CradlePoint MBR900 Login: Default Password
Open the CradlePoint MBR900 admin panel for your mobile broadband setup, find the login details on its label, and fix the faults that keep owners out.
CradlePoint MBR900 Default Login and Password
I know the scene: the CradlePoint MBR900 is online, the modem light is on, but the admin page will not take the password you are sure is right. I have been stuck on that screen myself, and the fix is usually the password, not the router. The MBR900 is a mobile broadband router, so its login lives at 192.168.0.1, and this guide gives you the correct default, the login steps, and the reset fix that works when nothing else does.
This guide gives you the MBR900 login, the setup wizard steps, and the fixes that get you in.
Log in to the CradlePoint MBR900 at 192.168.0.1. There is no username to type — leave the username field blank and enter the last six digits of the MAC address on the label on the bottom of the router as the password.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.0.1
Username: — (blank)
Password: last 6 digits of the MAC address on the label
SSID: — (set during setup)
Login to Admin Panel →This button opens our 192.168.0.1 login guide, which takes you to the router itself. It works only when your device is connected to this router, by WiFi or cable. Read the six digits off the label on the bottom of your MBR900 before you start.
CradlePoint MBR900 Default Login Details
I checked these defaults against the MBR900 quick start guide and user manual before I wrote them down, so the table below matches the router you have in front of you.
The MBR900 is a 3G/4G mobile broadband router, so it answers at 192.168.0.1 on most builds. Keep the label password somewhere safe once you have logged in, and change the admin password to something only you know.
| Detail | Value |
|---|---|
| Login IP | 192.168.0.1 |
| Username | — (blank) |
| Password | last 6 digits of the MAC address on the label |
| SSID | — (set during setup) |
| Management page | http://192.168.0.1 |
How to Log In to the CradlePoint MBR900
If 192.168.0.1 does not open the login page, our Router IP Finder walks you through finding the right address for your network.
- Connect your computer or phone to the MBR900 with an Ethernet cable or over Wi-Fi. I use a cable for the first login, because a weak Wi-Fi signal can cut the page off halfway.
- Open a browser and go to 192.168.0.1. A default CradlePoint page appears and asks for a password.
- Leave the username field blank, if one appears, and type the last six digits of the MAC address from the label on the bottom of the router as the password.
- Click OK or Log In. The admin page opens, and the setup wizard can walk you through the rest of the setup.

Default Username and Password — All Variants
I have seen this catch owners out: the same router can ask for a different password on another build, so check which case matches your MBR900.
The MBR900 most often uses a blank username with the last six digits of the MAC address as the password. Try the other case below before you reset anything:
| Version | Username | Password |
|---|---|---|
| Most common (manual) | (blank) | last 6 digits of the MAC address |
| Some password lists | admin | last 8 characters of the MAC address |
The manual is the authority here: the quick start guide says the password is the last six digits of the MAC address on the label, and the admin page asks for a password only. If admin with eight characters works on your unit, it is a later firmware build — the label digits are still the place to look first.
Change CradlePoint MBR900 WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory settings are the same on every unit that leaves the shop.
Once you are logged in to the MBR900 admin page, changing the Wi-Fi details takes about a minute:
- Log in at 192.168.0.1 with the label password.
- Click the BASIC tab, then SETUP WIZARD, then NEXT, and follow the wizard to the wireless settings.
- Choose a security password for your Wi-Fi network and type it in — this is the password your devices will use to connect.
- Save the settings and let the router restart, then reconnect your devices with the new password.
Wi-Fi security is separate from the admin login page, so changing one does not change the other. Use a password of at least 12 characters with a mix of letters and numbers, and avoid reusing a password you use anywhere else.
CradlePoint MBR900 Login Not Working?
If the login page will not open or the password is rejected, work through these fixes:
- Make sure your device is connected to the MBR900 network, not to mobile data or a different Wi-Fi network.
- Type the address exactly: 192.168.0.1, with no extra letters or spaces.
- Read the MAC address off the label on the bottom of the router, not off the box — the box label and the router label can differ.
- Try the last six digits first, then the last eight characters, since some password lists quote eight.
- The last six characters can include the letters A to F, so type them exactly as printed on the label.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the small reset button on the back with a paper clip for about 10 seconds, then let the router restart and log in again with the label password.
The MBR900 works with USB, ExpressCard, or PC Card mobile broadband modems, and it can also plug straight into a cable or DSL modem. I sort the login and the Wi-Fi password first, and only then plug the modem in and check the supported device list.
Key specs: The CradlePoint MBR900 is a 3G/4G mobile broadband N router with 802.11n Wi-Fi, four LAN ports, one WAN port, USB modem support, Wi-Fi Protected Setup, and a web admin page at 192.168.0.1.
Cradlepoint MBR900 problems users report, and what fixed them
WiFi network vanished after a reset
An RV owner on the Good Sam forum could not see the MBR900 network even after a factory reset and setup wizard. With the last firmware already installed, the conclusion was a hardware failure.
Plugged-in USB modem is not recognized
Verizon community members with older Cradlepoint MBR routers found USB modems blinking ready but not detected. Check the modem is on Cradlepoint’s supported list for your firmware.
No internet with a strong signal
The Cradlepoint manual says the modem needs an active data plan and must be activated in the router admin pages before it connects.










