 | 192.168.0.1 | cusadmin | password or label |
| Other models | 192.168.0.1 | admin | admin or password |
If cusadmin and password fail, look for “Admin Password” or “GUI Password” on the label. Some providers lock parts of the menu, so you may need their app for WiFi changes. The label-password detail is the one I check first on any ISP-supplied Hitron.
How to change the WiFi password on a Hitron router
- Log in at 192.168.0.1.
- Open Wireless, then Basic Settings for the network name and Security for the password.
- Set security to WPA2-PSK or WPA2/WPA3 and enter a new pre-shared key.
- Click Save Changes and reconnect your devices.
On Rogers and Shaw gateways you can also change WiFi in the provider app. Need a strong key? Try our WiFi Password Generator. For me, the Wireless page is where every Hitron WiFi change starts. Hitron’s own MyHitron+ app covers the same settings on supported gateways.
Hitron bridge mode
If you want to use your own router, put the Hitron gateway in bridge mode. Log in, open Basic, then Gateway Function, and turn off Residential Gateway Function. The gateway restarts as a plain modem. In bridge mode, the gateway’s status page still answers at 192.168.100.1.
After this, 192.168.0.1 may no longer open the full menu. Plug your own router into port 1, and use its address, for example 192.168.1.1, for settings. To undo bridge mode, factory reset the Hitron. The bridge-mode-first step is the one I take before I plug a second router in.
Hitron login problems and fixes
- 192.168.0.1 will not load: make sure you are on the router WiFi, not mobile data or a VPN, and type http:// in front.
- Wrong password: check the label first. If you or your ISP changed it, the defaults will not work.
- Page loads but login fails: clear the browser cache or try a private window. Some routers lock you out for a few minutes after several attempts.
- Router from your ISP: the provider may manage it. Their app or support line can reset the admin password.
- Still locked out: a factory reset restores the label login, but erases your settings.
When a Hitron login will not work, I check the label before I touch anything else.
How to reset a Hitron router
- Keep the gateway powered on.
- Press and hold the reset button on the back for about 30 seconds.
- Release it and wait 3 to 5 minutes for the gateway to restart.
- Log in with cusadmin and the label password, then set up WiFi again.
A reset also turns off bridge mode and erases custom port forwards. The 30-second hold is the timing I trust before I reach for a reset on a Hitron.
