Zyxel Keenetic 4G Login: Default Password
The Zyxel Keenetic 4G opens at 192.168.1.1 with admin and 1234 on older firmware. This guide covers the login, the first-setup password, and the fixes.
I have set up Zyxel Keenetic routers for years, and the 4G model trips owners up in one specific way. The login is admin and 1234 on the older firmware, but newer firmware asks you to create a password at first setup instead. Your router is online, and the label and the firmware version tell you which login to use.
This guide gives you the Keenetic 4G login, the model table, and the steps that get you in.
The Zyxel Keenetic 4G (KN-1210) logs in at 192.168.1.1 with the username admin and the password 1234. You can also open my.keenetic.net in your browser while you are on the Keenetic network.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: admin
Password: 1234
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. If your 4G runs the newer firmware, the page asks you to create a password instead of accepting 1234.
How to Log in to the Zyxel Keenetic 4G
Check the model on the label of your own router before you type anything.
- Connect your computer to the Keenetic 4G with an Ethernet cable or over its Wi-Fi network.
- Open a browser and go to 192.168.1.1, or type my.keenetic.net into the address bar instead.
- Type admin in the username field and 1234 in the password field, then click Login.
- If the first-setup page opens instead, create your own admin password and save it before you go further.
- The admin panel opens, and you can change the Wi-Fi details or plug in a 3G/4G USB modem.

Zyxel Keenetic 4G Default Username and Password
I have seen this catch owners out: the Keenetic 4G family has several versions, and the login changes with the firmware. The table below lists every version I could verify from the setup guides, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| Keenetic 4G (KN-1210) | admin | 1234 | 192.168.1.1 |
| Keenetic 4G II | admin | 1234 | 192.168.1.1 |
| Keenetic 4G III | admin | 1234 | 192.168.1.1 |
| Keenetic 4G (newer firmware) | admin | set at first setup | 192.168.1.1 |
If 1234 fails and the page asks you to create a password, your 4G runs the newer firmware. Create a strong password and save it — there is no factory password to fall back on.
The admin/admin pair shows up on some lists for Keenetic, but the setup guides for the 4G, 4G II and 4G III all print 1234. I try 1234 first and treat admin/admin as a guess.
Change Zyxel Keenetic 4G WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory password is printed in the setup guides for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at 192.168.1.1 with admin and 1234, or with the password you created at first setup.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
The admin password and the Wi-Fi password are separate on the Keenetic 4G, so changing one does not change the other.
If the quick setup wizard opens on your first login, finish it before you change the Wi-Fi settings. The wizard sets the internet connection first, and the wireless menu only works properly after that.
Zyxel Keenetic 4G Login Not Working?
- Make sure your device is connected to the Keenetic network, not to mobile data or a different Wi-Fi network.
- Check that the WAN cable is plugged into the port labelled WAN, and that you are on a LAN port or the Keenetic Wi-Fi.
- Try admin and 1234 first. If the page asks you to create a password instead, your 4G runs the newer firmware — create one and save it.
- Try my.keenetic.net if 192.168.1.1 fails. The name opens the same admin page while you are on the Keenetic network.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press the reset button on the back of the router and hold it for about 10 seconds, then let go.
A reset erases every setting, and the router will ask you to set it up again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Zyxel Keenetic 4G Key Specs
The Keenetic 4G (KN-1210) is a single-band N300 router: 300 Mbps Wi-Fi on 2.4 GHz, one 100 Mbps WAN port and three 100 Mbps LAN ports, a 575 MHz processor, 64 MB of RAM and 16 MB of flash. It runs the NDMS operating system, and the web interface opens at 192.168.1.1 or my.keenetic.net.
The 4G in the name points at mobile internet. Plug a supported 3G/4G USB modem into the router and it shares the mobile connection over Wi-Fi, which is how this model serves homes without a fixed line. Keenetic lists more than 150 supported USB modems, so I check the list before I buy one.
It is an older model, so I treat any 4G still in service as a legacy device and plan its replacement rather than relying on it for new security work.
The 4G is the router where the firmware matters most. Try admin and 1234 first, and if the page asks you to create a password, that is the newer firmware doing its job. The admin page opens at 192.168.1.1 either way.
Keenetic 4G problems users report, and what fixed them
USB modem is not detected
Keenetic asks owners of unlisted modems to send the model, revision, operator and region to support. A Keenetic 4G owner fixed an unrecognized Huawei stick by installing every USB modem component in the web interface.
Modem shows “Not ready” after an update
After KeeneticOS 3.7, some ZTE modems stayed in “Not ready”. Keenetic’s fix is to set an admin password on the modem’s own page, or set it on the router with CLI commands on 3.8 and later.
4G keeps disconnecting
Keenetic recommends turning off Ping Check and moving the modem toward a window on a shielded USB cable. See Keenetic: LTE connection diagnostics.










