TOTOLINK Router Login: IP, Username and Password
Log in to TOTOLINK at 192.168.0.1 or itotolink.net with admin and admin. Extenders, WiFi and reset.
Connect to your TOTOLINK router first by WiFi or cable. Some models use 192.168.1.1 or the web address itotolink.net.
TOTOLINK routers and extenders are popular budget options in Asia, Europe and Latin America. Most open their settings at 192.168.0.1, while some older and mesh models use 192.168.1.1.
The usual default login is admin and admin. Newer models ask you to set a password during the first setup. Here is how to log in, change WiFi and reset.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your TOTOLINK router
- Connect your phone or computer to the router WiFi, or plug in an Ethernet cable.
- Open a browser and type http://192.168.0.1 in the address bar. On many newer models you can also use http://itotolink.net.
- Enter the username and password from the table below or from the router label.
- After logging in, change the admin password and make sure WiFi security is WPA2 or WPA3.
If the page does not open, check your Default Gateway with our Router IP Finder. ISP builds sometimes use a different address.
The itotolink.net address is the one I try first on newer models.
TOTOLINK default IP, username and password
| Model type | Default IP | Username | Password |
|---|---|---|---|
| Most TOTOLINK routers | 192.168.0.1 | admin | admin |
| N150RT, A6004NS and some older models | 192.168.1.1 | admin | admin |
| Extenders (EX series) | 192.168.0.254 or 192.168.1.254 | admin | admin |
| Newer models | 192.168.0.1 or itotolink.net | admin | Set during setup |
If neither address works, check the label on the bottom of the router, or your Default Gateway. When neither address works, the label on the bottom is where I look.
How to change the WiFi password on a TOTOLINK router
- Log in at 192.168.0.1 or itotolink.net.
- Open Wireless or Wi-Fi settings for 2.4 GHz and 5 GHz.
- Set encryption to WPA2-PSK and type a new password.
- Click Apply and reconnect your devices.
Easy Setup on the home screen also lets you change the WiFi name and password in one step. Need a strong key? Try our WiFi Password Generator. For a quick password change, the Easy Setup screen is the route I take.
TOTOLINK login problems and fixes
- 192.168.0.1 will not load: make sure you are on the router WiFi, not mobile data or a VPN, and type http:// in front.
- Wrong password: check the label first. If you or your ISP changed it, the defaults will not work.
- Page loads but login fails: clear the browser cache or try a private window. Some routers lock you out for a few minutes after several attempts.
- Router from your ISP: the provider may manage it. Their app or support line can reset the admin password.
- Still locked out: a factory reset restores the label login, but erases your settings.
The mobile-data mix-up is the cause I rule out first when the page will not load.
How to reset a TOTOLINK router
- Keep the router powered on.
- Hold the RST/WPS button for about 5 to 10 seconds until the LEDs flash.
- Release and wait about 2 minutes.
- Log in again at 192.168.0.1 with admin and admin.
On some models a short press of the same button starts WPS, so hold it long enough for a reset. My rule is a long hold, since a short press just starts WPS.
What you can change once you’re inside TOTOLINK
TOTOLINK’s web page looks plain, but it covers most of what a home needs. After the first login you’ll usually land on an Easy Setup screen. Click through to the advanced view to see everything.
- Internet setup: pick DHCP, PPPoE or static IP, depending on what your provider gave you.
- Wireless: network names, passwords and channels for 2.4 GHz and 5 GHz, plus a guest network on most dual-band models.
- Parental controls and URL filters: block sites or set times a device can go online.
- QoS: limit bandwidth per device so one download doesn’t ruin everyone’s video call.
- Port forwarding and DMZ: for game consoles, cameras and home servers.
- Management: admin password, time zone, backups and firmware upgrades.
Menu names shift a little between models like the A3002RU, X5000R and N300RT, but the layout is close enough that you’ll find your way around after one visit. The advanced view is the screen I open first after the first login.
Secure a TOTOLINK router in five minutes
TOTOLINK routers ship with admin/admin, which anyone on your WiFi can guess. These steps lock things down without breaking anything:
- Change the admin password under the management or system section. Use something you don’t use anywhere else.
- Set WiFi security to WPA2-PSK, or WPA2/WPA3 mixed if your model offers it.
- Turn off WPS on the wireless page. Very few people use it, and it’s an easy way in for attackers.
- Switch off remote management unless you really need to reach the router from outside.
- Check for a firmware update. TOTOLINK posts files on its support site by model and hardware version.
The hardware version (V1, V2 and so on) is printed on the label next to the model number. Firmware for the wrong version can brick the router, so match both before uploading anything.
I change the admin password first on any TOTOLINK I set up.
TOTOLINK extenders and mesh units log in differently
If you’re trying to reach a TOTOLINK range extender rather than a router, the address is often different. Many extenders use 192.168.0.254, and some newer ones open with a setup page at itotolink.net when you’re connected to the extender’s own WiFi.
Once an extender joins your main network, it gets a new IP from your router. To log in again later, check your router’s connected devices list for the extender’s address, or connect straight to it with a cable and use the default address.
For an extender’s new address, the connected-devices list is where I look first.
