Adtran Router Login: Default IP & Password
Log in to an Adtran router at 192.168.1.1 with admin and admin; NetVanta and Bluesocket models differ. WiFi changes, reset and fixes inside.
I have helped with Adtran logins for years, and the same thing trips people up every time. Adtran makes more than one kind of box, and each line answers at a different address with a different password. Your connection is online, the settings sit one login away, and the page gives no clue which combination your unit wants.
This guide gives you the most common Adtran login, every line I could verify, and the steps that get you in.
Most Adtran routers log in at 192.168.1.1 with the username admin and the password admin. NetVanta business units use 10.10.10.1 instead, and Bluesocket access points use 192.168.190.1 with adm1n and blue1socket.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.
How to Log in to a Adtran Router
I walk through this in the same order every time, because the order keeps a login from going wrong. Check the label on your own unit before you type anything.
- Connect your computer or phone to the Adtran router with an Ethernet cable or over Wi-Fi.
- Open a browser and go to 192.168.1.1. Type the address into the address bar, not the search bar.
- Type admin in the username field and admin in the password field, then click OK or Log In.
- The admin panel opens, and you can change the Wi-Fi details or check connected devices. If nothing loads, try 10.10.10.1 or 192.168.0.1 next.

Adtran Default Username and Password
I have seen this catch owners out: Adtran has no single login that fits every unit. The table below lists every combination I could verify, so find your model and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| SR360N (super user) | admin | admin | 192.168.1.1 |
| SR360N (common user) | user | user | 192.168.1.1 |
| 1004W | admin | admin | 192.168.1.1 |
| 854v4 | admin | password | 192.168.1.1 |
| NetVanta 2100 | admin | admin | 10.10.10.1 |
| NetVanta 3120 | admin | password | 10.10.10.1 |
| Total Access 324RG | admin | admin | 10.10.10.1 |
| Bluesocket APs | adm1n | blue1socket | 192.168.190.1 |
If your model is not in the table, start with admin and admin at 192.168.1.1. That is the combination most Adtran residential units ship with, and some also accept admin with a blank password.
Change Adtran WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory password is the same on every unit. Once you are logged in, the change takes about a minute.
- Log in at 192.168.1.1 with your admin password.
- Open the Wireless settings section of the admin panel.
- Type a new network name (SSID) if you want one, or leave it as it is.
- Type a new Wi-Fi password, then save the settings.
- Reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
Adtran Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the Adtran network, not to mobile data or a different Wi-Fi network.
- Wait at least 30 seconds for the login page to load. Adtran pages open more slowly than most routers.
- If the browser warns about the certificate, carry on. Adtran routers use self-signed certificates, and the connection is safe on your home network.
- Try admin and password, then admin and admin, then admin with a blank password. ISP-customized units often use one of the first two.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- If the browser jumps to 192.168.0.254 after you connect, do not worry. Some Adtran models redirect to that address on their own.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button for about 10 to 30 seconds with a paperclip, then let go.
A reset erases every setting, and it can also remove your ISP’s settings, so you may need your provider to get back online.. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
<









