Pakedge Router Login: Default IP & Password
I have set up Pakedge routers in smart homes, and the same thing trips owners…
I have set up Pakedge routers in smart homes, and the same thing trips owners up every time. The brand hides its login behind installer jargon, so the admin page feels locked even when the network works fine. Your gateway is online, and the settings sit one login away.
This guide gives you the Pakedge login, the model table, and the steps that get you in.
Most Pakedge routers log in at 192.168.1.1 with the username admin and the password admin. The RK-1 uses 192.168.1.99 with pakedge and pakedger instead, so check your model in the table below.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. If your model is an RK-1, use 192.168.1.99 or pakedgerouter.com instead.
How to Log in to a Pakedge Router
I walk through this in the same order every time, because the order keeps a login from going wrong. Check the model on the label of your own router before you type anything.
- Connect your computer to the Pakedge router with an Ethernet cable or over its Wi-Fi network.
- Open a browser and go to 192.168.1.1. On an RK-1, RE-1, or RE-2, go to 192.168.1.99 or type pakedgerouter.com instead.
- Type admin in the username field and admin in the password field, then click Login.
- On your first login, the WR-1 asks you to change the password. Pick a strong new password and write it down.
- The admin panel opens, and you can change the Wi-Fi details or check connected devices.

Pakedge Default Username and Password
I have seen this catch owners out: Pakedge is a custom-install brand, so one login does not fit every box. The table below lists every model I could verify from the manuals, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| WR-1 | admin | admin | 192.168.1.1 |
| RK-1 / RE-1 / RE-2 | pakedge | pakedger | 192.168.1.99 |
| WA-2200-1 | admin | password | 192.168.1.21 |
| WK Series (access points) | pakedge | pakedgea | 192.168.1.250 |
If your model is not in the table, start with admin and admin at 192.168.1.1. That is the combination the WR-1 ships with, and it is the router most Pakedge owners have at home.
Change Pakedge WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory key is printed in the manual for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at your Pakedge router’s address with your admin password.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
The WR-1 ships with the Wi-Fi password pakedgewireless, so change it first if you have never done so. Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else.
Pakedge Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the Pakedge network, not to mobile data or a different Wi-Fi network.
- Check that the WAN cable is plugged into the port labelled WAN, and that you are on a LAN port or the Pakedge Wi-Fi.
- Try the right address for your model. The WR-1 uses 192.168.1.1, but the RK-1 uses 192.168.1.99.
- Try admin and admin first, then pakedge and pakedger if your model is an RK-1 or RE-1.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press the reset button on the rear panel and hold it for about 10 seconds, then let go.
A reset erases every setting, and the WR-1 will ask you to set a new password at first login. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Most Pakedge routers answer at 192.168.1.1 with admin and admin. Pakedge routers with BakPak can also be managed remotely through the BakPak cloud service once they are registered.










