TalkTalk Router Login: IP, Username and Password
Log in to TalkTalk at 192.168.1.1 with admin and the router password on the label.
Connect to your TalkTalk router first by WiFi or cable. TalkTalk Wi-Fi Hub and older Super Router use 192.168.1.1.
TalkTalk Wi-Fi Hub, Super Router and Wi-Fi Hub+ units in the UK open their settings at 192.168.1.1.
The username is admin and the password is the router or admin password printed on the back, separate from the WiFi key. Here is how to log in, change WiFi and reset.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your TalkTalk router
- Connect your phone or computer to the router WiFi, or plug in an Ethernet cable.
- Open a browser and type http://192.168.1.1 in the address bar.
- Enter the username and password from the table below or the router label.
- Once logged in, change the admin password and use WPA2 or WPA3 for WiFi.
If the page does not open, check your Default Gateway with our Router IP Finder. ISP builds sometimes use a different address.
TalkTalk default IP, username and password
| Device | Login address | Username | Password |
|---|---|---|---|
| TalkTalk Wi-Fi Hub (Sagemcom) | 192.168.1.1 | admin | Router password on label |
| Super Router (Huawei) | 192.168.1.1 | admin | Admin password on label |
| Wi-Fi Hub+ | 192.168.1.1 | admin | On the label |
Use the admin password, not the WiFi key.
How to change the WiFi password on a TalkTalk router
- Log in at 192.168.1.1.
- Open Wireless or Wi-Fi.
- Change the network name and key and save.
- Reconnect devices.
The My TalkTalk app can also help. Need a strong key? Try our WiFi Password Generator.
TalkTalk login problems and fixes
- 192.168.1.1 will not load: make sure you are on the router WiFi, not mobile data or a VPN, and type http:// in front.
- Wrong password: check the label first. If you or your ISP changed it, the defaults will not work.
- Page loads but login fails: clear the browser cache or try a private window. Some routers lock you out for a few minutes after several attempts.
- Router from your ISP: the provider may manage it. Their app or support line can reset the admin password.
- Still locked out: a factory reset restores the label login, but erases your settings.
How to reset a TalkTalk router
- Keep the router powered on.
- Press and hold the reset button for about 15 seconds, until the lights flash.
- Release and wait 2 to 3 minutes.
- Log in with the default details and set up WiFi again.
Your connection reconnects automatically on most TalkTalk plans.
TalkTalk Wi-Fi Hub models
TalkTalk’s current router is the Wi-Fi Hub, with older customers on the Super Router or the Huawei and Sagemcom models that came before. They open at 192.168.1.1, and the router password is on the label or a card in the box.
You can also manage basic settings in the My TalkTalk app.
Using your own router with TalkTalk
TalkTalk uses DHCP on most of its fibre lines, which makes swapping in your own router fairly simple:
- On full fibre, connect your router to the ONT and set the WAN to DHCP (automatic IP).
- On fibre to the cabinet, you need a router with a VDSL modem, also set to DHCP.
- Check TalkTalk’s help pages for any VLAN or extra settings for your line type.
Keep the TalkTalk hub safe in case support asks you to test with it.
TalkTalk Wi-Fi Hub settings to check
- Change the admin password if your hub allows it.
- Turn off WPS.
- Check whether Smart WiFi (one name for both bands) suits your devices.
- Turn off the hub’s WiFi if you add your own mesh system.
