192.168.99.1: What It Is & How to Find It
Learn what 192.168.99.1 is, which devices answer on it, how to check if it is your gateway, and how to open login or hotspot page when it will not load.
I have seen 192.168.99.1 confuse owners more than most addresses, because it sits in two worlds at once. On most home networks it is just a device address, handed out by DHCP. On a small set of routers it is the gateway itself, and typing it into a browser opens the admin page. Which one it is depends on the router in front of you, and this guide shows you how to tell.
This guide explains what 192.168.99.1 is, which routers use it as a gateway, and how to find the device behind it.
192.168.99.1 is a private address in the 192.168.99.0/24 network. It is the default gateway on Lenovo Newifi 3 and 3D2 routers and the Enable Networks CR3000 — on those, log in with that router’s own credentials. On any other network it is usually just a device address with no login of its own.
Routers that use 192.168.99.1
I keep this table short on purpose, because only a small set of routers ships with this address as its gateway. Find yours here, and use its row — not a generic login from a password list.
| Router | Username | Password | Notes |
|---|---|---|---|
| Lenovo Newifi 3 | admin | admin | default gateway out of the box |
| Lenovo Newifi 3D2 | admin | admin | upgraded Newifi 3, same gateway |
| Enable Networks CR3000 | on the label | on the label | check the label on the unit |
| Innomedia MTA 6328-1Be2s | Admin | password | SIP device, LAN side factory set to 192.168.99.1 |
The Lenovo Newifi and Enable CR3000 gateway claims come from a router-IP aggregator, not from Lenovo or Enable’s own manuals, and the Innomedia claim comes from a forum thread quoting the device manual. Each row above is what those sources report — and the label on your own unit is still the final word.
If your router is none of these, 192.168.99.1 is probably not your gateway at all. A previous owner may have changed the router’s LAN address to it, or your ISP may have pre-configured it. Either way, the credentials on the label of your own router are the ones that work.
How to log in at 192.168.99.1
These steps only apply if 192.168.99.1 is your router’s gateway — on a Lenovo Newifi, an Enable CR3000, or an Innomedia MTA. If it is not, skip to the section below on finding the device instead.
- Connect your computer to the router with an Ethernet cable or over its Wi-Fi network.
- Open a browser and type http://192.168.99.1 in the address bar, then press Enter.
- Type the username and password for your model from the table above — or from the label on your own unit — then click Login.
- The admin page opens, and you can change the Wi-Fi details or check connected devices.
If the page will not load, check that 192.168.99.1 is really your gateway with our Router IP Finder. A wrong gateway address looks like a dead network, but it is only a wrong number. I check the gateway first when a login page will not load.
What 192.168.99.1 is
A private address works only inside your local network, and it is how devices on that network talk to each other. Your laptop uses one to reach your printer, and it only works inside your network. I treat any 192.168.99.x address as a device address until I prove otherwise.
The 192.168.99.0/24 network holds 254 usable addresses, from 192.168.99.1 to 192.168.99.254. Network admins sometimes pick this range on purpose, because it is far less crowded than 192.168.1.x or 192.168.0.x and it rarely clashes with a VPN tunnel or a neighbour’s network.

Nobody on the internet can reach it, and the same number exists in thousands of homes and offices. Outside the models in the table above, no major router brand uses 192.168.99.1 as a gateway address.
How to find which device has 192.168.99.1
- Log in to your router at its gateway address and open the connected devices or DHCP client list. Find 192.168.99.1 and read the device name next to it.
- On Windows, run
arp -ain Command Prompt. Match 192.168.99.1 to its MAC address, then match that MAC address in the router list. - On a Mac or phone, open your Wi-Fi network details to see your own address. It is only 192.168.99.1 if that device holds it.
If you want your public address instead, open our What Is My IP tool.
When typing 192.168.99.1 does something
Typing 192.168.99.1 into a browser sometimes opens a page, and sometimes opens nothing at all. It depends on which device holds the address right now.
- Printers: many show a status page with ink levels and print jobs.
- Security cameras: some show a live view or a settings page.
- Smart TVs and media players: some answer with a control page or a setup screen.
I check the device list before I type an address into a browser. Knowing which device holds it tells me what page to expect.
192.168.99.1 login: what to try instead
I see this mistake often: owners treat every 192.168.x address as a router login. Only the gateway address opens the admin page, and on most home networks that is 192.168.1.1 or 192.168.0.1 — not 192.168.99.1.
- Find your gateway address on your device. On Windows, run ipconfig and read the Default Gateway line.
- Type that gateway address into the browser address bar, not the search box.
- Sign in with the username and password on your router label. Those are the only credentials that work.
If the password was changed and forgotten, reset the router to factory settings and log in again with the label credentials. A reset erases every setting, so use it only when the label login no longer works.
Private vs public IP addresses
A private address works only inside your home network. Your router also has a public address, from your ISP, which websites see when you visit them.
The public address changes often, because ISPs hand addresses out as needed. The private address stays inside your house, and the same one exists in thousands of homes.
That is why nobody can look up 192.168.99.1 on the internet. It means something different in every house, and only your own network can reach it.
Common mistakes and typos
A single wrong digit sends you to a different device or nowhere at all.
- 192.168.99.1.1: an extra .1 at the end — the competitor’s own pages make this mistake.
- 192.168.9.1: a missing 9, which is a different network entirely.
- 192.168.99.11: an extra digit at the end, which is a different address.
- 192.168.99.1 with spaces: a space after a dot breaks the address.
- 192.168.99.1 vs 192.168.1.1: the two are different networks, and only one of them is your gateway.
Type the address exactly, with dots and no spaces. If the page still will not load, the address is probably not your router.
192.168.99.1 problems users report, and what fixed them
Address changed after adding a second router
Huawei documents that a cascaded secondary router moves its LAN IP automatically (for example to 192.168.4.1). Check the main router’s client list for the new address. See Huawei support.
Proxy setting stops local pages
A Buffalo owner with internet working could not open the router page; a reply pointed to a browser proxy. Turn proxies off for local addresses. See Tom’s Hardware thread.
Hard reset brought the page back
A Netgear modem owner who could ping the admin address but get no page fixed it with a 7 second reset press. Note this clears your settings. See Netgear Community thread.
Ping replies but no login page
Several TP-Link community members could ping the router and still got no page, even after flushing DNS. Power cycling the router and trying another browser were the steps that helped most. See TP-Link community thread.










