CradlePoint IBR600E Login: IP & Password

Open the CradlePoint IBR600E admin panel for your Verizon setup, find the right login details for your model, and fix the faults that keep owners out.

I have spent enough time staring at a router login page that would not open to know how annoying this one feels. You type the address, the page spins, and nothing happens. I wrote this guide so you can log in to your CradlePoint IBR600E Verizon router in a few minutes, with the right address and the password that is printed on your own unit.

This guide covers the CradlePoint IBR600E Verizon router only: its login address, its unique default password, how to log in, how to change the Wi-Fi name and password, and how to reset it.

Open http://192.168.0.1 (or cp/) in your browser and enter the 8-character default password printed on the label on the bottom of your router. That password is also the last eight characters of your router’s MAC address, and it is different on every unit.

The fastest way in: connect to the router by Wi-Fi or cable, open 192.168.0.1, and type the 8-character password from the label on the bottom of your unit.

🔐 CradlePoint IBR600E Verizon Router Admin Login

IP Address: 192.168.0.1

Username: — (password only, no username)

Password: 8-character password on the bottom label

Login to Admin Panel →

This button opens our 192.168.0.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by Wi-Fi or cable. There is no shared factory password for this model — never use admin/admin or ‘password’.

How to Log in to the CradlePoint IBR600E Verizon

Read the password off the label on the bottom of your own unit before you type anything.

  1. Connect your phone or computer to the IBR600E by Wi-Fi (network name IBR600-xxx) or with an Ethernet cable.
  2. Open a browser and type http://192.168.0.1 in the address bar, then press Enter. You can also type cp/ instead.
  3. When the password prompt appears, type the 8-character default password from the label on the bottom of your router.
  4. If this is your first login, the First Time Setup Wizard opens. Follow it to set your own admin password, Wi-Fi name, and security mode.
  5. If you changed the password before and forgot it, reset the router (see the reset section below) and log in again with the label password.
Ethernet cables connected to router ports with green lights wifirouterzone.com
Connect by cable or Wi-Fi before you open the login page.

CradlePoint IBR600E Verizon Default Username and Password

I have seen this catch owners out: login sites list admin and admin for this router, but the Cradlepoint manual says something else entirely. There is no shared factory password for the IBR600E. Each unit has its own 8-character password, printed on the label on the bottom, and it is also the last eight characters of the unit’s MAC address.

UsernamePasswordStatus
— (no username field)8-character default password on the bottom labelVerified — Cradlepoint Quick Start Guide and IBR600 manuals
admin8-character default password on the bottom labelNot verified for this model — third-party guides only

The Cradlepoint manual shows a password-only login screen, with no username field. Some third-party guides list admin as the username, but that is not verified in the manufacturer manual for this model, so try the label password first.

Do not use admin and admin. It is a common guess from aggregator sites, and it is not the IBR600E default. The password is case-sensitive, and the example password shown in the manual belongs to one sample unit only — never type it in as your password.

Change CradlePoint IBR600E Verizon WiFi Password and Network Name

Once you are logged in, the change takes a few minutes.

  1. Log in at http://192.168.0.1 with the password from the bottom label.
  2. If it is your first login, use the First Time Setup Wizard: it lets you set the Wi-Fi network name, security mode, and password in one pass.
  3. If you have logged in before, open Getting Started, then First Time Setup — or go to Networking, then Wi-Fi / Local Networks — and edit your network name and password there.
  4. Save your changes. The router may restart its Wi-Fi.
  5. Reconnect every device with the new Wi-Fi name and password. Your old devices will drop off until you do this.

The default Wi-Fi name is IBR600-xxx, using the last three characters of the MAC address, and the Wi-Fi password out of the box is the same unique default password. The power light shows amber until you change the default admin and Wi-Fi passwords, which is the router’s way of telling you the job is not done yet.

CradlePoint IBR600E Verizon Key Specs

I have used small business routers like this one, and the IBR600E is built for places that cannot afford to drop offline. It carries its own Verizon LTE modem, so it can run on mobile data alone or take over when a wired line fails.

