GL.iNet GL-AR150 Login: Default IP & Password

I have travelled with the GL.iNet GL-AR150, and the same thing trips owners up every…

I have travelled with the GL.iNet GL-AR150, and the same thing trips owners up every time. The login page asks for a password, but the router never had one, so owners type admin and get stuck. Your travel router is online, the settings sit one login away, and the page gives no clue what it wants.

This guide gives you the GL-AR150 login, the setup steps, and the fixes that get you in.

The GL.iNet GL-AR150 has no default admin password. Log in at 192.168.8.1 and create your admin password on the first visit — the WiFi key on the label only connects you to the network.

The fastest way in: tap the button below, then sign in with the password you created at setup.

🔐 GL.iNet GL-AR150 Admin Login

IP Address: 192.168.8.1

Username: — (no username)

Password: Created during setup

WiFi Name (SSID): GL-XXXXX-xxx

Login to Admin Panel →

This button opens our 192.168.8.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.

How to Log in to the GL.iNet GL-AR150

I walk through this in the same order every time, because the order keeps a login from going wrong. First-time setup asks you to create the password, so start there if the router is new.

  1. Power the GL-AR150 from a USB port or power bank and wait for it to finish booting.
  2. Join its Wi-Fi network, called GL-XXXXX-xxx, with the key printed on the label. Older units use goodlife.
  3. Open a browser and go to 192.168.8.1. Type the address into the address bar, not the search bar.
  4. Choose your language, then create an admin password of at least 5 characters and click Apply.
  5. The admin panel opens, and you can set up the internet connection or change the Wi-Fi details.

GL.iNet’s own first-time setup video walks through the same steps. It uses a newer model as its example, but the flow is the same on the AR150.

GL.iNet GL-AR150 login laptop desk setup wifirouterzone.com
Join the router’s Wi-Fi first, then open the admin panel.

GL.iNet GL-AR150 Default Username and Password

I have seen this catch owners out: login sites list admin and admin for the AR150, and that is wrong. GL.iNet’s own docs say the first visit asks you to set a password, so use the table below and create yours.

ModelUsernamePasswordLogin IP
GL-AR150 (standard firmware)— (none)Created during setup192.168.8.1
GL-AR150 (Tor firmware)— (none)Created during setup192.168.8.1

If the router asks for a password on a unit you have used before, type the one you created at setup. There is no password recovery, so a forgotten password means a factory reset.

Change GL.iNet GL-AR150 WiFi Password and Network Name

I change the Wi-Fi password first on every router I set up, because the factory key is printed on the label for anyone to read. Once you are logged in, the change takes about a minute.

  1. Log in at 192.168.8.1 with your admin password.
  2. Open the wireless settings in the admin panel.
  3. Type your new network name (SSID) in the network name box and save it.
  4. Set the security to WPA2, then type a new Wi-Fi password.
  5. Save the settings, then reconnect your devices with the new password.

Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.

GL.iNet GL-AR150 Login Not Working?

I start with the connection itself, because that is where most login failures begin.

  • Make sure your device is connected to the GL-AR150 network, not to mobile data or a different Wi-Fi network.
  • Type 192.168.8.1 exactly, with no extra letters or spaces. Try http://192.168.8.1 if the page will not load.
  • Do not type admin as the password. The admin password is the one you created at first setup.
  • Check the Wi-Fi key on the label if you cannot join the network. The Wi-Fi key and the admin password are not the same thing.
  • Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
  • Restart the router: unplug it, wait 30 seconds, and plug it back in.

If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: let it finish booting, then hold the reset button for about 10 seconds and let go.

A 3-second hold only resets the network, so use the full 10 seconds when the password is lost. After the reset, the router asks you to create a new admin password, exactly as it did when it was new. Once you are in, our port-forwarding guide shows the next setup step for gaming and cameras.

The GL-AR150 is a pocket-size mini travel router with 150Mbps Wi-Fi, two Ethernet ports, and OpenWrt inside. It runs on USB power, so I carry it with a power bank when I travel.

FAQs About GL.iNet GL-AR150 Login

There is no default admin password. The first time you open 192.168.8.1, the router asks you to create one, and that is the password you use from then on. I never type admin as the password, because it will not work.

The default IP is 192.168.8.1. Type http://192.168.8.1 in the browser address bar while connected to the router, by Wi-Fi or cable.

The Wi-Fi network is called GL-XXXXX-xxx, and the key is printed on the label on the bottom of the router. Older GL.iNet documentation lists goodlife as the default key, so I try the label first and goodlife second.

Log in at 192.168.8.1, open the wireless settings, type a new network name and password, and save. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.

Let the router finish booting, then hold the reset button for about 10 seconds and let go. A 3-second hold only resets the network, so I always use the full 10 seconds when I have lost the admin password.

The team behind this guide
Omar Haddad

Omar Haddad found this topic
Keyword Analyst
Focus: Search Data & Demand

Lucas Meyer

Lucas Meyer wrote this guide
Content Writer · Published November 18, 2026
Focus: Router Security

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts