Sercomm Router Login: Default IP & Password
Sercomm builds ISP gateways like the Vodafone Station and Speedport Plus. This guide gives you the login for each model, the setup steps, and the fixes.
You picked up a Sercomm gateway from your internet provider, and the login page asks for a password you were never given. I have set these ISP routers up before, and the password is almost never admin: it is printed on the label on the router itself. This guide gives you the login for each Sercomm model, and the steps that get you in.
This guide gives you the Sercomm router login, the model table, and the steps that get you in.
Most Sercomm ISP gateways log in at 192.168.1.1 with the username admin and the password printed on the router label. Some models use 192.168.0.1, 192.168.1.254, or 192.168.2.1 instead, and Vodafone models use vodafone as the username. Check the model table below for yours.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: admin
Password: printed on the label
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the gateway itself. It works only when your device is connected to that gateway, by WiFi or cable. Sercomm gateways are ISP-branded, so the password on your label is the one that works. The table below lists the models.
How to Log in to a Sercomm Router
Check the model on the label of your own gateway before you type anything.
- Connect your computer to the Sercomm gateway with an Ethernet cable or over its Wi-Fi network.
- Open a browser and go to 192.168.1.1. If that address does not load, try the address in your model’s row of the table below.
- Type admin in the username field, unless your model uses vodafone or a blank username.
- Type the password printed on the label on the bottom or back of the gateway, then click Login.
- The admin panel opens, and you can change the Wi-Fi details or check connected devices.

Sercomm Default Username and Password
Sercomm is a Taiwanese maker of ISP gateways, so there is no single Sercomm login: Vodafone, Telekom, Movistar, and Orange each brand the same hardware their own way. I built this table from the PortForward and SetupRouter hardware databases, because no Sercomm consumer manual states one default. Find your model and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| AG Combo VD625 | Administrator | admin | 192.168.1.1 |
| H300s | admin | printed on router | 192.168.2.1 |
| NB6V-FXC-r0 | admin | WPA key printed on router | 192.168.1.1 |
| NB6VAC-FXC-r0 / -r1 | admin | printed on router | 192.168.1.1 |
| RHG3006 (Vodafone Station) | vodafone | printed on router | 192.168.1.1 |
| RV6699 (Movistar) | admin | blank or printed on router | 192.168.0.1 / 192.168.1.254 |
| SER805 | (none — leave blank) | created during initial setup | 192.168.2.1 |
| SHG3000 (Vodafone Station) | admin or vodafone | printed on router | 192.168.1.1 |
| Speedport Plus / Plus 2 (Telekom) | admin | printed on router | 192.168.1.1 |
| WD300 (reported) | admin | admin | 192.168.1.1 |
If your model is not in the table, start with admin and the password on the label at 192.168.1.1. That is the pattern most Sercomm ISP gateways follow, and the label on the bottom of the gateway is the final word if the pair fails.
The admin and admin pair shows up on many password lists for Sercomm, and I have seen it work only on the AG Combo VD625 and the WD300. Sercomm prints a unique password on the label of most of its ISP gateways, so I use the label password first and treat admin and admin as a commonly repeated mistake.
Change Sercomm WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory password is printed on the label for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at your model’s address with the username and label password from the table above.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
On the Speedport Plus and the Vodafone Station the admin password and the Wi-Fi password are separate, so changing one does not change the other.
Our WiFi settings guide covers the same steps in detail.
Sercomm Login Not Working?
- Make sure your device is connected to the Sercomm network, not to mobile data or a different Wi-Fi network.
- Check that the WAN cable is plugged into the port labelled WAN, and that you are on a LAN port or the gateway Wi-Fi.
- Try the password on the label first. Admin does not work on most Sercomm ISP gateways, even though many lists print it.
- Try the other address for your model. Most Sercomm gateways use 192.168.1.1, but the RV6699 also answers at 192.168.1.254, and the H300s and SER805 answer at 192.168.2.1.
- Check that Caps Lock is off, and type the password exactly as it is. Passwords are case-sensitive.
- Restart the gateway: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press the reset button on the back of the gateway with a paper clip and hold it until the lights change, then let go.
Sercomm is the brand where the label matters most. Read the model, read the password off the label, and the admin page opens at 192.168.1.1. Admin was never the answer here. Check the table if your model is new, and the login takes seconds.
Sercomm problems users report, and what fixed them
The label password does not work on my Three hub
Owners of the Sercomm LTE2122GR on Three UK reported the label login failing on a new hub. Community members suggested a pinhole reset so the label details apply again; one user found the hub itself was faulty.
Which login does a Sercomm box use
Sercomm builds routers for ISPs (SFR, Three and others). Some SFR models use admin with the WPA key from the label as the password, so read the label before trying generic logins.
Typed it right and it still fails
Verizon forum helpers point out that label passwords are case-sensitive, and O and 0 or 1 and I are easy to mix up.










