AIS Fibre Router Login: Default IP & Password
Open your AIS Fibre router admin page, match the login details to your model — FiberHome, ZTE or Huawei — and fix the faults that keep owners out.
I needed to change my AIS Fibre Wi-Fi password, and I hit the same wall most AIS customers hit. There is no single login that works on every AIS router, because AIS ships different routers from different makers. I spent an afternoon checking AIS’s help pages and the labels on the models, and I found the one login AIS itself documents. This guide gives you that login, the right address for your model, and the steps to get in.
This guide covers the AIS Fibre router login: the AIS-documented default for the standard home unit, the login address for each common AIS model, the exact login steps, how to change your Wi-Fi password, and what to do when the login fails or you forgot the password.
Open http://192.168.1.1 in your browser. On the standard AIS home unit (FiberHome HG180), log in with username admin and password aisadmin. Other AIS models use different logins, so check the sticker on your router first.
The fastest way in: connect to your AIS Wi-Fi or plug in a cable, open 192.168.1.1, and try admin / aisadmin first — then the login printed on your router’s label.
IP Address: 192.168.1.1
Username: admin
Password: aisadmin
This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by Wi-Fi or cable. This login is for the standard AIS home unit (FiberHome HG180) — other AIS models use the login printed on their own label.
How to Log in to an AIS Fibre Router
Check the sticker on the bottom or back of your own router before you type anything.
- Connect your phone or laptop to the AIS router — join its Wi-Fi (look for AIS_Fibre_XXXX) or plug a network cable into a LAN port. Mobile data will not work.
- Open any browser and type http://192.168.1.1 in the address bar, not the search bar. Press Enter.
- If the page does not load, try http://192.168.100.1 — some Huawei AIS units use that address instead.
- Type the username and password from the sticker on the bottom or back of your router. On the FiberHome HG180, use admin and aisadmin.
- Click Login. If the page is in Thai, look for the English flag or a Language menu to switch it.

AIS Fibre Default Username and Password
I have seen this catch owners out: login sites list admin and admin for AIS, but AIS never published one login for every model. The table below lists every common AIS model I could check, with the login AIS itself documents first and the label login for the rest.
| Model | Username | Password | Login IP |
|---|---|---|---|
| FiberHome HG180 (AIS Fibre Home, standard unit) | admin | aisadmin | 192.168.1.1 |
| ZTE ZXHN F670L (common in Bangkok condos) | On the device label | On the device label | 192.168.1.1 |
| Huawei HG8145V5 / EG8145V5 (fibre ONT) | On the device label | On the device label | 192.168.1.1 or 192.168.100.1 |
| D-Link DIR-825 (AIS-branded) | On the device label | On the device label | 192.168.1.1 |
| ZTE ZXHN F460 (older AIS installations) | On the device label | On the device label | 192.168.1.1 |
The HG180 login is the only one AIS itself publishes, in its own support pages and the HG180 installation guide. For the other models, no ZTE, Huawei, D-Link or AIS help page publishes a password, so the sticker on your router is the honest answer — and login sites that print admin and admin for them are guessing.
Huawei fibre ONTs in general often open at 192.168.100.1, and generic Huawei accounts like root and admin exist on some carrier builds. Those are not AIS-verified logins, so I do not present them as AIS defaults — use the label on your own unit.
Change AIS Fibre WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory key is printed in the manual for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at 192.168.1.1 with the login from the table above or your router’s label.
- Open the Wireless, Wi-Fi or WLAN menu. On the HG180 this sits under the wireless settings page.
- Change the Network Name (SSID) if you want a new Wi-Fi name. Do the 2.4 GHz and 5 GHz bands separately if your router shows both.
- Type your new Wi-Fi password in the password or Pre-Shared Key field. Use at least 12 characters with letters and numbers.
- Click Save or Apply. Your devices will disconnect — reconnect them with the new password.
If the page is in Thai, switch it to English first, so you do not save the wrong field by mistake.
AIS Fibre Login Not Working?
- Make sure you are on the AIS Wi-Fi or a LAN cable, not mobile data. Type http://192.168.1.1 in the address bar, not the search bar.
- If 192.168.1.1 fails, try 192.168.100.1 (Huawei units) or check the gateway on your router’s sticker.
- If the login is rejected, the password may have been changed during installation. Check for an extra sticker the installer may have added, then try the label login.
- If the page shows Thai, look for the English flag icon or a Language menu and switch to English.
- No internet after login: check the fibre cable is in the WAN port and the power light is solid green or blue. Unplug the router for 30 seconds, plug it back in, and wait 2 to 3 minutes.
- If settings will not save, use a cable instead of Wi-Fi while you change settings, then try again.
If you changed the password and forgot it, reset the router to factory settings. Find the small reset pinhole on the back or bottom of the router. With the power on, press and hold it with a paper clip for about 10 seconds until the lights flash, then wait for the router to restart.
On the HG180 the login returns to admin / aisadmin. A reset wipes your Wi-Fi name and password too, so you will need to set them up again — and on fibre lines you may need your AIS account details for the setup wizard.
I found one login AIS itself documents, and for every other AIS model the label on your router is the honest answer. Start with 192.168.1.1 and admin / aisadmin, check the sticker if that fails, and change the admin password once you are in so nobody else can walk into your settings.
AIS problems users report, and what fixed them
admin and admin do not work on my AIS Fibre box
AIS supplies Huawei, ZTE and FiberHome ONTs, and each one can use a different password. Check the sticker on the bottom of the box before resetting.
192.168.1.1 does not open
Some AIS-supplied Huawei routers use 192.168.8.1. Check the Default Gateway in your network settings to see which one your box uses.
I logged in but some settings are hidden
The user account on ISP ONTs only shows WiFi name, password and basic status. Call AIS for changes like bridge mode.










