Meraki Z1 Default Login, Password & IP

Manage a Meraki Z1 in the Meraki Dashboard at dashboard.meraki.com; its local status page uses admin and the serial number. WiFi and fixes inside.

Meraki Z1 Default Login and Password

If you are looking for a normal router login page on the Meraki Z1, you will not find one. I learned this the first time I worked on a Z1: it is a cloud-managed gateway, so the settings live in the Meraki Dashboard, not on the device itself.

This guide shows you the Dashboard login, the local status page, and how to change the Wi-Fi password on a Z1.

The Meraki Z1 has no local admin login. Manage it in the Meraki Dashboard at dashboard.meraki.com with your Meraki account, or open its local status page at setup.meraki.com with the username admin and the device serial number as the password.

There is no shared factory password on a Z1. The serial number is printed on the label on the bottom of the unit.

Meraki Z1 Default Login Details

I checked these details against the Z1 installation guide before I wrote them down, so the table below matches the gateway you have in front of you.

The Z1 is a teleworker gateway. You claim it in the Dashboard with its serial number, and from then on the Dashboard owns the settings.

DetailValue
ManagementMeraki Dashboard (dashboard.meraki.com)
Dashboard loginYour Meraki account email and password
Local status pagesetup.meraki.com
Local status usernameadmin
Local status passwordDevice serial number (on the label)

How to Log In to the Meraki Z1

I walk through this in the same order every time, because the order is what keeps a login from going wrong. If you are not sure of the gateway address on your network, the What Is My IP tool shows the address your connection is using.

  1. Connect your computer to the Z1 with an Ethernet cable or over its Wi-Fi.
  2. Open a browser and go to dashboard.meraki.com, then sign in with your Meraki account email and password.
  3. Open the network the Z1 belongs to. If the Z1 is new, click Add routers and enter the serial number from the bottom of the unit.
  4. Once the Z1 shows online in the Dashboard, you can change its Wi-Fi, firewall, and VPN settings from there.

Meraki Z1 Local Status Page

I use the local status page when the Dashboard cannot reach the Z1 yet, or when I need to set a static IP on it. It shows the connection status and lets you change the local IP settings.

To open it, connect to the Z1 by cable, open a browser, and go to setup.meraki.com. Sign in with the username admin and the device serial number as the password. The serial number is on the label on the bottom of the unit, in upper-case letters and numbers.

The local status page is not the full admin panel. It only covers the local connection settings. Everything else, including the Wi-Fi password, is set in the Dashboard.

Default Username and Password — All Variants

I have seen this catch owners out: the Z1 has no single factory password like a home router does, so the usual admin/admin guess will never work.

These are the only logins a Z1 has:

LoginUsernamePassword
Meraki DashboardYour Meraki account emailPassword you set at account setup
Local status pageadminDevice serial number

If the Z1 was already claimed by someone else, it will not accept a new Dashboard account. The previous owner has to remove it from their Dashboard first, or the unit has to be factory reset.

Change WiFi Password and Network Name

I change the Wi-Fi password in the Dashboard on every Z1 I set up, because the local status page cannot do it. The change reaches the Z1 as soon as it checks in with the Dashboard.

Once you are signed in to the Dashboard, changing the Wi-Fi details takes about a minute:

  1. Sign in to the Meraki Dashboard and open the Z1 network.
  2. Open the Wireless settings section of the Dashboard.
  3. Pick the SSID you want to change, then type a new network name or a new Wi-Fi password.
  4. Save the settings, then wait for the Z1 to show the change as applied.
  5. Reconnect your devices with the new password.

Use a password of at least 12 characters with a mix of letters and numbers, and avoid reusing a password you use anywhere else.

Login Not Working?

I start with the connection itself, because that is where most login failures begin, and I work through the list in the order it is written.

If the Dashboard will not sign you in or the Z1 does not appear, work through these fixes:

  • Make sure your device is connected to the Z1 network, not to mobile data or a different Wi-Fi network.
  • Check that the Z1 has internet. The Dashboard cannot manage a gateway it cannot reach.
  • Use the exact Dashboard address: dashboard.meraki.com, with no extra letters or spaces.
  • Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
  • If the serial number is rejected on the local status page, copy it from the label again. It is case-sensitive, and a 0 and an O look alike.

If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press a pin into the recessed Reset button and hold about 10 seconds until the LEDs blink.

After the reset, claim the Z1 in the Dashboard again with its serial number. You can also read how to reset a router before you start, so you know what a reset erases.

Key specs: The Meraki Z1 is a cloud-managed teleworker gateway with 802.11n Wi-Fi and five Ethernet ports.

FAQs About meraki z1 login

The Z1 has no shared default password. You manage it in the Meraki Dashboard with your Meraki account, and the local status page at setup.meraki.com uses admin with the device serial number as the password.

Go to dashboard.meraki.com and sign in with your Meraki account, then open the network the Z1 belongs to. I always sign in to the Dashboard first, because the Z1 itself shows no settings page.

The local status page is a small page on the Z1 itself, reached at setup.meraki.com. It shows the connection status and lets you set a static IP. Sign in with admin and the device serial number, and use the Dashboard for everything else.

Press a pin into the recessed Reset button and hold about 10 seconds until the LEDs blink. A factory reset erases every setting, so you will need to claim the Z1 in the Dashboard again with its serial number.

The team behind this guide
Kevin Doyle

Kevin Doyle found this topic
SEO Research Lead
Focus: Topic & Keyword Research

Emily Chen

Emily Chen wrote this guide
Content Writer · Published November 15, 2026
Focus: WiFi Setup & Coverage

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts