Wavlink WL-WN527A2 Login: Default Password

Log in to the Wavlink WL-WN527A2 at 192.168.10.1 with admin and admin, watch for its password-only login variant, and fix the faults that keep owners out.

I have logged in to plenty of Wavlink routers, and the WL-WN527A2 has one quirk that wastes owners time. The box prints wifi.wavlink.com as the login address, but Wavlink now says that address no longer works, so owners land on a dead page. Your AC1200 router is online, the settings sit one login away, and the old address points nowhere.

This guide gives you the WL-WN527A2 login, the setup steps, and the fixes that get you in.

Log in to the Wavlink WL-WN527A2 at 192.168.10.1 with admin as the username and admin as the password. Use the IP address, not wifi.wavlink.com, which Wavlink says no longer works.

The fastest way in: tap the button below, then sign in with admin and admin.

🔐 Wavlink WL-WN527A2 Admin Login

IP Address: 192.168.10.1

Username: admin

Password: admin

WiFi Name (SSID): WAVLINK-N / WAVLINK-AC

Login to Admin Panel →

This button opens our 192.168.10.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.

How to Log in to the Wavlink WL-WN527A2

Start with the IP address, since the printed web address is the part that fails most often.

  1. Power the WL-WN527A2 and wait for it to finish booting, then connect your computer by cable or join its Wi-Fi network.
  2. Open a browser and go to 192.168.10.1. Type the address into the address bar, not the search bar.
  3. Type admin in the username box and admin in the password box. Some Wavlink pages ask for the password only, so type admin there.
  4. Click Login. The admin panel opens on the setup screen.
  5. If this is the first setup, follow the on-screen wizard to set your internet connection and Wi-Fi details.
Wavlink WL-WN527A2 login laptop home office wifirouterzone.com
Join the router’s Wi-Fi first, then open the admin panel.

Wavlink WL-WN527A2 Default Username and Password

I check the label before I trust any login list, because Wavlink models share most of their defaults. The WL-WN527A2 follows the brand standard, and the router databases agree with the Wavlink manual on every field.

ModelUsernamePasswordLogin IP
WL-WN527A2adminadmin192.168.10.1
WL-WN527A2 (password-only login)— (blank)admin192.168.10.1

The label on the bottom of the router prints the default IP as 192.168.10.1, and the Wavlink user guide lists the same address with admin as the login password.

Older boxes also print wifi.wavlink.com, but Wavlink support says to use the IP address instead. If the login page asks for a username, it is also admin.

Change Wavlink WL-WN527A2 WiFi Password and Network Name

I change the Wi-Fi password first on every router I set up, because admin is printed in every manual and anyone on the network can try it. Once you are logged in, the change takes about a minute.

  1. Log in at 192.168.10.1 with admin and admin.
  2. Open the wireless settings in the admin panel.
  3. Type your new network name (SSID) in the network name box and save it.
  4. Set the security to WPA2, then type a new Wi-Fi password.
  5. Save the settings, then reconnect your devices with the new password.

Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else.

Wavlink WL-WN527A2 Login Not Working?

  • Make sure your device is connected to the WL-WN527A2 network, not to mobile data or a different Wi-Fi network.
  • Type 192.168.10.1 exactly, with no extra letters or spaces. Do not use wifi.wavlink.com, since Wavlink says that address no longer works.
  • Type admin in lowercase for both boxes. The login is case-sensitive, and Admin with a capital A will fail.
  • Check that Caps Lock is off, and type the password exactly as it is.
  • Restart the router: unplug it, wait 30 seconds, and plug it back in.

If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: let it finish booting, then hold the reset button for about 10 seconds and let go. After the reset, the password is admin again.

Once you are in, our port-forwarding guide shows the next setup step for gaming and cameras.

The WL-WN527A2 is an AC1200 dual-band Wi-Fi router, with a 2.4 GHz network called WAVLINK-N and a 5 GHz network called WAVLINK-AC. It also works as an access point and a repeater, and it uses the same 192.168.10.1 admin address as most Wavlink routers.

Wavlink WL-WN527A2 problems users report, and what fixed them

Repeater will not connect even right next to the router

Wavlink says the main cause is a wrong host WiFi password. Run the wizard again and enter the router’s password exactly. See Wavlink: repeater cannot connect.

Not sure if setup worked

After repeater setup succeeds, Wavlink notes the network name changes from WAVLINK-N or WAVLINK-AC to your router name with _ext2.4G or _ext5G added.

Connection drops between extender and router

Wavlink suggests setting up next to the router, then moving it to where the signal is weak but still steady, and rebooting the extender.

FAQs About Wavlink WL-WN527A2 Login

The default password is admin, and the default username is also admin. Type both in lowercase at 192.168.10.1. I change this password right after the first login, because it is printed in every manual.

The default IP is 192.168.10.1. Type http://192.168.10.1 in the browser address bar while connected to the router, by Wi-Fi or cable.

Wavlink says the wifi.wavlink.com login is no longer applicable and tells owners to type the device IP address instead. Use 192.168.10.1, which is also printed on the label on the router.

Log in at 192.168.10.1, open the wireless settings, type a new network name and password, and save.

Let the router finish booting, then hold the reset button for about 10 seconds and let go. After the reset, log in at 192.168.10.1 with admin and admin.

The team behind this guide
Kevin Doyle

Kevin Doyle found this topic
SEO Research Lead
Focus: Topic & Keyword Research

Oliver Bennett

Oliver Bennett wrote this guide
Content Writer · Published November 19, 2026
Focus: Mesh WiFi & Smart Home

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts