Calix GigaHub 814G-1 Login: IP & Password

Find the default Calix GigaHub 814G-1 IP address, admin username and password, open the login page, and fix the sign-in problems owners hit most often.

Calix GigaHub 814G-1 Default Login and Password

I know the feeling: the Calix GigaHub 814G-1 is online, the fibre light is steady, but the admin page will not accept the password you are sure is right. I have been stuck on that screen myself, and the fix is not a different password. This gateway has no shared default password at all — the one that works is printed on its own label.

This guide gives you the GigaHub login and the label to check.

Log in to the Calix GigaHub 814G-1 at 192.168.1.1 with the username admin and the password printed on the label shipped inside the box. There is no shared default password for this model.

The fastest way in: tap the button below, then sign in with the details in the box.

🔐 Calix GigaHub 814G-1 Admin Login

IP Address: 192.168.1.1

Username: admin

Password: Printed on the label

Login to Admin Panel →

This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. The password is unique to your unit — find it on the label.

How to Log in to the Calix GigaHub 814G-1

Find the label first, then open the login page.

  1. Connect your computer to the GigaHub with an Ethernet cable or over its Wi-Fi network.
  2. Find the inventory label shipped inside the GigaHub box, or the product label on the device. Read the login password from it.
  3. Open a browser and go to 192.168.1.1. Type the address into the address bar, not the search bar.
  4. Type admin in the username field and the password from the label in the password field.
  5. Click Log In. The Embedded Web Interface opens, and you can change the Wi-Fi details or check connected devices.
Calix GigaHub 814G-1 login network cables server rack wifirouterzone.com
Find the label password before you open the login page.

Calix GigaHub 814G-1 Default Username and Password

I have seen this catch owners out: login sites list admin and admin for Calix, and that is wrong for the GigaHub. The official Quick Start Guide says the credentials come from the label, so use the table below.

ModelUsernamePasswordLogin IP
GigaHub 814G-1adminPrinted on the label192.168.1.1

The label also lists the default Wi-Fi security key and the default IP address of the gateway. If the label is missing, your provider can give you the credentials, because they are unique to your unit.

Change Calix GigaHub 814G-1 WiFi Password and Network Name

Once you are logged in, the change takes about a minute.

  1. Log in at 192.168.1.1 with your admin password.
  2. Open the wireless settings in the admin panel.
  3. Type your new network name (SSID) in the network name box and save it.
  4. Set the security to WPA2, then type a new Wi-Fi password.
  5. Save the settings, then reconnect your devices with the new password.

Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else.

Calix GigaHub 814G-1 Login Not Working?

  • Make sure your device is connected to the GigaHub network, not to mobile data or a different Wi-Fi network.
  • Do not type admin as the password. The password is the string on the label shipped inside the box, and it is different on every unit.
  • Check that the fibre cable is seated and the status light is steady. A GigaHub with no fibre signal may not serve the login page.
  • If your provider manages the unit remotely, the local login may be locked. Ask your provider before you reset anything.
  • Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
  • Restart the GigaHub: unplug it, wait 30 seconds, and plug it back in.

If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button with a paperclip until the lights change, then let go.

A reset erases every setting, and you will need your provider’s details to set the gateway up again. If the login page will not open at all, check that you are using the right gateway address first.

Calix GigaHub 814G-1 Key Specs

Fibre providers supply the GigaHub 814G-1 as a fibre home gateway with built-in Wi-Fi. The label on the unit lists its serial number, ONU MAC address, Wi-Fi security key, default IP address, and login credentials. I check the label first on a GigaHub, because every password on it is unique to the unit.

Wireless  security runs on WPA2 by default, with the key on the label. Our Calix router login guide covers the rest of the Calix range.

Calix GigaHub 814G problems users report, and what fixed them

Cannot set custom ports

An owner of the related GigaHub 813G complained there was no option to define a custom service with your own ports. Ask your ISP to set it, or put your own router behind it.

Your own router behind it gives double NAT

A Calix 844E user ran his Nighthawk behind the ISP router and lost features. Ask the ISP to set bridge mode, since some ISPs push the router back to normal mode remotely.

ISP tech suggests chaining routers

A Netgear forum user’s ISP told him to connect ONT, then Calix router, then his own router. That works but creates double NAT, so use AP mode on your router to avoid it.

FAQs About Calix GigaHub 814G-1 Login

The GigaHub 814G-1 logs in at 192.168.1.1 with the username admin and the password printed on the label shipped inside the box. There is no shared default password for this model.

There is none. Each GigaHub ships with its own password on the inventory label inside the box and on the product label. Login guides that list admin and admin for this model are wrong.

The default IP is 192.168.1.1, which opens the Embedded Web Interface. The same address is printed on the inventory label inside the box.

Log in at 192.168.1.1, open the wireless settings, type a new network name and password, and save.

Press and hold the recessed Reset button with a paperclip until the lights change, then let go. A reset erases every setting, so you will need your provider’s details to set the gateway up again.

The team behind this guide
Grace Muller

Grace Muller found this topic
Content Strategist
Focus: Topic Planning & Coverage

Priya Sharma

Priya Sharma wrote this guide
Content Writer · Published November 19, 2026
Focus: Broadband & ISP Guides

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts