192.168.16.1 Login: Router and Extender Admin Page
Log in to 192.168.16.1 with admin and admin. LB-Link, B-Link routers and extenders, setup tips, fixes and typos.
The page opens only on a device connected to that router. Check the sticker on your router for its exact login. More defaults: Default Router Password List.
192.168.16.1 is a private IP address that some budget routers, travel routers and WiFi extenders use for their settings page. LB-Link and B-Link devices are the most common examples.
If your device shows 192.168.16.1 as its gateway, this is where you set the WiFi name, password and internet mode. Here is how to get in and what to do if it will not load.
The fastest way in: tap the login button in the box at the top of this page, then sign in with the details on your router label.
How to log in to 192.168.16.1
Logging in takes less than a minute when your device is on the right network. Follow these steps in order:
- Connect your phone or computer to the router by WiFi or with an Ethernet cable. Mobile data will not reach 192.168.16.1.
- Open any browser and type http://192.168.16.1 in the address bar, not the search box.
- Enter the admin username and password. Try the defaults in the table below, or the ones printed on the router label.
- Once you are in, change the admin password and check that WiFi security is set to WPA2 or WPA3.
If the page never loads, your router probably uses a different address. Run our Router IP Finder or check the “Default Gateway” on your device before trying again.
Default username and password for 192.168.16.1
Defaults depend on the brand and model. These are the combinations most often reported for devices that use 192.168.16.1:
| Username | Password | Notes |
|---|---|---|
| admin | admin | Most reported default |
| (blank) | admin | Leave the username empty |
| admin | (blank) | Leave the password empty |
| admin | password | Common alternative |
| admin | 1234 | Some extenders |
Most routers made in the last few years print a unique password on the label instead of a shared default. If none of these work and the password was changed, a factory reset brings back the label defaults.
Why your router uses 192.168.16.1
192.168.16.0/24 is a private subnet. Using .16 keeps these devices from clashing with a main router on 192.168.0.1 or 192.168.1.1, which matters for extenders and travel routers that connect to another network.
When an extender is joined to your main router, it may switch to an address from the main router, so 192.168.16.1 only works before setup or when you connect to the extender directly.
Brands and devices that use 192.168.16.1
192.168.16.1 is not tied to one manufacturer. It is reported as the default or common gateway on these brands and ISP devices:
- LB-Link and B-Link routers and extenders
- Edgeless and Redline devices
- Some Linksys setups
- Generic USB WiFi routers and travel routers
Your exact model decides the address, so the label on the router or its manual is the final word.
How to check that your router really uses this IP
Before you troubleshoot the login page, confirm the gateway address on the device you are using:
- Windows: open Command Prompt, type
ipconfigand read the “Default Gateway” line. - Mac: open System Settings, Network, your connection, Details, then TCP/IP and read “Router”.
- Android: open WiFi settings, tap the connected network, and look for Gateway or Router.
- iPhone and iPad: Settings, Wi-Fi, tap the (i) next to your network, and read Router.
192.168.16.1 not working? Fixes that work
When the address times out or keeps refusing your password, work through these checks:
- Wrong network: make sure you are on the router WiFi, not mobile data, a guest network or a VPN.
- Wrong address: confirm the default gateway using the steps above. Many routers use 192.168.1.1 or 192.168.0.1 instead.
- Browser issues: type http:// in front, try a private window, or use another browser.
- Wrong password: check the label, then try the table above. Passwords are case sensitive.
- Router not responding: restart it, wait two minutes, and try again with a cable if you can.
- Locked out: hold the reset button for about 10 seconds to restore factory settings. This erases your WiFi name and password.
Still stuck? Our full guide on a router login page that will not open covers every cause.
Common typos of 192.168.16.1
A single wrong character sends you to a search page instead of your router. These are the mistakes people make most often when typing 192.168.16.1:
- 192.168.l6.1 is not valid. A letter l in place of the 1 in 16.
- 192.168.1.6 is not valid. Digits in the wrong place.
- 192.168.16.l is not valid. The final 1 typed as a letter.
- 192.168.160.1 is not valid. An extra zero changes the subnet.
- 192.168.16,1 is not valid. A comma instead of a dot.
Type the address exactly as 192.168.16.1 with dots, no spaces and no letters, then press Enter. Adding http:// in front stops the browser from treating it as a search.
Frequently Asked Questions
What is 192.168.16.1?
It is a private IP address used as the admin page by some routers, travel routers and extenders, especially LB-Link and B-Link.
What is the default password for 192.168.16.1?
admin and admin is the most common. Some devices use admin as the password with no username.
Why does 192.168.16.1 not open after setting up my extender?
Once joined to your main router, the extender usually takes a new address. Find it in your main router device list.
Can I use 192.168.16.1 on my phone?
Yes. Connect your phone to the device WiFi, turn off mobile data, and open http://192.168.16.1 in the browser.
How do I reset a device that uses 192.168.16.1?
Hold the reset button for about 10 seconds with the power on. It returns to 192.168.16.1 and the default login.
