192.168.62.1 Login: IP, Username and Password
Log in to 192.168.62.1 with admin and 1234. CNet, Tecom and AirVast routers, fixes and common typos.
The page opens only on a device connected to that router. Check the sticker on your router for its exact login. More defaults: Default Router Password List.
192.168.62.1 is a private IP address used by a handful of router and wireless device makers, including CNet, Tecom, AirVast, Unex, X-Micro and Procomp.
If your device lists it as the gateway, this guide shows how to log in, which defaults to try first and what to do when the page does not open.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to 192.168.62.1
Logging in takes less than a minute when your device is on the right network. Follow these steps in order:
- Connect your phone or computer to the router by WiFi or with an Ethernet cable. Mobile data will not reach 192.168.62.1.
- Open any browser and type http://192.168.62.1 in the address bar, not the search box.
- Enter the admin username and password. Try the defaults in the table below, or the ones printed on the router label.
- Once you are in, change the admin password and check that WiFi security is set to WPA2 or WPA3.
If the page never loads, your router probably uses a different address. Run our Router IP Finder or check the “Default Gateway” on your device before trying again.
Default username and password for 192.168.62.1
Defaults depend on the brand and model. These are the combinations most often reported for devices that use 192.168.62.1:
| Username | Password | Notes |
|---|---|---|
| admin | 1234 | Most reported default |
| 1234 | admin | Reversed on some units |
| admin | (blank) | Leave the password empty |
| (blank) | admin | Leave the username empty |
| admin | 1324 | Some older devices |
Most routers made in the last few years print a unique password on the label instead of a shared default. If none of these work and the password was changed, a factory reset brings back the label defaults.
Why your router uses 192.168.62.1
192.168.62.0/24 is a private subnet that a few manufacturers chose for their default network. It works like any other home network: the router takes .1 and hands out the rest.
These brands are less common today, so many devices on this address are older models. Expect simpler menus and older security settings.
Brands and devices that use 192.168.62.1
192.168.62.1 is not tied to one manufacturer. It is reported as the default or common gateway on these brands and ISP devices:
- CNet and Tecom routers
- AirVast and Unex wireless devices
- X-Micro and Procomp models
- iNexQ devices
Your exact model decides the address, so the label on the router or its manual is the final word.
How to check that your router really uses this IP
Before you troubleshoot the login page, confirm the gateway address on the device you are using:
- Windows: open Command Prompt, type
ipconfigand read the “Default Gateway” line. - Mac: open System Settings, Network, your connection, Details, then TCP/IP and read “Router”.
- Android: open WiFi settings, tap the connected network, and look for Gateway or Router.
- iPhone and iPad: Settings, Wi-Fi, tap the (i) next to your network, and read Router.
192.168.62.1 not working? Fixes that work
When the address times out or keeps refusing your password, work through these checks:
- Wrong network: make sure you are on the router WiFi, not mobile data, a guest network or a VPN.
- Wrong address: confirm the default gateway using the steps above. Many routers use 192.168.1.1 or 192.168.0.1 instead.
- Browser issues: type http:// in front, try a private window, or use another browser.
- Wrong password: check the label, then try the table above. Passwords are case sensitive.
- Router not responding: restart it, wait two minutes, and try again with a cable if you can.
- Locked out: hold the reset button for about 10 seconds to restore factory settings. This erases your WiFi name and password.
Still stuck? Our full guide on a router login page that will not open covers every cause.
Common typos of 192.168.62.1
A single wrong character sends you to a search page instead of your router. These are the mistakes people make most often when typing 192.168.62.1:
- 192.168.6.21 is not valid. Digits in the wrong place.
- 192.168.62.l is not valid. The final 1 typed as a letter.
- 192.168.26.1 is not valid. Digits swapped.
- 192.168.62,1 is not valid. A comma instead of a dot.
- 192.168.620.1 is not valid. Each part must be 255 or less.
Type the address exactly as 192.168.62.1 with dots, no spaces and no letters, then press Enter. Adding http:// in front stops the browser from treating it as a search.
Router or another device on 192.168.62.1?
Not every address that looks like a router address belongs to a router. Before you spend time on login pages, check what 192.168.62.1 actually is on your network.
- Find your default gateway (on Windows run
ipconfig; on a phone, open the WiFi network details). - If the gateway is 192.168.62.1, it’s your router and the login steps above apply.
- If the gateway is something else, 192.168.62.1 is probably a camera, printer, extender or another device.
- Check your router’s connected devices list to see which device holds it.
Our Router IP Finder shows your gateway address in one click.
First things to change after you log in
- Admin password: change it from the default or label password.
- WiFi security: WPA2-PSK (AES) or WPA2/WPA3 mixed.
- WiFi password: at least 12 characters, not reused anywhere.
- WPS: switch it off unless you need it.
- Remote management: off, unless you use it on purpose.
- Firmware: check for updates on the system or maintenance page.
