D-Link COVR C1200 Login: Admin Setup Guide
The first time I set up a COVR C1200, the login screen asked for nothing…
The first time I set up a COVR C1200, the login screen asked for nothing I recognised, and I was not sure I was on the right page. I have since learned the COVR asks for no username and a password you create yourself during setup.
This guide gives you the login IP and the four steps that will get you into the admin panel.
Log in at 192.168.0.1 with no username — the password is blank at first, and you create one in the setup wizard.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.0.1
Username: (none)
Password: (blank at factory state — create a password in the setup wizard)
Login to Admin Panel →This button opens your router’s own login page. It works only when your device is connected to this router, by WiFi or cable.
D-Link COVR C1200 Default Login Details
I checked these defaults against the COVR C1200 setup flow before I wrote them down, so the table below matches the router you have in front of you.
These are the factory defaults for the COVR C1200: the user name is none, the password is blank at factory state — the setup wizard asks you to create an admin password — and the login IP address is 192.168.0.1 after setup.
Keep the password somewhere safe once you have created it, and set it to something only you know.
| Detail | Value |
|---|---|
| Login IP | 192.168.0.1 |
| Username | (none) |
| Password | (blank at factory state — create a password in the setup wizard) |
How to Log In to the D-Link COVR C1200
I walk through this in the same order every time, because the order is what keeps a login from going wrong. If the login page will not take your password, the D-Link login guide covers the COVR setup flow too.
- Connect your computer or phone to the COVR C1200 with an Ethernet cable or over Wi-Fi.
- Open a browser and go to 192.168.0.1. You can also open covr.local., which takes you to the same login page.
- If you have already run the setup wizard, type the admin password you created during setup. If the Covr Point is still in its factory state, leave the password field blank.
- Click Log In. The admin panel opens, and you can change the Wi-Fi name and password, update the firmware, and check who is connected.
Default Username and Password — All Variants
I have seen this catch owners out: the factory password is blank, and the router only asks you to create one during setup, so check which case matches your router.
The COVR C1200 ships with no factory password of its own. Some aggregator sites list admin/admin, but that is generic filler and is not the factory default for this model. If you already ran the setup wizard, your own password is the only one that works.
| Version | Username | Password |
|---|---|---|
| Factory state (before setup) | (none) | (blank — leave the password field empty; the setup wizard asks you to create an admin password) |
| After the setup wizard | (none) | Use the admin password you created during the wizard. |
| After a password change | (none) | The password you set is the only one that works — or reset the Covr Point to restore the factory state. |
Change WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because every device in the house connects with it.
Once you are logged in to the COVR C1200 admin panel, changing the Wi-Fi details takes about a minute.
- Log in at 192.168.0.1 with the admin password you created during setup.
- Open the Wireless settings section of the admin panel.
- Change the network name (SSID) for the 2.4 GHz and 5 GHz bands, or leave it as it is.
- Type a new Wi-Fi password, then save the settings.
- Reconnect your devices with the new password.
Use a password of at least 12 characters with a mix of letters and numbers, and avoid reusing a password from another account.
Login Not Working?
I start with the connection itself, because that is where most login failures begin, and I work through the list in the order it is written. If the password was changed and forgotten, reset the router and set it up from scratch.
If the login page will not open or the password is rejected, work through these fixes:
- Make sure your device is connected to the COVR C1200 network, not to mobile data or a different Wi-Fi network.
- Type the address exactly: http://192.168.0.1, with no extra letters or spaces. Try covr.local. if the IP address does not load.
- Try a different browser, or clear the browser cache and try again.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the Covr Point: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the Covr Point to factory settings: press the Reset button on the bottom with an unfolded paper clip and hold it for about 10 seconds to restore the default settings.
A factory reset restores the factory state — the password is blank again, and the setup wizard asks you to create a new admin password.
Key specs: The D-Link COVR C1200 is a WiFi 5 (AC1200) mesh Covr Point, sold in the COVR-C1202 and COVR-C1203 packs.
