192.168.85.1 Admin Login: Aerohive Admin & Password

Learn what 192.168.85.1 is, which Aerohive branch routers use it as a gateway, and how to reach the admin panel and fix the faults that keep owners out.

I typed 192.168.85.1 into my browser and got nothing back, and I spent longer than I want to admit checking cables before I learned the truth. This address only opens a login page when your router actually uses it, and most home routers do not. In this guide I show you which routers do use 192.168.85.1, the exact login details that work on them, and how I check in seconds whether this is your router’s address at all.

This guide covers what 192.168.85.1 is, which routers use it as their default gateway, how I log in to it, and what I do when the page will not load.

192.168.85.1 is the default gateway for the Aerohive BR100 and Aerohive BR200-LTE-VZ branch routers. Log in with username admin and password aerohive. If your router is a different brand, this address will not open its settings page.

The fastest way in: connect to the Aerohive router by cable or Wi-Fi, then tap the button below and sign in with the details in the box.

🔐 Aerohive BR100 / BR200-LTE-VZ Router Admin Login

IP Address: 192.168.85.1

Username: admin

Password: aerohive

Login to Admin Panel →

This button goes straight to http://192.168.85.1, your router’s own login page. It works only when your device is connected to that router, by Wi-Fi or cable. The login above applies to the Aerohive BR100 and BR200-LTE-VZ only — other brands use different addresses.

What Is 192.168.85.1?

192.168.85.1 is a private IP address, so it only works inside your own network and never on the public internet. It sits in the 192.168.85.0/24 range, which gives your router room for the devices on your network. I only see it as a gateway when a router has been set to use it.

Most home routers use a different gateway, such as 192.168.1.1, the address most brands ship with. If your network uses that range instead, that guide covers it. The address you need is always the one your own device reports as its gateway.

Which Routers Use 192.168.85.1?

I found this address tied to two Aerohive branch routers, the BR100 and the BR200-LTE-VZ. Both use it as their factory default gateway, and both share the same default login. I could not verify any other brand using it, so I would not assume it belongs to your router.

BrandModelDefault IPUsernamePassword
AerohiveBR100192.168.85.1adminaerohive
AerohiveBR200-LTE-VZ192.168.85.1adminaerohive

The Aerohive brand now belongs to Extreme Networks, and the Extreme community confirms the same default password for Aerohive access points. If your router is not one of these two models, do not try this login on it — it will not work, and repeated guesses can lock some routers out.

How to Log In to 192.168.85.1

I connect my laptop to the router first, by cable if I can, because a wired link will not drop me mid-change. Then I type the address into the browser and sign in with the Aerohive defaults.

  1. Connect your computer to the Aerohive router with an Ethernet cable or over its Wi-Fi network.
  2. Open a browser and type http://192.168.85.1 in the address bar, not the search bar, then press Enter.
  3. Type admin in the username field and aerohive in the password field, then click Log In.
  4. The admin panel opens, and you can change the Wi-Fi details or check connected devices.
  5. Change the admin password on your first login, so the factory password is not the only thing guarding your router.
Ethernet cable plugged into a laptop port with green lights wifirouterzone.com
A wired connection is the most reliable way to reach the login page.

How I Check If 192.168.85.1 Is My Router’s Address

I check my device’s Default Gateway before I blame the login page. The check takes under a minute, and it settles the question for good.

  1. On Windows, press Win + R, type cmd, press Enter, then type ipconfig and press Enter. Read the Default Gateway line under your Wi-Fi or Ethernet adapter.
  2. On a Mac, open System Settings, Network, Details, TCP/IP and read the Router field. That number is your gateway.
  3. On a phone, open your Wi-Fi network details and read the Router or Gateway field.

If the gateway is not 192.168.85.1, use the address your device reports. Our Router IP Finder walks you through the same check step by step.

Common Typos That Break the Login

A single wrong digit sends you to a different device or nowhere at all.

  • 192.168.85.l: the letter L instead of the digit 1. Browsers treat it as a search, not an address.
  • 192.168.851: a missing dot. This is not a valid address at all.
  • 192.168.85: an incomplete address, missing the last part. Browsers treat it as a search.
  • 192.168: an incomplete address, missing the last two parts. This is not a complete address.

Type the address exactly, with digits and dots only. If the page still will not load, the address is probably not your gateway.

192.168.85.1 Not Loading?

I start with the connection itself, because that is where most failures begin.

  • Make sure your device is connected to the Aerohive router’s own Wi-Fi or cable, not to mobile data or a different network.
  • Check the gateway on your own device. If it is not 192.168.85.1, your router uses a different address.
  • Try http:// first, then https://. Some devices answer on one and not the other.
  • If admin and aerohive are rejected, someone may have changed the password. Check the label on the router first.
  • Restart the router: unplug it, wait 30 seconds, and plug it back in.

If you forgot a changed password, press and hold the small reset button on the back of the router for about 10 seconds. This restores the factory login, but it also erases your Wi-Fi name and password, so set them up again afterwards.

Private vs Public IP Addresses

A private address works only inside your home network. Your router also has a public address, from your ISP, which websites see when you visit them.

The public address changes often, because ISPs hand addresses out as needed. The private address stays inside your house, and the same one exists in millions of homes.

That is why nobody can look up 192.168.85.1 on the internet. It means something different in every network, and only your own network can reach it.

If you want your public address instead, open our What Is My IP tool. The public address is the one the internet sees, and it is different from this private one.

Most readers landing here do not own an Aerohive BR100 or BR200-LTE-VZ. If the gateway check shows a different address, that number is your router, and this login was never meant for it.

192.168.85.1 problems users report, and what fixed them

Second-hand Aerohive AP cannot be configured in the web UI

An Extreme Networks community manager confirmed the AP130 web UI only allows firmware updates, not configuration. Use the CLI or a management platform. See Extreme Networks Community.

ERR_SSL_VERSION_OR_CIPHER_MISMATCH

An AP230 owner on old HiveOS got this error. Another user got in by removing the “s” from https in the address. See Extreme Networks Community.

Unknown login on an inherited AP

Extreme’s advice for an AP121 with unknown credentials was a factory reset so the default login works again. See Extreme Networks Community.

FAQs About 192.168.85.1

It is a private IP address used as the default gateway by the Aerohive BR100 and BR200-LTE-VZ routers. It opens those routers’ admin pages only when you are on their network.

On the Aerohive BR100 and BR200-LTE-VZ the factory default is username admin and password aerohive. These only apply to those two models, and only before anyone changes them.

Your router almost certainly uses a different gateway address. Check your device’s Default Gateway and use that number instead, and make sure you typed digits only, with no letter l.

No. 192.168.85.l contains a letter, so it is not a valid IP address and your browser treats it as a search. The correct address ends in the number 1.

No. Meraki MX devices use a different default setup, reaching their local status page through my.meraki.com or a 192.168.128.1 subnet, and they are managed through the Meraki Dashboard.

The team behind this guide
Grace Muller

Grace Muller found this topic
Content Strategist
Focus: Topic Planning & Coverage

James Carter

James Carter wrote this guide
Content Writer · Published November 21, 2026
Focus: Router Login & Setup

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts