Araknis Networks Router Login: IP & Password
Araknis routers answer at 192.168.1.1 with araknis as both username and password — not admin. Model table, login steps, OvrC tips and reset help inside.
I have set up Araknis routers for custom-install jobs, and the same thing trips owners up every time. The login is not the admin and admin pair most password lists print, and the address is not the one the access points use either. Your network is online, and the right login is printed in the Araknis quick start guides.
This guide gives you the Araknis router login, the model table, and the steps that get you in.
Araknis Networks routers log in at 192.168.1.1 with the username araknis and the password araknis. That pair comes from Araknis’s own quick start guides for the AN-110, AN-220 and AN-310 routers, and it works on the local web interface and through OvrC WebConnect.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: araknis
Password: araknis
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. If your Araknis box is an access point, not a router, use 192.168.20.253 instead — see the table below.
How to Log in to a Araknis Networks Router
Check the model on the label of your own Araknis box before you type anything.
- Connect your computer to the Araknis router with an Ethernet cable or over its Wi-Fi network.
- Set your computer to get its address automatically, or give it a static address like 192.168.1.10 with the mask 255.255.255.0.
- Open a browser and go to 192.168.1.1. Type the address into the address bar, not the search bar.
- Type araknis in the username field and araknis in the password field, then click Login.
- On first login the router asks you to change the password. Pick a strong new one and save it before you go further.
Once you are in, claim the router in OvrC and use WebConnect to reach the same login page from anywhere. I do this on every install, because it turns the next login into a single click instead of a trip to the rack.

Araknis Default Username and Password
I have seen this catch owners out: several login lists repeat admin and admin for Araknis, but every Araknis quick start guide I checked prints araknis and araknis instead. The table below lists every router I could verify from the guides, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| AN-110-RT-2L1W | araknis | araknis | 192.168.1.1 |
| AN-110-RT-2L1W-WIFI | araknis | araknis | 192.168.1.1 |
| AN-220-RT | araknis | araknis | 192.168.1.1 |
| AN-300-RT-4L2W | araknis | araknis | 192.168.1.1 |
| AN-310-RT-4L2W | araknis | araknis | 192.168.1.1 |
| AN-300-AP-I-N (access point, not a router) | araknis | araknis | 192.168.20.253 |
If your model is not in the table, start with araknis and araknis at 192.168.1.1. That is the pair the AN-110 and AN-310 quick start guides print, and it is the pair most Araknis routers ship with. The label on the bottom of the router is the final word if the pair fails.
The admin/admin pair shows up on many password lists for Araknis, and I have never seen it work on an Araknis router. Araknis prints araknis and araknis in its own guides, so I use the guide pair first and treat admin/admin as a commonly repeated mistake.
Change Araknis Networks WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory password is printed in the guide for anyone to read. On most Araknis installs the Wi-Fi lives on the access points, so I change it there or in OvrC.
- Log in at 192.168.1.1 with araknis and araknis.
- Open the wireless settings in the admin panel, or open the access point settings in OvrC.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
On the AN-110-RT-2L1W-WIFI the wireless settings sit in the router itself, so the steps above work as written. On a router-only Araknis install, the SSID lives on the access points, and OvrC pushes the change to all of them at once.
The admin password and the Wi-Fi password are separate on Araknis, so changing one does not change the other.
Araknis Networks Login Not Working?
- Make sure your device is connected to the Araknis network, not to mobile data or a different Wi-Fi network.
- Check that the WAN cable is plugged into the port labelled WAN, and that you are on a LAN port or the Araknis Wi-Fi.
- Try araknis and araknis first. Admin and admin does not work on Araknis routers, even though many lists print it.
- Try the right address for your box. Routers use 192.168.1.1, but Araknis access points answer at 192.168.20.253.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press the RESET button on the back of the router and hold it for 10 to 15 seconds until the status LEDs flash once, then let go. The AN-220-RT resets its login after a 10 to 19 second hold instead.
A reset erases every setting, and the router will ask you to set it up again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Araknis is the brand where the username matters most. Type araknis, type araknis, and the admin page opens at 192.168.1.1 — admin was never the answer here. Claim the router in OvrC once you are in, and the next login takes seconds from anywhere.










