GL.iNet GL-MT300N-V2 Login: IP & Password
I have travelled with the GL.iNet GL-MT300N-V2 Mango, and the same thing trips owners up…
I have travelled with the GL.iNet GL-MT300N-V2 Mango, and the same thing trips owners up every time. The login page asks for a password, but the router never had one, so owners type admin and get stuck. Your travel router is online, the settings sit one login away, and the page gives no clue what it wants.
This guide gives you the Mango login, the setup steps, and the fixes that get you in.
The GL.iNet GL-MT300N-V2 (Mango) has no default admin password. Log in at 192.168.8.1 and create your admin password on the first visit — goodlife is the old WiFi key, not the admin password.
The fastest way in: tap the button below, then sign in with the password you created at setup.
IP Address: 192.168.8.1
Username: — (no username)
Password: Created during setup
WiFi Name (SSID): GL-MT300N-V2-XXX
Login to Admin Panel →This button opens our 192.168.8.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.
How to Log in to the GL.iNet GL-MT300N-V2
I walk through this in the same order every time, because the order keeps a login from going wrong. First-time setup asks you to create the password, so start there if the router is new.
- Power the Mango from a USB port or power bank and wait for it to finish booting.
- Join its Wi-Fi network, called GL-MT300N-V2-XXX, with the key printed on the label. Older units use goodlife.
- Open a browser and go to 192.168.8.1. Type the address into the address bar, not the search bar.
- Choose your language, then create an admin password and click Apply.
- The admin panel opens, and you can set up the internet connection or change the Wi-Fi details.
GL.iNet’s own first-time setup video walks through the same steps. It uses a newer model as its example, but the flow is the same on the Mango.

GL.iNet GL-MT300N-V2 Default Username and Password
I have seen this catch owners out: login sites list admin and admin for the Mango, and that is wrong. GL.iNet’s own docs say the first visit asks you to set a password, so use the table below and create yours.
| Model | Username | Password | Login IP |
|---|---|---|---|
| GL-MT300N-V2 (standard firmware) | — (none) | Created during setup | 192.168.8.1 |
| GL-MT300N-V2 (older firmware) | — (none) | Created during setup | 192.168.8.1 |
If the router asks for a password on a unit you have used before, type the one you created at setup. There is no password recovery, so a forgotten password means a factory reset.
Change GL.iNet GL-MT300N-V2 WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory key is printed on the label for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at 192.168.8.1 with your admin password.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
GL.iNet GL-MT300N-V2 Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the Mango network, not to mobile data or a different Wi-Fi network.
- Type 192.168.8.1 exactly, with no extra letters or spaces. Try http://192.168.8.1 if the page will not load.
- Do not type admin or goodlife as the admin password. The admin password is the one you created at first setup.
- Check the Wi-Fi key on the label if you cannot join the network. The Wi-Fi key and the admin password are not the same thing.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: let it finish booting, then hold the reset button for about 10 seconds and let go.
A 3-second hold only resets the network, so use the full 10 seconds when the password is lost. After the reset, the router asks you to create a new admin password, exactly as it did when it was new. Once you are in, our port-forwarding guide shows the next setup step for gaming and cameras.
The Mango weighs 39 grams, measures 58 by 58 by 25 millimetres, and runs on 2.4GHz Wi-Fi at up to 300Mbps with OpenWrt inside. It has one WAN port, one LAN port, and a USB port for tethering a phone.










