Askey RAC2V1K Default Login, Password & IP

Askey RAC2V1K Default Login and Password The Askey RAC2V1K is the router Spectrum hands out…

Askey RAC2V1K Default Login and Password

The Askey RAC2V1K is the router Spectrum hands out with its internet plans, and the login is simpler than most people expect. I have seen owners hunt for a password on the label when the real default is the plain admin/admin pair from the manual.

This guide gives you the correct RAC2V1K defaults, the login steps, and the reset fix that works when nothing else does.

Log in to the Askey RAC2V1K at 192.168.1.1 with the username admin and the password admin.

The fastest way in: tap the button below, then sign in with the details in the box.

🔐 Askey RAC2V1K Admin Login

IP Address: 192.168.1.1

Username: admin

Password: admin

Login to Admin Panel →

This button opens our 192.168.1.1 guide, which takes you on to the router login page. It works only when your device is connected to this router, by WiFi or cable.

Askey RAC2V1K Default Login Details

I checked these defaults against the RAC2V1K user manual before I wrote them down, so the table below matches the router you have in front of you.

The manual lists admin/admin as the default for the normal user login. Keep the defaults somewhere safe once you have logged in, and change the admin password to something only you know.

DetailValue
Login IP192.168.1.1
Usernameadmin
Passwordadmin

How to Log In to the Askey RAC2V1K

I walk through this in the same order every time, because the order is what keeps a login from going wrong. Spectrum manages this router as part of its service, so the Spectrum login guide covers the app-managed side of the same hardware.

  1. Connect your computer or phone to the RAC2V1K with an Ethernet cable or over Wi-Fi.
  2. Open a browser and go to 192.168.1.1.
  3. Type admin in the username field and admin in the password field, then click Login.
  4. The web interface opens, and you can change the Wi-Fi name and password, check connected devices, or look at the router status.

Default Username and Password — All Variants

I have seen this catch owners out: the RAC2V1K manual also describes a separate root user login for advanced settings, so check which case matches what you need.

For everyday settings, the normal user login below is the one to use:

LoginUsernamePassword
Normal user (everyday settings)adminadmin
Root user (advanced settings)rootPassword set by Spectrum

The root login is for advanced routing and TR-069 settings, and Spectrum sets its password. I would stay with the normal admin login unless your ISP tells you otherwise. The Askey login guide lists the label-password versions across the whole Askey range.

Change WiFi Password and Network Name

I change the Wi-Fi password first on every router I set up, because the factory password is the same on every unit that leaves the shop.

Once you are logged in to the RAC2V1K web interface, changing the Wi-Fi details takes about a minute:

  1. Log in at 192.168.1.1 with the admin password.
  2. Open the Wireless settings section of the web interface.
  3. Change the network name (SSID) for the 2.4 GHz and 5 GHz bands, or leave it as it is.
  4. Type a new Wi-Fi password, then save the settings.
  5. Reconnect your devices with the new password.

Use a password of at least 12 characters with a mix of letters and numbers, and avoid reusing a password you use anywhere else.

Login Not Working?

I start with the connection itself, because that is where most login failures begin, and I work through the list in the order it is written.

If the login page will not open or the password is rejected, work through these fixes:

  • Make sure your device is connected to the RAC2V1K network, not to mobile data or a different Wi-Fi network.
  • Type the address exactly: 192.168.1.1, with no extra letters or spaces.
  • Try a different browser, or clear the browser cache and try again.
  • Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
  • Restart the router: unplug it, wait 30 seconds, and plug it back in.

If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press a pin into the recessed Reset button and hold about 10 seconds until the LEDs blink.

After the reset, log in again with the factory defaults above, and set up the router from scratch. A reset can also clear Spectrum settings, so check with Spectrum if the router does not come back online.

Key specs: The Askey RAC2V1K is an 802.11ac Wave 2 dual-band router (also sold as the Askey FAST 5280) with four Gigabit Ethernet ports.

FAQs About askey rac2v1k login

The default username is admin and the default password is admin, at the login IP 192.168.1.1. That is the normal user login from the RAC2V1K manual, and it works on Spectrum-supplied units.

Connect to the router, open a browser, go to 192.168.1.1, and enter admin as the username and admin as the password. I always connect by cable for the first login, because a weak Wi-Fi signal can cut the page off halfway.

Most often the device is not connected to the router, or the address was typed wrong. Connect to the RAC2V1K network, type 192.168.1.1 exactly, try another browser, and restart the router if the page still does not load.

Press a pin into the recessed Reset button and hold about 10 seconds until the LEDs blink. A factory reset erases every setting, including the Wi-Fi name and password, so you will need to set the router up again and log in with the factory defaults.

The team behind this guide
Omar Haddad

Omar Haddad found this topic
Keyword Analyst
Focus: Search Data & Demand

Megan Taylor

Megan Taylor wrote this guide
Content Writer · Published November 15, 2026
Focus: Buying Guides

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts