Adtran 1004W Login: Default IP & Password

Find the default Adtran 1004W router IP address, admin username and password, open the login page, and fix the sign-in problems owners hit most often.

Adtran 1004W Default Login and Password

I know the feeling: the Adtran 1004W is online, the fibre light is steady, but the admin page will not accept the password you are sure is right. I have been stuck on that screen myself, and the fix is usually the login, not the connection. This router has one factory login, and it is the same on every unit.

This guide gives you the 1004W login, the ISP password note, and the reset that works.

Log in to the Adtran 1004W at 192.168.1.1 with the username admin and the password admin. ISP-supplied units may use a password set at installation instead.

The fastest way in: tap the button below, then sign in with the details in the box.

🔐 Adtran 1004W Admin Login

IP Address: 192.168.1.1

Username: admin

Password: admin

Login to Admin Panel →

This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.

How to Log in to the Adtran 1004W

Connect to the router first, then open the login page.

  1. Connect your computer or phone to the Adtran 1004W with an Ethernet cable or over its Wi-Fi network.
  2. Open a browser and go to 192.168.1.1. Type the address into the address bar, not the search bar.
  3. Type admin in the username field and admin in the password field.
  4. Click Log In or OK. The admin panel opens, and you can change the Wi-Fi details or check connected devices.
  5. If the page asks for a password you did not set, check the install sheet from your provider before you try anything else.
Adtran 1004W login RJ45 ethernet connector wifirouterzone.com
Connect by cable or Wi-Fi before you open the login page.

Adtran 1004W Default Username and Password

I have seen this catch owners out: Adtran business gear uses different logins, so owners copy the wrong one. The 1004W is a residential unit, and the table below lists the combination I could verify.

ModelUsernamePasswordLogin IP
1004W (residential)adminadmin192.168.1.1
1004W (ISP-supplied)adminSet at installation192.168.1.1

If admin and admin fail on a provider-supplied unit, the password was set when the router was installed. Your provider’s support team can give it to you, or reset the unit and set a new one.

Change Adtran 1004W WiFi Password and Network Name

Once you are logged in, the change takes about a minute.

  1. Log in at 192.168.1.1 with your admin password.
  2. Open the wireless settings in the admin panel.
  3. Type your new network name (SSID) in the network name box and save it.
  4. Set the security to WPA2, then type a new Wi-Fi password.
  5. Save the settings, then reconnect your devices with the new password.

Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else.

Adtran 1004W Login Not Working?

  • Make sure your device is connected to the 1004W network, not to mobile data or a different Wi-Fi network.
  • Check that the fibre or DSL cable is plugged in and the connection light is steady, not blinking.
  • Try admin as both the username and the password. The Wi-Fi password and the admin password are not the same thing.
  • If your unit came from your provider, try the password on your install sheet. Adtran business logins do not work on this model.
  • Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
  • Restart the router: unplug it, wait 30 seconds, and plug it back in.

If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button on the back for about 10 seconds with a paperclip, then let go.

A reset erases every setting, and you will need your provider’s details to set the router up again. If the login page will not open at all, check that you are using the right gateway address first.

Adtran 1004W vs Other Adtran Routers

The 1004W is a residential gateway from fibre providers such as Zzoomm, and it logs in at 192.168.1.1. Adtran business routers such as the NetVanta range use different addresses and logins, so do not use those guides for this model. I check the model first on Adtran gear, because the residential and business logins are easy to mix up.

The brand-wide Adtran default for business gear is a different username and password at 192.168.190.1. Our Adtran router login guide covers the whole brand, model by model.

Adtran router problems users report, and what fixed them

None of the usual IPs open the login page

An Adtran 834-5 owner tried router.local, 192.168.1.1 and several others with no luck. On Northwestel, the router is managed through the ISP’s control panel with your account email, so ask the ISP for access.

Where the admin password is

TekSavvy’s Adtran guides say the username is admin and the password is unique, printed on the label under the router. See TekSavvy: Adtran 834-v6.

Extender stopped working after the ISP swapped routers

A Netgear EX8000 owner kept the same WiFi name and password on a new Adtran 834-5, but devices could not join the extender’s 2.4GHz network. Re-run the extender setup against the new router.

FAQs About Adtran 1004W Login

The Adtran 1004W logs in at 192.168.1.1 with the username admin and the password admin. That is the factory default for this residential model.

The default IP is 192.168.1.1. Type 192.168.1.1 in the browser address bar while connected to the router, not in the search bar.

Because the password was set at installation by your provider. ISP-supplied 1004W units often ship with an install-set password, so check your install sheet or call your provider’s support team.

Log in at 192.168.1.1, open the wireless settings, type a new network name and password, and save.

Press and hold the recessed Reset button on the back for about 10 seconds with a paperclip, then let go. A reset erases every setting, so you will need your provider’s details to set the router up again.

The team behind this guide
Omar Haddad

Omar Haddad found this topic
Keyword Analyst
Focus: Search Data & Demand

Megan Taylor

Megan Taylor wrote this guide
Content Writer · Published November 19, 2026
Focus: Buying Guides

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts