Dynalink Router Login: Default IP & Password
I have helped with Dynalink logins for years, and the same thing trips people up…
I have helped with Dynalink logins for years, and the same thing trips people up every time. Dynalink is a modem-router brand from the ADSL days, so most of its routers share one login. Your router has its own address, and the login page stays shut until you use the right details.
This guide gives you the Dynalink login, the model table, and the steps that get you in.
Most Dynalink routers log in at 192.168.1.1 with the username admin and the password admin. The RTA020 is the odd one out, with admin and private.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.
How to Log in to a Dynalink Router
I walk through this in the same order every time, because the order keeps a login from going wrong. Check the model on the label of your own router before you type anything.
- Connect your computer or phone to the Dynalink router with an Ethernet cable or over Wi-Fi.
- Open a browser and go to 192.168.1.1. Type the address into the address bar, not the search bar.
- Type admin in the username field and admin in the password field. On an RTA020, type private as the password instead.
- Click Log In or OK. The admin panel opens, and you can change the Wi-Fi details or check connected devices.

Dynalink Default Username and Password
I have seen this catch owners out: Dynalink has one login that fits almost every model, and the RTA020 breaks the pattern. The table below lists every model I could verify, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| RTA1025W | admin | admin | 192.168.1.1 |
| RTA 100+ | admin | admin | 192.168.1.1 |
| RTA1046VW | admin | admin | 192.168.1.1 |
| RTA1320 / RTA1335 | admin | admin | 192.168.1.1 |
| RTA220 / RTA230 / RTA300 | admin | admin | 192.168.1.1 |
| RTA770W / RTL6100W | admin | admin | 192.168.1.1 |
| RTA020 | admin | private | 192.168.1.1 |
If your model is not in the table, start with admin and admin. That is the combination most Dynalink routers ship with, and private is the fallback to try next on older units.
Change Dynalink WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory password is the same on every unit. Once you are logged in, the change takes about a minute.
- Log in at 192.168.1.1 with your admin password.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
Dynalink Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the Dynalink network, not to mobile data or a different Wi-Fi network.
- Check that the ADSL cable is plugged into the ADSL port and the ADSL light is steady, not blinking.
- Try admin first, then private if your model is an RTA020. The Wi-Fi password and the admin password are not the same thing.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button for about 10 to 30 seconds with a paperclip, then let go.
A reset erases every setting, and it can also remove your ISP’s ADSL settings, so you may need your provider’s details to get back online. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Most Dynalink routers answer at 192.168.1.1 with admin and admin. The RTA020 is the only common model with a different password.










