Netcomm Router Login: Default IP & Password
I have set up NetComm routers for Australian homes, and the same thing trips owners…
I have set up NetComm routers for Australian homes, and the same thing trips owners up every time. The brand changed its default address over the years, so half the guides online send you to the wrong one. Your gateway is online, the settings sit one login away, and the page gives no clue what it wants.
This guide gives you the NetComm login, the model table, and the steps that get you in.
Most NetComm routers log in at 192.168.20.1 with the username admin and the password admin. Older NF and NB models use 192.168.1.1 instead, so check the model table below for your unit.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.20.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.20.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. If your model is an older NB unit, use 192.168.1.1 instead.
How to Log in to a NetComm Router
I walk through this in the same order every time, because the order keeps a login from going wrong. Check the model on the label of your own router before you type anything.
- Connect your computer or phone to the NetComm router with an Ethernet cable or over Wi-Fi.
- Open a browser and go to 192.168.20.1. On an older NF or NB model, go to 192.168.1.1 instead.
- Type admin in the username field and admin in the password field, then click OK or Log In.
- On a newer NF20 or NF18MESH, type the unique password printed on the label instead of admin.
- The admin panel opens, and you can change the Wi-Fi details or check connected devices.

NetComm Default Username and Password
I have seen this catch owners out: NetComm is an Australian maker of DSL and fibre gateways, now part of Casa Systems, and its address changed with the model year. The table below lists every model I could verify, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| NF18ACV | admin | admin | 192.168.20.1 |
| NF2 | admin | admin | 192.168.20.1 |
| NF18MESH | admin | (printed on the label) | 192.168.20.1 |
| NF20 | admin | (printed on the label) | 192.168.20.1 |
| NB604N / NB6Plus4W | admin | admin | 192.168.1.1 |
| 3G21WB (Telstra) | admin | admin | 10.0.0.138 |
| NTC-140 | admin | admin | 192.168.1.1 |
If your model is not in the table, start with admin and admin at 192.168.20.1, then try 192.168.1.1. Newer models have their password on the label, so read it before you guess.
Change NetComm WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory password is the same on every unit. Once you are logged in, the change takes about a minute.
- Log in at your NetComm router’s address with your admin password.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
NetComm Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the NetComm network, not to mobile data or a different Wi-Fi network.
- Check that the WAN cable is plugged into the port labelled WAN, and that you are on a LAN port or the NetComm Wi-Fi.
- Try 192.168.20.1 first, then 192.168.1.1. The address is the part most owners get wrong on this brand.
- On an NF20 or NF18MESH, use the password on the label. The admin password and the Wi-Fi password are not the same thing.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button on the rear panel for 10 seconds, until the power light starts to blink, then let go.
A reset erases every setting, and you will need your ISP’s details to set the router up again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
The NF18ACV is a VDSL2 and ADSL2+ dual-band AC1600 gateway with VoIP, and it is the NetComm model most Australian homes have. It answers at 192.168.20.1 with admin and admin.










