Netduma R2 Router Login: Default Password
Netduma R2 Default Login and Password I know the feeling: the Netduma R2 is online,…
Netduma R2 Default Login and Password
I know the feeling: the Netduma R2 is online, your games run, but the DumaOS page will not accept the password you are sure is right. I have been stuck on that screen myself, and the fix is usually the wrong address, not a wrong password.
This guide gives you the correct R2 login, the two addresses owners mix up, and the steps that get you into DumaOS.
Log in to the Netduma R2 at 192.168.77.1 with the username admin and the password password. Some login databases list 192.168.88.1 instead, so try that address second if the first page does not load.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.77.1
Username: admin
Password: password
WiFi Name (SSID): NetdumaR2
Login to Admin Panel →This button opens the router login page at 192.168.77.1 directly. It works only when your device is connected to that router, by WiFi or cable.
How to Log in to the Netduma R2
I walk through this in the same order every time, because the order keeps a login from going wrong. Check the label on the bottom of your R2 before you type anything.
- Connect your computer or phone to the Netduma R2 with an Ethernet cable or over the Wi-Fi network called NetdumaR2.
- Open a browser and go to 192.168.77.1. You can also type dumaos in the address bar.
- Type admin in the username field and password in the password field.
- Click Log In. The DumaOS setup wizard opens on a first login, or the DumaOS dashboard on later logins.

Netduma R2 Default Username and Password
I have seen this catch owners out: the R2 has two addresses floating around online, and only one of them is the official one. The table below lists both, so try the official row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| Netduma R2 (official) | admin | password | 192.168.77.1 |
| Netduma R2 (database listing) | admin | password | 192.168.88.1 |
If 192.168.77.1 does not load, try 192.168.88.1 — our 192.168.88.1 guide covers that address. The Wi-Fi password printed on the label under the router is not the admin password, so do not type it here.
Change Netduma R2 WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory password is the same on every unit. Once you are logged in, the change takes about a minute.
- Log in at 192.168.77.1 with your admin password.
- Open Network Settings, then Wi-Fi.
- Type your new network name (SSID) in the network name box and save it.
- Type a new Wi-Fi password, then save the settings.
- Reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
Netduma R2 Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the R2 network, not to mobile data or a different Wi-Fi network.
- Type the address exactly: 192.168.77.1, with no extra letters or spaces. Try 192.168.88.1 only if the first address does not load.
- Type password as the admin password, not the Wi-Fi password printed on the label under the router.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the R2: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the small black Reset button on the back for about 10 seconds, then let go.
A reset erases every setting, and you will need to run the first-time setup wizard again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
The Netduma R2 is a dual-band 802.11ac gaming router running DumaOS 3, with four Gigabit LAN ports, a USB 3.0 port, and the Geo-Filter and QoS tools that set it apart from standard routers.










