Hathway Router Login: Default IP & Password
I have helped with Hathway logins for years, and the same thing trips people up…
I have helped with Hathway logins for years, and the same thing trips people up every time. Hathway ships more than one router, and each one answers at a different address. Your broadband is online, the settings sit one login away, and the page gives no clue which of the three addresses your box uses.
This guide gives you the most common Hathway login, all three addresses, and the steps that get you in.
Most Hathway routers log in at 192.168.100.1 with the username admin and the password admin. Older and newer models also answer at 192.168.1.1 and 192.168.0.1, so try each address in turn if the first one does not load.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.100.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.100.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable.
How to Log in to a Hathway Router
I walk through this in the same order every time, because the order keeps a login from going wrong. Use an Ethernet cable if you can, because some Hathway routers block the admin page over Wi-Fi.
- Connect your computer to the Hathway router with an Ethernet cable, or over Wi-Fi if you have no cable.
- Open a browser and go to 192.168.100.1. Type the address into the address bar, not the search bar.
- Type admin in the username field and admin in the password field. If a captcha appears, type the code shown and click Login.
- Click Log In. The admin panel opens, and you can change the Wi-Fi details or check connected devices.
Hathway Default Username and Password
I have seen this catch owners out: Hathway has no single address that fits every router. The table below lists every combination I could verify, so find your model and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| HW-300 series | admin | admin | 192.168.100.1 |
| HW-600 series | admin | admin | 192.168.1.1 |
| Older Hathway routers | admin | admin | 192.168.0.1 |
| Some installed units | admin | MAC address on label | 192.168.100.1 |
If your model is not in the table, start with admin and admin at 192.168.100.1. That is the combination most Hathway routers ship with, and the password returns to admin and admin after a factory reset.
Change Hathway WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory password is the same on every unit. Once you are logged in, the change takes about a minute.
- Log in at 192.168.100.1 with admin and admin.
- Open the Wireless or WiFi settings section of the admin panel.
- Type a new network name (SSID) if you want one, or leave it as it is.
- Type a new Wi-Fi password, then save the settings.
- Reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
Hathway Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the Hathway network, not to mobile data or a different Wi-Fi network.
- Try all three addresses in turn: 192.168.100.1, then 192.168.1.1, then 192.168.0.1.
- If the page will not open over Wi-Fi, plug in an Ethernet cable. Some Hathway routers block admin access from wireless connections.
- Try the MAC address printed on the back of the router as the password. Some technicians set that as the password during installation.
- Try admin as the username with no password, or leave both fields empty. Some Hathway units ship with a blank password.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button for about 10 to 30 seconds with a paperclip, then let go.
A reset erases every setting and brings the login back to admin and admin, so you may need your installation details to get back online.. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Most routers log in at 192.168.100.1, and the HW-600 series uses 192.168.1.1. If neither loads, 192.168.0.1 is the third address worth trying.
