Ubee DDW3600 Login: Default IP & Password
I have worked with Ubee cable gateways, and the same thing trips owners up every…
I have worked with Ubee cable gateways, and the same thing trips owners up every time. The brand uses user as the username, not admin, so the login page rejects the first guess. Your gateway is online, the settings sit one login away, and the page gives no clue what it wants.
This guide gives you the DDW3600 login, the model table, and the steps that get you in.
Log in to the Ubee DDW3600 at 192.168.0.1 with the username user and the password admin. If that fails, try user and user, or the password printed on the label.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.0.1
Username: user
Password: admin
Login to Admin Panel →This button opens our 192.168.0.1 login guide, which takes you to the gateway itself. It works only when your device is connected to that gateway, by WiFi or cable. The cable modem status page is at 192.168.100.1.
How to Log in to the Ubee DDW3600
I walk through this in the same order every time, because the order keeps a login from going wrong. Check the label on the bottom of your own gateway before you type anything.
- Connect your computer to the DDW3600 with an Ethernet cable or over its Wi-Fi network.
- Open a browser and go to 192.168.0.1. Type the address into the address bar, not the search bar.
- Type user in the username field and admin in the password field, then click Log In or OK.
- If that fails, try user and user, or the password printed on the label under GUI password.
- The admin panel opens, and you can change the Wi-Fi details or check connected devices.

Ubee DDW3600 Default Username and Password
I have seen this catch owners out: Ubee is a cable-modem brand, so its logins change with the provider and the model year. The table below lists every model I could verify, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| DDW3600 | user | admin | 192.168.0.1 |
| DDW3611 | user | user | 192.168.0.1 |
| DDW365 | user | user | 192.168.0.1 |
| DDW36C | admin | (printed on the label) | 192.168.100.1 |
| DVW32CB | admin | (printed on the label) | 192.168.100.1 |
If your model is not in the table, start with user and user at 192.168.0.1. That is the login most Ubee gateways ship with, and Ziggo versions use ziggo and draadloos instead.
Change Ubee DDW3600 WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory key is printed on the label for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at 192.168.0.1 with your admin password.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
Ubee DDW3600 Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the DDW3600 network, not to mobile data or a different Wi-Fi network.
- Check that the coaxial cable is screwed in tight and the cable light is steady, not blinking.
- Try user and admin first, then user and user. The Wi-Fi password and the admin password are not the same thing.
- Try 192.168.100.1 if 192.168.0.1 will not load. In bridge mode, only the status page at 192.168.100.1 works.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the gateway: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button for about 10 seconds with a paperclip, then let go.
A reset erases every setting, and you will need your provider’s details to set the gateway up again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
The DDW3600 is a DOCSIS 3.0 cable modem gateway with 8 downstream and 4 upstream channels, 802.11n wireless, and four Ethernet ports. It was shipped by cable providers in the Time Warner and Spectrum era.










