Linksys EA6350 Login: Router Admin Setup Guide
The first time I set up an EA6350, the login page asked for a password…
The first time I set up an EA6350, the login page asked for a password and nothing else, and I kept looking for a username box that was not there. I have since learned the EA6350 logs in with a password only, so the username stays blank.
This guide gives you the correct defaults for the EA6350 and the four steps that will get you into the admin panel.
Log in at 192.168.1.1 with the password admin — there is no username, so leave it blank (type admin as the username only if a field asks for one).
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: (none — password-only login; use admin if a username is requested)
Password: admin
Login to Admin Panel →This button opens your router’s own login page. It works only when your device is connected to this router, by WiFi or cable.
Linksys EA6350 Default Login Details
I checked these defaults against the EA6350 setup flow before I wrote them down, so the table below matches the router you have in front of you.
These are the factory defaults for the EA6350: the Linksys Smart Wi-Fi login is password-only — there is no default username — the default password is admin, and the LAN IP address is 192.168.1.1. Keep them somewhere safe once you have logged in, and change the admin password to something only you know.
| Detail | Value |
|---|---|
| Login IP | 192.168.1.1 |
| Username | (none — password-only login; use admin if a username is requested) |
| Password | admin |
How to Log In to the Linksys EA6350
I walk through this in the same order every time, because the order is what keeps a login from going wrong. If a username field asks for one, type admin, and the Linksys login guide covers the EA6350 setup flow too.
- Connect your computer or phone to the EA6350 with an Ethernet cable or over Wi-Fi.
- Open a browser and go to 192.168.1.1. You can also open linksyssmartwifi.com, which takes you to the same login page.
- Type admin in the password field. The Linksys Smart Wi-Fi login is password-only, so leave the username field blank — if a username is requested, use admin.
- Click Log in. The admin panel opens, and you can change the Wi-Fi name and password, update the firmware, and check who is connected.
Default Username and Password — All Variants
I have seen this catch owners out: some Linksys models log in with a password only, so check which case matches your router before you type anything.
The EA6350 v2 and v3 share the same factory defaults. If the login asks for a password you did not set, check the variant below before resetting the router.
| Version | Username | Password |
|---|---|---|
| Factory default (v2 and v3) | (none — password-only login; use admin if a username is requested) | admin |
| admin/admin on some firmware/ISP pages | admin | admin |
| After a password change | (none) | The factory default no longer works — use the password you set, or reset the router to restore it. |
Change WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because every device in the house connects with it.
Once you are logged in to the EA6350 admin panel, changing the Wi-Fi details takes about a minute.
- Log in at 192.168.1.1 with the admin password.
- Open the Wireless settings section of the admin panel.
- Change the network name (SSID) for the 2.4 GHz and 5 GHz bands, or leave it as it is.
- Type a new Wi-Fi password, then save the settings.
- Reconnect your devices with the new password.
Use a password of at least 12 characters with a mix of letters and numbers, and avoid reusing a password from another account.
Login Not Working?
I start with the connection itself, because that is where most login failures begin, and I work through the list in the order it is written.
If the login page will not open or the password is rejected, work through these fixes:
- Make sure your device is connected to the EA6350 network, not to mobile data or a different Wi-Fi network.
- Type the address exactly: http://192.168.1.1, with no extra letters or spaces. Try linksyssmartwifi.com if the IP address does not load.
- Try a different browser, or clear the browser cache and try again.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press the Reset button for at least 10 seconds. A factory reset restores the factory defaults — log back in with the password admin afterwards, then set a new password.
Key specs: The Linksys EA6350 is a WiFi 5 (AC1200+) dual-band router; this page covers the v2 and v3 hardware versions.
