Skylink Router Login: Default IP & Password
I have helped with SkyLink logins, and the same thing trips owners up every time….
I have helped with SkyLink logins, and the same thing trips owners up every time. The brand is small, so most guides guess the login, and the guesses disagree. Your gateway is online, the settings sit one login away, and the page gives no clue what it wants.
This guide gives you the SkyLink login, the model table, and the steps that get you in.
Most SkyLink routers log in at 192.168.0.1 with the username admin and the password admin. Try a blank password second if admin fails, and check the model table below for your exact unit.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.0.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.0.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.
How to Log in to a SkyLink Router
I walk through this in the same order every time, because the order keeps a login from going wrong. Check the model on the label of your own router before you type anything.
- Connect your computer or phone to the SkyLink router with an Ethernet cable or over Wi-Fi.
- Open a browser and go to 192.168.0.1. Type the address into the address bar, not the search bar.
- Type admin in the username field and admin in the password field, then click Log In or OK.
- If admin fails, try admin with a blank password. That is the second combination listed for this brand.
- The admin panel opens, and you can change the Wi-Fi details or check connected devices.

SkyLink Default Username and Password
I have seen this catch owners out: SkyLink is a small brand, so one login fits almost every router, but the satellite and smart-home boxes break the pattern. The table below lists every model I could verify, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| SL-R7205 (XDX-RN502J) | admin | admin | 192.168.0.1 |
| V-FL500 | admin | admin | 192.168.0.1 |
| HU-318 (smart-home hub) | admin | admin | (device IP):8081 |
| SkyLink 5100 (satellite) | admin | admin | 192.168.111.1 |
If your model is not in the table, start with admin and admin at 192.168.0.1. That is the combination the router models ship with, and a blank password is the fallback to try next.
Change SkyLink WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory password is the same on every unit. Once you are logged in, the change takes about a minute.
- Log in at 192.168.0.1 with your admin password.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
SkyLink Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the SkyLink network, not to mobile data or a different Wi-Fi network.
- Check that the WAN cable is plugged into the port labelled WAN, and that you are on a LAN port or the SkyLink Wi-Fi.
- Try admin first, then a blank password. The Wi-Fi password and the admin password are not the same thing.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button for about 10 seconds with a paperclip, then let go.
A reset erases every setting, and you will need to set the router up again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Most SkyLink routers answer at 192.168.0.1 with admin and admin. The HU-318 hub and the SkyLink 5100 satellite terminal use the same password, but on their own addresses.










