Technicolor CGM4140COM Default Login, Password & IP

Technicolor CGM4140COM Default Login and Password The Technicolor CGM4140COM is the gateway Xfinity ships as…

Technicolor CGM4140COM Default Login and Password

The Technicolor CGM4140COM is the gateway Xfinity ships as the XB6, and its login trips people up in one specific way. I have seen owners type the right password into the wrong page, because Xfinity moved the admin page behind the Xfinity app on newer setups.

This guide gives you the correct CGM4140COM defaults, the login steps, and the app-first fix that gets the admin page back.

Log in to the Technicolor CGM4140COM at 10.0.0.1 with the username admin and the password password.

The fastest way in: tap the button below, then sign in with the details in the box.

🔐 Technicolor CGM4140COM Admin Login

IP Address: 10.0.0.1

Username: admin

Password: password

Login to Admin Panel →

This button opens our 10.0.0.1 guide, which takes you on to the gateway login page. It works only when your device is connected to this gateway, by WiFi or cable.

Technicolor CGM4140COM Default Login Details

I checked these defaults against the CGM4140COM setup guides before I wrote them down, so the table below matches the gateway you have in front of you.

Xfinity versions of this cable gateway answer at 10.0.0.1, not at the 192.168.0.1 other Technicolor cable gateways use. Keep the defaults somewhere safe once you have logged in, and change the admin password to something only you know.

DetailValue
Login IP10.0.0.1 (Xfinity)
Usernameadmin
Passwordpassword

How to Log In to the Technicolor CGM4140COM

I walk through this in the same order every time, because the order is what keeps a login from going wrong. On Xfinity, the browser Admin Tool can be off until you enable it in the Xfinity app, so the Xfinity login guide covers that app-first step in full.

  1. Connect your computer or phone to the CGM4140COM with an Ethernet cable or over Wi-Fi.
  2. Open a browser and go to 10.0.0.1.
  3. Type admin in the username field and password in the password field.
  4. Click Log In. The Admin Tool opens, and you can change the Wi-Fi name and password, check connected devices, or look at the gateway status.

If 10.0.0.1 shows no login page at all, open the Xfinity app first and turn on Admin Tool online access there. I check the app before I blame the password, because on XB6 gateways the browser page stays off until the app enables it. If your gateway is not an Xfinity unit, try 192.168.0.1 instead.

Default Username and Password — All Variants

I have seen this catch owners out: the same model can ask for a different password on another ISP build, so check which case matches your gateway.

The CGM4140COM most often uses admin with password. Try the other two combos below before you reset anything:

VersionUsernamePassword
Most common (Xfinity)adminpassword
Other buildsadminadmin
Other buildsadminAccess key on the label

If none of the three work, check the label on the bottom of the gateway. Some ISP versions print a unique access key there, and that key is the password. The Technicolor login guide lists the label-password versions across the whole Technicolor range.

Change WiFi Password and Network Name

I change the Wi-Fi password first on every router I set up, because the factory password is the same on every unit that leaves the shop.

Once you are logged in to the CGM4140COM Admin Tool, changing the Wi-Fi details takes about a minute:

  1. Log in at 10.0.0.1 with the admin password.
  2. Open the Gateway menu, then Connection, then Wi-Fi.
  3. Change the network name (SSID) for the 2.4 GHz and 5 GHz bands, or leave it as it is.
  4. Type a new Wi-Fi password, then save the settings.
  5. Reconnect your devices with the new password.

You can also change the Wi-Fi password in the Xfinity app, which I use when the browser Admin Tool is turned off. Use a password of at least 12 characters with a mix of letters and numbers, and avoid reusing a password you use anywhere else.

Login Not Working?

I start with the connection itself, because that is where most login failures begin, and I work through the list in the order it is written.

If the login page will not open or the password is rejected, work through these fixes:

  • Make sure your device is connected to the CGM4140COM network, not to mobile data or a different Wi-Fi network.
  • Type the address exactly: 10.0.0.1, with no extra letters or spaces. Try 192.168.0.1 only if yours is not an Xfinity unit.
  • Open the Xfinity app and check that Admin Tool online access is turned on. On XB6 gateways the browser page stays off without it.
  • Try a different browser, or clear the browser cache and try again.
  • Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
  • Restart the gateway: unplug it, wait 30 seconds, and plug it back in.

If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press a pin into the recessed Reset button and hold about 10 seconds until the LEDs blink. After the reset, log in again with the factory defaults above, and set up the gateway from scratch.

Key specs: The Technicolor CGM4140COM is a DOCSIS 3.1 voice gateway (Xfinity XB6) with dual-band Wi-Fi 5 and four Gigabit Ethernet ports.

FAQs About technicolor cgm4140com login

The default username is admin and the default password is password, at the login IP 10.0.0.1 on Xfinity. Non-Xfinity builds may answer at 192.168.0.1 instead, so try that address if 10.0.0.1 does not load.

Connect to the gateway, open a browser, go to 10.0.0.1, and enter admin as the username and password as the password. If no login page appears, open the Xfinity app first and turn on Admin Tool online access.

Most often the Admin Tool is turned off in the Xfinity app, or the device is not connected to the gateway. Enable Admin Tool access in the app, connect to the CGM4140COM network, type 10.0.0.1 exactly, and restart the gateway if the page still does not load.

Press a pin into the recessed Reset button and hold about 10 seconds until the LEDs blink. A factory reset erases every setting, including the Wi-Fi name and password, so you will need to set the gateway up again and log in with the factory defaults.

The team behind this guide
Rachel Kim

Rachel Kim found this topic
Topic Researcher
Focus: Reader Questions & Trends

Jessica Alvarez

Jessica Alvarez wrote this guide
Content Writer · Published November 15, 2026
Focus: Home Networking

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts