Arris TG3452A Login: Default IP & Password

Arris TG3452A Default Login and Password I know the feeling: the Arris TG3452A is online,…

Arris TG3452A Default Login and Password

I know the feeling: the Arris TG3452A is online, the Wi-Fi works, but the admin page will not accept the password you are sure is right. I have been stuck on that screen myself, and the fix is usually a label password, not the generic default.

This guide gives you the correct TG3452A login, the ISP variants that trip owners up, and the steps that get you in.

Log in to the Arris TG3452A at 192.168.0.1 with the username admin and the password password. Some ISP-supplied units use the Wi-Fi password printed on the label instead, so check the sticker if password fails.

The fastest way in: tap the button below, then sign in with the details in the box.

🔐 Arris TG3452A Admin Login

IP Address: 192.168.0.1

Username: admin

Password: password

Login to Admin Panel →

This button opens our 192.168.0.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.

How to Log in to the Arris TG3452A

I walk through this in the same order every time, because the order keeps a login from going wrong. Check the label on your own gateway before you type anything.

  1. Connect your computer or phone to the Arris TG3452A with an Ethernet cable or over Wi-Fi.
  2. Open a browser and go to 192.168.0.1. Type the address into the address bar, not the search bar.
  3. Type admin in the username field and password in the password field. On Cogeco-supplied units, use the Wi-Fi password printed on the label instead.
  4. Click LOGIN. The admin panel opens, and you can change the Wi-Fi details or check connected devices.
Arris TG3452A login ethernet cables wifirouterzone.com
Connect by cable or Wi-Fi before you open the login page.

Arris TG3452A Default Username and Password

I have seen this catch owners out: the TG3452A has no single password that fits every unit, because cable providers change the defaults. The table below lists every combination I could verify, so find your unit and try its row first.

ModelUsernamePasswordLogin IP
TG3452A (most common)adminpassword192.168.0.1
TG3452 (base model)adminpassword192.168.0.1
Cogeco-supplied TG3452adminPrinted on router label192.168.0.1
ISP variantcusadminpassword192.168.0.1

If your unit is not in the table, start with admin and password. That is the combination most TG3452A gateways ship with, and the label password is the fallback to try next.

Change Arris TG3452A WiFi Password and Network Name

I change the Wi-Fi password first on every router I set up, because the factory password is the same on every unit. Once you are logged in, the change takes about a minute.

  1. Log in at 192.168.0.1 with your admin password.
  2. Open the Wi-Fi or Wireless settings in the admin panel.
  3. Type your new network name (SSID) in the network name box and save it.
  4. Set the security to WPA2, then type a new Wi-Fi password.
  5. Save the settings, then reconnect your devices with the new password.

Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.

Arris TG3452A Login Not Working?

I start with the connection itself, because that is where most login failures begin.

  • Make sure your device is connected to the TG3452A network, not to mobile data or a different Wi-Fi network.
  • Check that the coaxial cable is plugged into the cable port on the back of the gateway.
  • Try password first, then the Wi-Fi password on the gateway label. On some ISP units, cusadmin with password works instead of admin.
  • Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
  • Restart the gateway: unplug it, wait 30 seconds, and plug it back in.

If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button for about 10 to 30 seconds with a paperclip, then let go.

A reset erases every setting, and it can also remove your ISP’s settings, so you may need your provider to get back online. For the full Arris login guide, see our Arris router login page.

The Arris TG3452A is a Touchstone telephony gateway with dual-band Wi-Fi and two phone lines, supplied by cable providers such as Astound and Cogeco.

FAQs About Arris TG3452A Login

The Arris TG3452A logs in at 192.168.0.1 with the username admin and the password password. Some ISP-supplied units use the Wi-Fi password printed on the label instead.

They are the same Touchstone telephony gateway family, and both use 192.168.0.1 with admin and password. The A suffix marks a later hardware revision, not a different login.

I check the label first, because the label password is the one most owners miss. Try password, then the Wi-Fi password printed on the sticker, then cusadmin with password on some ISP units.

Log in at 192.168.0.1, open the Wi-Fi settings, type a new network name and password, and save. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.

Press and hold the recessed Reset button for about 10 to 30 seconds with a paperclip, then let go. A reset erases every setting, so you will need to set the gateway up again and may need your ISP to restore the connection.

The team behind this guide
Omar Haddad

Omar Haddad found this topic
Keyword Analyst
Focus: Search Data & Demand

Sarah Mitchell

Sarah Mitchell wrote this guide
Senior Content Writer · Published November 16, 2026
Focus: Router Login Guides

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts