Belkin F9K1108 Login: Router Admin Setup Guide
The first time I set up an F9K1108, I stared at the login page waiting…
The first time I set up an F9K1108, I stared at the login page waiting for a password prompt that never came. I have since learned the Belkin asks for no username and no password at all: you just click Submit.
This guide gives you the correct defaults for the F9K1108 and the four steps that will get you into the admin panel.
Log in at 192.168.2.1 — there is no username or password; just click Submit on the login page.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.2.1
Username: (none)
Password: None — just click Submit
Login to Admin Panel →This button opens your router’s own login page. It works only when your device is connected to this router, by WiFi or cable.
Belkin F9K1108 Default Login Details
I checked these defaults against the F9K1108 setup flow before I wrote them down, so the table below matches the router you have in front of you.
These are the factory defaults for the F9K1108: there is no username and no password — the router ships with no password, so you just click Submit to log in — and the login IP address is 192.168.2.1.
| Detail | Value |
|---|---|
| Login IP | 192.168.2.1 |
| Username | (none) |
| Password | None — just click Submit |
How to Log In to the Belkin F9K1108
I walk through this in the same order every time, because the order is what keeps a login from going wrong. If your router asks you to create a password instead, the Belkin login guide covers that first-setup flow too.
- Connect your computer or phone to the F9K1108 with an Ethernet cable or over Wi-Fi.
- Open a browser and go to 192.168.2.1. You can also open http://router, which takes you to the same login page.
- Leave the username and password fields blank — the router ships with no password.
- Click Submit. The admin panel opens, and you can change the Wi-Fi name and password, update the firmware, or change the router settings.
Default Username and Password — All Variants
I have seen this catch owners out: some Belkin models ask for nothing at all on the login page while others ask for a password, so check which case matches your router.
The F9K1108 ships with no password at all. Some third-party sites list admin/admin, but that is disputed filler from modem.tools only — do not rely on it. If a password was set after setup, only that password works.
| Version | Username | Password |
|---|---|---|
| Factory default | (none) | None — the router ships with no password; just click Submit |
| Some third-party listings | admin | admin — listed by modem.tools only; disputed filler, not the factory default |
| After a password change | (none) | The password you set is the only one that works — or reset the router to restore the factory state. |
Change WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because every device in the house connects with it.
Once you are logged in to the F9K1108 admin panel, changing the Wi-Fi details takes about a minute.
- Log in at 192.168.2.1 — no password is needed, just click Submit.
- Open the Wireless settings section of the admin panel.
- Change the network name (SSID) for the 2.4 GHz and 5 GHz bands, or leave it as it is.
- Type a new Wi-Fi password, then save the settings.
- Reconnect your devices with the new password.
Use a password of at least 12 characters with a mix of letters and numbers, and avoid reusing a password you use somewhere else.
Login Not Working?
I start with the connection itself, because that is where most login failures begin, and I work through the list in the order it is written.
If the login page will not open or the password is rejected, work through these fixes:
- Make sure your device is connected to the F9K1108 network, not to mobile data or a different Wi-Fi network.
- Type the address exactly: http://192.168.2.1, with no extra letters or spaces. Try http://router if the IP address does not open.
- Try a different browser, or clear the browser cache and try again.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the Reset button for about 10 seconds, then wait for the router to restart.
The username and password return to the factory defaults — there is no password — so you can log in and set a new password.
Key specs: The Belkin F9K1108 is a WiFi 4 (802.11n) dual-band router.
