D-Link DIR-806A Login: Default IP & Password
D-Link DIR-806A Rev A1 Default Login and Password I know the feeling: the D-Link DIR-806A…
D-Link DIR-806A Rev A1 Default Login and Password
I know the feeling: the D-Link DIR-806A is online, the Wi-Fi works, but the admin page will not accept the password you are sure is right. I have been stuck on that screen myself, and the fix is usually a blank password from a different D-Link model, not this one. This router has its own default, and it is written in its own quick guide.
This guide gives you the DIR-806A login and the steps that get you in.
Log in to the D-Link DIR-806A Rev A1 at 192.168.0.1 with the username admin and the password admin. You can also open dlinkrouter.local, which takes you to the same login page.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.0.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.0.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.
How to Log in to the D-Link DIR-806A Rev A1
I walk through this in the same order every time, because the order keeps a login from going wrong. Connect to the router first, then open the login page.
- Connect your computer or phone to the DIR-806A with an Ethernet cable or over its Wi-Fi network.
- Open a browser and go to 192.168.0.1. You can also type dlinkrouter.local in the address bar.
- Type admin in the username field and admin in the password field.
- Click Log In. The admin panel opens, and you can change the Wi-Fi details or check connected devices.

D-Link DIR-806A Rev A1 Default Username and Password
I have seen this catch owners out: most D-Link routers use a blank password, but the DIR-806A Rev A1 does not. Its own quick guide says admin and admin, so try the top row first and do not use the blank-password advice from other D-Link models.
| Model | Username | Password | Login IP |
|---|---|---|---|
| DIR-806A Rev A1 | admin | admin | 192.168.0.1 |
| DIR-806 (different model) | Admin | (leave blank) | 192.168.0.1 |
If your unit is not the Rev A1, check the label on the bottom. The revision matters here, because the password changes with it.
Change D-Link DIR-806A WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because this router ships with its wireless network open. Once you are logged in, the change takes about a minute.
- Log in at 192.168.0.1 with your admin password.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
D-Link DIR-806A Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the DIR-806A network, not to mobile data or a different Wi-Fi network.
- If dlinkrouter.local opens the D-Link website instead of your router, use 192.168.0.1 directly.
- Try admin as the password, not a blank field. A blank password belongs to the DIR-806, not the Rev A1.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button on the back with a paperclip until the lights flash, then let go.
A reset erases every setting, and you will need to run the setup wizard again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
The D-Link DIR-806A Rev A1 is a Wireless AC750 multi-function router from 2014, with dual-band 802.11ac Wi-Fi, four Ethernet ports, and the default network names DIR-806A and DIR-806A-5G.










