D-Link COVR-2600R Login: Admin Setup Guide
The first time I set up a COVR-2600R, the login page would not take the…
The first time I set up a COVR-2600R, the login page would not take the password I typed, and leaving the password field empty felt like a mistake. I have since learned the router ships with a blank password, so the login asks for a username and nothing else.
This guide gives you the correct defaults for the COVR-2600R and the four steps that will get you into the admin panel.
Log in at 192.168.0.1 with the username Admin and leave the password field blank.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.0.1
Username: Admin
Password: (blank)
Login to Admin Panel →This button opens your router’s own login page. It works only when your device is connected to this router, by WiFi or cable.
D-Link COVR-2600R Default Login Details
I checked these defaults against the COVR-2600R setup flow before I wrote them down, so the table below matches the router you have in front of you.
These are the factory defaults for the COVR-2600R: after a reset the user name is Admin, the password is blank — leave the password field empty — and the LAN IP address is 192.168.0.1. Keep them somewhere safe once you have logged in, and change the admin password to something only you know.
| Detail | Value |
|---|---|
| Login IP | 192.168.0.1 |
| Username | Admin |
| Password | (blank) |
How to Log In to the D-Link COVR-2600R
I walk through this in the same order every time, because the order is what keeps a login from going wrong. If the login page will not take your password, the D-Link login guide covers the COVR setup flow too.
- Connect your computer or phone to the COVR-2600R with an Ethernet cable or over Wi-Fi.
- Open a browser and go to 192.168.0.1. You can also open dlinkrouter.local., which takes you to the same login page.
- Type Admin in the username field and leave the password field blank.
- Click Log In. The admin panel opens, and you can change the Wi-Fi name and password, update the firmware, and check who is connected.
Default Username and Password — All Variants
I have seen this catch owners out: the same model can ask for a fixed password on one firmware and leave the password blank on another, so check which case matches your router.
The COVR-2600R has one set of factory defaults. Some third-party sites list admin/admin, but that combination is disputed and is not the factory default for this model. If the login asks for a password you did not set, check the variant below before resetting the router.
| Version | Username | Password |
|---|---|---|
| Factory default | Admin | (blank — leave the password field empty) |
| After a password change | Admin | The factory default no longer works — use the password you set, or reset the router to restore it. |
Change WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because every device in the house connects with it.
Once you are logged in to the COVR-2600R admin panel, changing the Wi-Fi details takes about a minute.
- Log in at 192.168.0.1 with the admin password.
- Open the Wireless settings section of the admin panel.
- Change the network name (SSID) for the 2.4 GHz and 5 GHz bands, or leave it as it is.
- Type a new Wi-Fi password, then save the settings.
- Reconnect your devices with the new password.
Use a password of at least 12 characters with a mix of letters and numbers, and avoid reusing a password from another account.
Login Not Working?
I start with the connection itself, because that is where most login failures begin, and I work through the list in the order it is written.
If the login page will not open or the password is rejected, work through these fixes:
- Make sure your device is connected to the COVR-2600R network, not to mobile data or a different Wi-Fi network.
- Type the address exactly: http://192.168.0.1, with no extra letters or spaces. Try dlinkrouter.local. if the IP address does not load.
- Try a different browser, or clear the browser cache and try again.
- Check that Caps Lock is off, and type the username exactly as it is — Admin with a capital A. Passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the reset button for about 15 seconds. A factory reset restores the factory defaults — log back in with Admin and a blank password afterwards, then set a new password.
Key specs: The D-Link COVR-2600R is a WiFi 5 (AC2600) dual-band router and the router unit of the COVR-3902 kit.
