Zyxel NBG4604 Login: Default IP & Password
Log in to the Zyxel NBG4604 at 192.168.1.1 with admin and 1234, learn when to use the supervisor account, and fix the login faults that keep owners out.
I have logged in to plenty of Zyxel routers, and the NBG4604 has one quirk that wastes owners time. The login page shows the password already filled in on some versions, so owners click Login and get in, then never learn what the password is. Your gigabit router is online, the settings sit one login away, and the next visit asks for a password you never typed.
This guide gives you the NBG4604 login, the setup steps, and the fixes that get you in.
Log in to the Zyxel NBG4604 at 192.168.1.1 with admin as the username and 1234 as the password. The supervisor account, with full access, also uses supervisor and supervisor.
The fastest way in: tap the button below, then sign in with admin and 1234.
IP Address: 192.168.1.1
Username: admin
Password: 1234
WiFi Name (SSID): —
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.
How to Log in to the Zyxel NBG4604
The password is short, so type it slowly and check it before you click Login.
- Power the NBG4604 and wait for it to finish booting, then connect your computer by cable or join its Wi-Fi network.
- Open a browser and go to 192.168.1.1. Type the address into the address bar, not the search bar.
- Type admin as the username and 1234 as the password. On some versions the password is already filled in, so just click Login.
- Click Login. The admin panel opens, and the router asks you to change the password. Click Apply to set a new one, or Ignore to keep 1234.
- If this is the first setup, follow the connection wizard to set your internet connection and Wi-Fi details.

Zyxel NBG4604 Default Username and Password
I check the manual before I trust any login list, because Zyxel models share the 1234 password but not the username. The NBG4604 user guide lists two accounts, and the table below gives both.
| Model | Username | Password | Login IP |
|---|---|---|---|
| NBG4604 (admin) | admin | 1234 | 192.168.1.1 |
| NBG4604 (supervisor, full access) | supervisor | supervisor | 192.168.1.1 |
The admin account cannot open the Remote Management screens and can only view the system operation mode screen, while the supervisor account has full access to every setting. Both log in at 192.168.1.1. If you use another Zyxel router, our Zyxel router login guide covers the brand’s most common defaults.
Change Zyxel NBG4604 WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because 1234 is printed in every manual and anyone on the network can try it. Once you are logged in, the change takes about a minute.
- Log in at 192.168.1.1 with admin and 1234.
- Open Network, then Wireless LAN, in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2-PSK, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else.
Zyxel NBG4604 Login Not Working?
- Make sure your device is connected to the NBG4604 network, not to mobile data or a different Wi-Fi network.
- Type 192.168.1.1 exactly, with no extra letters or spaces. Try http://192.168.1.1 if the page will not load.
- Type 1234 exactly, in lowercase digits. The password is case-sensitive, and the admin password is 1234, not admin.
- If you failed to log out properly, wait five minutes before you try again. The router locks the session for that long.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: find the RESET button on the back, then press and hold it for more than five seconds. After the reset, the password is 1234 and the IP is 192.168.1.1 again.
Once you are in, change the admin password first, then set your Wi-Fi name and password, since both still use the factory defaults.
The NBG4604 is a Wireless N Gigabit managed router with one Ethernet WAN port, four Ethernet LAN ports, a WPS button, and wall mounting. It supports TR-069 remote management, so a service provider can manage it from a distance.
ZyXEL NBG4604 problems users report, and what fixed them
Cannot switch to Access Point mode
A ZyXEL community member could not change the operating mode. ZyXEL staff said to log in with the supervisor account, default password supervisor, unless the ISP changed it.
Saved settings will not load on a replacement
A user swapping in a spare NBG4604 found it rejected the old config file. The old unit ran firmware BWH.4 and the spare BWH.1, so update the spare first.
Forgot the password
The NBG4604 manual says hold RESET for more than 5 seconds to restore defaults, then log in with password 1234.










