4G LTE CPE Router Login: Default IP & Password
I have set up more 4G LTE CPE routers than I can count, and the…
I have set up more 4G LTE CPE routers than I can count, and the same thing trips owners up every time. There is no single brand behind the name, so there is no single login page that fits every box. Your router has its own address, and the login stays shut until you use the right one.
This guide gives you the most common 4G LTE CPE login, the model address table, and the steps that get you in.
Most 4G LTE CPE routers log in at 192.168.1.1 with the username admin and the password admin. The address varies by model, so check the label on your device first — the table below lists the common ones.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. If your CPE uses a different address, use the one on its label instead.
How to Log in to a 4G LTE CPE Router
I walk through this in the same order every time, because the order keeps a login from going wrong. Check the label on your own CPE unit before you type anything.
- Connect your computer or phone to the 4G LTE CPE router with an Ethernet cable or over its Wi-Fi network.
- Find the login address on the label on the bottom or back of the unit. Most models use 192.168.1.1.
- Open a browser and go to that address. Type it into the address bar, not the search bar.
- Type admin in the username field and admin in the password field, then click Log In or OK.
- The admin panel opens, and you can change the Wi-Fi details or check the SIM and signal status.

4G LTE CPE Default Username and Password
I have seen this catch owners out: 4G LTE CPE is a product type, not a brand, so the login address changes from one model to the next. The username and password are almost always admin and admin, but the address is the part you must get right.
| Model | Username | Password | Login IP |
|---|---|---|---|
| DBIT 4G BOX (CLM920) | admin | admin | 192.168.1.1 |
| CPE106-E | admin | admin | 192.168.0.1 |
| KuWFi CPE1202S | admin | admin | 192.168.2.1 |
| VONJUN LC117 / OPTFOCUS SRI304 | admin | admin | 192.168.100.1 |
| KuWFi CPF906 | admin | admin | 192.168.199.1 |
| D-Link R102FG | (password only) | admin | 192.168.169.1 |
| KuWFi Outdoor CPE | admin | admin | 172.16.0.1 |
If your model is not in the table, start with admin and admin at the address on its label. That is the combination most CPE routers ship with, and the label address is the one that works for your exact unit.
Change 4G LTE CPE WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because the factory key is printed on the label for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at your CPE router’s address with your admin password.
- Open Wi-Fi, WLAN, or Wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
Use a password of at least 12 characters with letters and numbers, and do not reuse a password from anywhere else. I write the new password down before I save it, so I am not locked out of my own Wi-Fi.
4G LTE CPE Login Not Working?
I start with the connection itself, because that is where most login failures begin.
- Make sure your device is connected to the CPE router, not to mobile data or a different Wi-Fi network.
- Check that the SIM card is seated properly and the signal light is on. No signal means no admin page on some CPE units.
- Try the address on the label exactly. 192.168.1.1 is the most common, but your model may use 192.168.100.1 or another address from the table.
- Try admin as both the username and the password. The Wi-Fi password and the admin password are not the same thing.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the CPE router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press and hold the recessed Reset button for about 5 to 10 seconds with a paperclip, then let go.
A reset erases every setting, including the SIM PIN and APN, so you may need your mobile provider’s details to get back online. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Most CPE routers answer at 192.168.1.1 with admin and admin. When the address is wrong, the label on the bottom of the unit has the one that works.










