Arris TG1672G V6 Login: Default Password
Arris TG1672G V6 Default Login and Password I know the feeling: the Arris TG1672G v6…
Arris TG1672G V6 Default Login and Password
I know the feeling: the Arris TG1672G v6 is online, the Wi-Fi works, but the admin page will not accept the password you are sure is right. I have been stuck on that screen myself, and the fix is usually the address, not the password. This gateway answers on two addresses, and only one of them opens the login page.
This guide gives you the TG1672G v6 login, the Xfinity address, and the reset that works.
Log in to the Arris TG1672G v6 at 192.168.0.1 with the username admin and the password password. Xfinity-supplied units use 10.0.0.1 instead, with the same login.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.0.1
Username: admin
Password: password
Login to Admin Panel →This button opens our 192.168.0.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. If your unit came from Xfinity, use 10.0.0.1 instead.
How to Log in to the Arris TG1672G V6
I walk through this in the same order every time, because the order keeps a login from going wrong. Connect to the gateway first, then open the login page.
- Connect your computer or phone to the TG1672G v6 with an Ethernet cable or over its Wi-Fi network.
- Open a browser and go to 192.168.0.1. Type the address into the address bar, not the search bar.
- Type admin in the username field and password in the password field.
- Click Apply or Log In. The System Basic Setup screen opens, and you can change the Wi-Fi details or check connected devices.
- If the page asks you to change the password on first login, set a new one and write it down before you save it.

Arris TG1672G V6 Default Username and Password
I have seen this catch owners out: login sites list 192.168.100.1 for the TG1672G, and that address opens the modem status page, not the login. The table below lists the combinations I could verify, so try the top row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| TG1672G v6 (Touchstone gateway) | admin | password | 192.168.0.1 |
| TG1672G v6 (Xfinity-supplied) | admin | password | 10.0.0.1 |
| TG1672G (modem status page) | admin | password | 192.168.100.1 |
Some cable ISPs set their own password on this gateway, so check the label on your unit if admin and password fail. The Wi-Fi name and password are printed on the security label too, and they are not the same as the admin login.
Change Arris TG1672G V6 WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory key is printed on the label for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at 192.168.0.1 with your admin password.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
Arris TG1672G V6 Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the TG1672G network, not to mobile data or a different Wi-Fi network.
- If 192.168.0.1 does not load, try 192.168.100.1 to check the modem status, then try 10.0.0.1 if your unit came from Xfinity.
- Try password as the password, not admin. The Wi-Fi password on the label and the admin password are not the same thing.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the gateway: unplug it, wait 30 seconds, and plug it back in.
- If the Online light never turns solid, the cable line is down. Call your ISP before you change any settings.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button on the back for about 10 seconds with a paperclip, then let go.
A reset erases every setting, and you will need to set the gateway up again. If the login page will not open at all, check that you are using the right gateway address first.
Arris TG1672G V6 Key Specs
The TG1672G v6 is a Touchstone Telephony Gateway with DOCSIS 3.0, dual-band concurrent Wi-Fi, and MoCA. It carries two phone lines and four Gigabit Ethernet ports, and it takes a battery for phone service during a power cut.
The same hardware is sold as the TG1672G and the TG1672G72, and the login is the same on both. Our Arris router login guide covers the rest of the Touchstone range.










