JioFiber Router Login: 192.168.29.1 & Password
Log in to JioFiber at 192.168.29.1 with admin and Jiocentrum. WiFi change, MyJio app and reset.
Connect to your JioFiber router first by WiFi or cable. Newer JioFiber routers may ask you to set a password.
JioFiber routers in India open their admin page at 192.168.29.1. The well known default login is admin with the password Jiocentrum, although newer firmware may ask you to change it on first login. Jio calls that admin page Jio Centrum.
You can also manage WiFi in the MyJio or JioHome app. This guide covers the web login, changing the WiFi password and fixing common errors.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your JioFiber router
- Connect your phone or computer to the router WiFi, or plug in an Ethernet cable.
- Open a browser and type http://192.168.29.1 in the address bar. Use https://192.168.29.1 if the plain address does not load, and accept the certificate warning.
- Enter the username and password from the table below or from the router label.
- After logging in, change the admin password and make sure WiFi security is WPA2 or WPA3.
If the page does not open, check your Default Gateway with our Router IP Finder. ISP builds sometimes use a different address.
I check the gateway first whenever a JioFiber page refuses to load.
JioFiber default IP, username and password
| Item | Default | Notes |
|---|---|---|
| Admin page | 192.168.29.1 | Also via https:// |
| Username | admin | Same on most units |
| Password | Jiocentrum | Case sensitive, changed on newer firmware |
| WiFi name | JioFiber-XXXX | Printed on the label |
| App | MyJio / JioHome | For WiFi and device control |
If Jiocentrum does not work, the password was changed. Use the MyJio app or a reset. For me, the label-password check is the first thing I do on any JioFiber.
How to change the WiFi password on a JioFiber router
- Log in at 192.168.29.1.
- Open Network, then WLAN or Wireless settings.
- Change the passphrase for 2.4 GHz and 5 GHz and save.
- Reconnect your devices with the new password.
In the MyJio app: open JioFiber, then Settings, then WiFi to change it from your phone. Need a strong key? Try our WiFi Password Generator. The MyJio-app route is the one I point at first for a quick password change.
JioFiber login problems and fixes
- 192.168.29.1 will not load: make sure you are on the router WiFi, not mobile data or a VPN, and type http:// in front.
- Wrong password: check the label first. If you or your ISP changed it, the defaults will not work.
- Page loads but login fails: clear the browser cache or try a private window. Some routers lock you out for a few minutes after several attempts.
- Router from your ISP: the provider may manage it. Their app or support line can reset the admin password.
- Still locked out: a factory reset restores the label login, but erases your settings.
I start with the label check whenever a JioFiber login will not work.
How to reset a JioFiber router
- Keep the router on.
- Press and hold the reset button for about 10 to 15 seconds.
- Release and wait several minutes. The router may reconnect and download settings from Jio.
- Log in again with admin and Jiocentrum or use the MyJio app.
Jio may need to reactivate the connection after a reset. Call Jio support if the internet light stays off. The 10-to-15-second hold is the timing I trust before I reach for a reset on a JioFiber.
What you can manage at 192.168.29.1
The JioFiber web page has more options than the MyJio app, though it’s less friendly to use. After logging in with admin and Jiocentrum (or your updated password), you can usually:
- Change the WiFi name and password for 2.4 GHz and 5 GHz.
- See connected devices and their IP addresses.
- Set up port forwarding for cameras or game consoles, on models where Jio allows it.
- Change the admin password for the web page.
- Check the router’s firmware and connection status.
Jio pushes firmware updates itself, and some options can change after an update. If a menu you used before has moved, look under Network or Settings. The port-forwarding row is the option I mention first when someone asks what the page can do.
Change your JioFiber WiFi password in the MyJio app
For a quick password change, the app is faster than the web page:
- Open the MyJio app and sign in with your JioFiber number.
- Tap your JioFiber connection, then Manage devices or WiFi settings.
- Pick the network you want to change.
- Enter a new name or password and save.
- Reconnect your devices with the new password.
The JioFiber router and the JioFiber set-top box both connect to the same network. If you change the WiFi password, the set-top box usually reconnects on its own if it’s wired, but check it if TV stops working.
My first stop is the MyJio app whenever a password change needs doing on a JioFiber.
Using your own router with JioFiber
You can plug a router of your own into the JioFiber box, for better coverage or features. Connect it from a LAN port on the Jio router to the WAN port on yours. The access-point workaround is the setup I fall back on when bridge mode is missing.
This creates double NAT, which is fine for browsing and streaming but can upset online gaming. Jio doesn’t offer a true bridge mode on most units, so a common workaround is to put your own router into access point mode and let the Jio box keep handling the connection.
