Frontier Router Login: IP, Username and Password
Log in to Frontier routers at 192.168.1.1, 192.168.1.254 or 192.168.254.254 with the label password.
Connect to your Frontier router first by WiFi or cable. Frontier uses several router brands, so check your model.
Frontier supplies routers from several makers, so the login depends on your model. Fiber routers from Arcadyan, Actiontec and Sagemcom often use 192.168.1.1, older Arris DSL gateways use 192.168.1.254, and some Sagemcom units use 192.168.254.254.
Most Frontier routers print the admin password on the label. Newer fiber service may come with eero, managed only in the eero app. The MyFrontier app covers your account and service tasks.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to your Frontier router
- Connect your phone or computer to the modem WiFi, or plug in an Ethernet cable.
- Open a browser and type http://192.168.1.1 in the address bar. Older DSL gateways use 192.168.1.254.
- Enter the admin username and password from the label or the table below.
- Once logged in, change the admin password and check that WiFi security is WPA2 or WPA3.
If the page does not open, check your Default Gateway with our Router IP Finder. ISP builds sometimes use a different address.
The 192.168.1.1 address is the one I try first on any Frontier that will not open.
Frontier default IP, username and password
| Device | Login address | Username | Password |
|---|---|---|---|
| Frontier fiber routers (Arcadyan, Actiontec) | 192.168.1.1 | admin | On the label |
| Arris NVG468MQ (DSL) | 192.168.1.254 | None | Device Access Code on label |
| Sagemcom (FAST 5260, SE567) | 192.168.254.254 | admin | On the label |
| eero (newer fiber) | eero app | eero account | None |
The label may call the password Admin Password or Device Access Code. The Device-Access-Code wording is the label detail I look for first on an Arris gateway.
How to change the WiFi password on a Frontier router
- Log in to your Frontier router.
- Open Wireless or Wi-Fi settings.
- Change the network name and password, then save.
- Reconnect your devices.
eero users change WiFi in the eero app. Need a strong key? Try our WiFi Password Generator. For me, the eero app is where every Frontier WiFi change starts on newer fiber.
Frontier login problems and fixes
- 192.168.1.1 will not load: make sure you are on the router WiFi, not mobile data or a VPN, and type http:// in front.
- Wrong password: check the label first. If you or your ISP changed it, the defaults will not work.
- Page loads but login fails: clear the browser cache or try a private window. Some routers lock you out for a few minutes after several attempts.
- Router from your ISP: the provider may manage it. Their app or support line can reset the admin password.
- Still locked out: a factory reset restores the label login, but erases your settings.
I start with the label check whenever a Frontier login will not work.
How to reset a Frontier router
- Keep the modem powered on.
- Press and hold the reset button for about 15 seconds.
- Release and wait several minutes while it restarts and reconnects.
- Log in with the label details and set up WiFi again.
Fiber routers reconnect automatically. DSL may need your Frontier login. The 15-second hold is the timing I trust before I reach for a reset on a Frontier.
Frontier equipment by service type
Frontier’s equipment depends on whether you have fibre or DSL:
- Frontier Fiber: often eero mesh systems or Frontier-branded WiFi 6 routers, managed in an app.
- Older fibre installs: Arris or Arcadyan routers that open at 192.168.1.1.
- DSL: modem-routers with the admin password on the label.
Check the label on your device for its address and password. If you have eero, use the eero app instead of a web page. The eero-versus-label split is the detail I sort out first on a Frontier install.
Using your own router with Frontier Fiber
- Find the ONT, usually a box on an inside or outside wall.
- On many newer installs, the ONT provides internet over Ethernet.
- Plug your router’s WAN port into the ONT and set WAN to DHCP.
- If it doesn’t connect, the ONT may need to be released from the old router. Restart the ONT or call Frontier.
The ONT-first order is the setup I follow before I plug a second router in.
Frontier and eero Plus
If Frontier supplied eero equipment, you may also have access to eero Plus features like ad blocking, content filters and a VPN, depending on your plan. Check the eero app under Discover or eero Plus. You manage everything there, not at a web address.
The ad-blocking perk is the eero Plus detail I mention first to new Frontier fiber owners.
Frontier Fiber not connecting
- Check the ONT lights: power, PON and LAN should be on.
- Make sure the Ethernet cable from the ONT to the router is secure.
- Restart the ONT, then the router.
- If the PON light is off or red, contact Frontier.
The PON-light check is the step I take first when Frontier fiber stops connecting.