FieldValue
ModelCradlePoint COR IBR600E (Verizon variant: COR IBR600LPE-VZ)
TypeIntegrated Broadband Router — compact, rugged, built for business and M2M use
Cellular (Verizon)4G LTE / HSPA+ / EVDO — LTE 50 Mbps down/up, HSPA+ 21.1 down / 5.76 up, EVDO 3.1 down / 1.8 up (theoretical); LTE bands 2, 4, 5, 13, 17; one 2FF SIM slot
Wi-Fi2×2 MIMO 802.11 b/g/n, 2.4 GHz, up to 64 Wi-Fi connections
EthernetTwo 10/100 ports (WAN or LAN)
PortsPower, 2x Ethernet, 2x cellular SMA antenna, 2x Wi-Fi reverse SMA antenna, micro USB
Default IP192.168.0.1 (or hostname cp/)
Default SSIDIBR600-xxx (last 3 characters of the MAC address)
VPN / networkIPsec VPN up to 5 concurrent sessions, GRE, VLAN 802.1Q, IPv6, failover/failback
Size / power3.3 x 4.0 x 0.9 in (85 x 102 x 22 mm); 12V / 1.5A; operating -20C to 60C

Its Wi-Fi is 802.11n on 2.4 GHz, and it has two Ethernet ports that can work as WAN or LAN. It is a small metal box, about the size of my palm, and it is made to run day and night in kiosks, vehicles, and small sites.

CradlePoint IBR600E Verizon Login Not Working?

  • Make sure your device is connected to the IBR600E by Wi-Fi or cable. A device on mobile data or another network cannot reach 192.168.0.1.
  • Type 192.168.0.1 exactly — not 192.168.1.1 and not 192.168.0.1 with a typo. The hostname cp/ works as an alternative.
  • Read the label on the bottom of the router again. The password is case-sensitive and is the last eight characters of the MAC address.
  • If the page asks for a password you never set, the First Time Setup Wizard may have set one already. Try the password you chose, or reset the router.
  • No internet after login: the Verizon modem needs an active data plan and, on some units, activation. Check the modem status under Internet, then Connection Manager.
  • If the login page will not open at all, check that you are using the right gateway address with our router IP finder.

If you forgot the password you set, reset the router to factory defaults. With the power on, press the small recessed reset button with a paper clip and hold it for 10 seconds, until the lights flash (about 10 to 15 seconds).

The router restarts, and the admin password goes back to the default password printed on the bottom label. A reset erases every setting you changed, including your Wi-Fi name and password, so you will need to set them up again.

I keep coming back to one point with this router: the password is on the label, and it is different on every unit. Once you log in with it, change the admin password and the Wi-Fi password to ones only you know, and write them down somewhere safe. That one step keeps your IBR600E yours.

Cradlepoint IBR600 (Verizon) problems users report, and what fixed them

Connected but no internet

The IBR600 manual says to confirm an active data plan and activate the modem from the admin pages, using the ESN on the label when adding a line.

Slow speeds and high ping

A Verizon customer with an IBR-600B had working but slow internet and failing speed tests. Verizon support asked for location and history to check the tower, so test the SIM in another spot first.

SIM connects elsewhere but not here

Peplink forum staff note “Obtaining IP Address” is nearly always a wrong APN or an unauthorized plan. For Verizon, set the APN to VZWINTERNET instead of auto. See Cradlepoint: modem connectivity checklist.

FAQs About CradlePoint IBR600E Verizon Login

192.168.0.1. Type http://192.168.0.1 in your browser, or type cp/ instead. Your device must be connected to the router by Wi-Fi or cable for the page to load.

There is no shared default password. Your password is the unique 8-character code printed on the label on the bottom of your router. It is also the last eight characters of the router’s MAC address, which is printed on the same label.

The Cradlepoint manual shows a password-only login screen, with no username field. Some third-party guides list admin as the username, but that is not verified in the manufacturer manual for this model, so try the label password first.

With the power on, press the small recessed reset button with a paper clip and hold it for 10 seconds, until the lights flash. The router restarts with factory settings, and the password goes back to the 8-character default on the bottom label.

First, check your device is connected to the IBR600E network and not to mobile data or another router. Then type the address exactly, or try cp/. If the page still will not load, restart the router and try again from a different browser.

The team behind this guide
Rachel Kim

Rachel Kim found this topic
Topic Researcher
Focus: Reader Questions & Trends

Marcus Lee

Marcus Lee wrote this guide
Content Writer · Published November 21, 2026
Focus: ISP & Modem Routers

Nina Petrova

Nina Petrova designed the visuals
Graphic Designer
Focus: Brand & Illustrations

Awais

Awais verified the facts
Founder & Editor-in-Chief · Last verified: November 2026
Focus: Final fact-check & publishing

Similar Posts