Zyxel P-2601HN-F1 Login: Default Password

Log in to the Zyxel P-2601HN-F1 at 192.168.1.1 with admin and 1234, and fix the login faults owners hit most often if the page will not load.

I have logged in to plenty of Zyxel gateways, and the P-2601HN-F1 has one quirk that wastes owners time. Some login lists give a different IP address for this model, so owners type the wrong one and the page never loads. Your ADSL gateway is online, the settings sit one login away, and the wrong address looks exactly like a dead router.

This guide gives you the P-2601HN-F1 login, the setup steps, and the fixes that get you in.

Log in to the Zyxel P-2601HN-F1 at 192.168.1.1 with admin as the username and 1234 as the password. The ZyXEL user guide gives 192.168.1.1, not the 192.168.1.254 some login lists show.

The fastest way in: tap the button below, then sign in with admin and 1234.

🔐 Zyxel P-2601HN-F1 Admin Login

IP Address: 192.168.1.1

Username: admin

Password: 1234

WiFi Name (SSID): —

Login to Admin Panel →

This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.

How to Log in to the Zyxel P-2601HN-F1

Start with the manual’s address, since the lists disagree about this model.

  1. Power the P-2601HN-F1 and wait for it to finish booting, then connect your computer by cable or join its Wi-Fi network.
  2. Open a browser and go to 192.168.1.1. Type the address into the address bar, not the search bar.
  3. Type admin as the username and 1234 as the password, then click Login.
  4. The admin panel opens, and the router asks you to change the password. Click Apply to set a new one, or Ignore to keep 1234.
  5. If this is the first setup, follow the wizard to set your ADSL connection and Wi-Fi details.
Zyxel P-2601HN-F1 login laptop desk setup wifirouterzone.com
Join the router’s Wi-Fi first, then open the admin panel.

Zyxel P-2601HN-F1 Default Username and Password

I check the manual before I trust any login list, because the lists disagree on this model. The ZyXEL P 2601HN(L) F1 Series user guide gives the login details plainly, and the table below follows it.

ModelUsernamePasswordLogin IP
P-2601HN-F1admin1234192.168.1.1
P-2601HN-F1 (some login lists)— (blank)1234192.168.1.254

The official user guide lists 192.168.1.1 with admin and 1234, so I use that first. A few login lists give 192.168.1.254 with a blank username instead, so I keep it in the table as a fallback if the first address does not load.

The P-2601HNF1 spelling is the same model, not a second one. If you use another Zyxel router, our Zyxel router login guide covers the brand’s most common defaults.

Change Zyxel P-2601HN-F1 WiFi Password and Network Name

I change the Wi-Fi password first on every router I set up, because 1234 is printed in every manual and anyone on the network can try it. Once you are logged in, the change takes about a minute.

  1. Log in at 192.168.1.1 with admin and 1234.
  2. Open the wireless settings in the admin panel.
  3. Type your new network name (SSID) in the network name box and save it.
  4. Set the security to WPA2-PSK, then type a new Wi-Fi password.
  5. Save the settings, then reconnect your devices with the new password.

Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else.

Zyxel P-2601HN-F1 Login Not Working?

  • Make sure your device is connected to the P-2601HN-F1 network, not to mobile data or a different Wi-Fi network.
  • Type 192.168.1.1 exactly, with no extra letters or spaces. If it does not load, try 192.168.1.254, which some lists give for this model.
  • Type 1234 exactly. The password is case-sensitive, and the admin password is 1234, not admin.
  • Check that Caps Lock is off, and type the password exactly as it is.
  • Restart the router: unplug it, wait 30 seconds, and plug it back in.

If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: let it finish booting, then hold the reset button for about 10 seconds and let go. After the reset, the password is 1234 and the IP is 192.168.1.1 again.

Once you are in, change the admin password first, then set your Wi-Fi name and password, since both still use the factory defaults.

The P-2601HN-F1 is an ADSL2+ gateway with 802.11n wireless, from ZyXEL’s P 2601HN(L) F1 Series on firmware 3.10. It was sold mainly through ISPs, so your provider may have changed the defaults — check the label if admin and 1234 do not work.

ZyXEL P-2601HN-F1 problems users report, and what fixed them

Default login does not work

The P-2601HN(L)-F1 manual lists 192.168.1.1 with user admin and password 1234. ISPs often change this, so if it fails, reset the router or ask your provider.

Phone port has no dial tone

ZyXEL’s troubleshooting chapter says to check the VoIP status on the Status screen, then power cycle the router. No registration there usually means wrong SIP details from the provider.

WiFi slower than expected

This model is single-band 802.11n rated up to 150 Mbps. Real WiFi speeds will be well under that, so use a cable for anything speed-sensitive.

FAQs About Zyxel P-2601HN-F1 Login

The default password is 1234, and the default username is admin. Type both at 192.168.1.1. I change this password right after the first login, because it is printed in every manual.

The default IP is 192.168.1.1, per the ZyXEL user guide. Some login lists give 192.168.1.254 instead, so I try that second if 192.168.1.1 does not load.

Yes. P-2601HNF1 is the same model written without the hyphens, and it uses the same login: 192.168.1.1 with admin and 1234. I treat them as one page, not two.

Log in at 192.168.1.1, open the wireless settings, type a new network name and password, and save.

Let the router finish booting, then hold the reset button for about 10 seconds and let go. After the reset, the password is 1234 and the IP address is 192.168.1.1 again.

The team behind this guide
Kevin Doyle

Kevin Doyle found this topic
SEO Research Lead
Focus: Topic & Keyword Research

Lucas Meyer

Lucas Meyer wrote this guide
Content Writer · Published November 20, 2026
Focus: Router Security

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts