Planet Router Login: Default IP & Password
PLANET routers answer at 192.168.1.1 with admin and admin. Find your model in the table below, log in, and fix the common login problems fast.
I have set up PLANET routers for small offices, and the same thing trips owners up every time. The login lists disagree about the address, and one popular list sends WDRT-750AC owners to the wrong page entirely. Your router is online, and the right login is printed in PLANET’s own manuals.
This guide gives you the PLANET router login, the model table, and the steps that get you in.
PLANET routers log in at 192.168.1.1 with the username admin and the password admin. That pair comes from PLANET’s own manuals for the WDRT-730, the WDRT-750AC, and the ICG-2510W-LTE gateway.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. If your model is the WDRT-750AC, try its row in the table below first.
How to Log in to a PLANET Router
Check the model on the label of your own router before you type anything.
- Connect your computer to the PLANET router with an Ethernet cable or over its Wi-Fi network.
- Open a browser and type 192.168.1.1 into the address bar, not the search bar.
- Type admin in the username field and admin in the password field, then click Login.
- On the first login the page may ask you to change the password. Pick a new one and save it before you go further.
- The admin panel opens, and you can change the Wi-Fi details or check connected devices.

PLANET Default Username and Password
I have seen this catch owners out: PLANET makes routers, access points, and industrial gateways, and the lists mix them up. The table below lists every model I could verify from PLANET’s own manuals and the hardware lists, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| WDRT-730 | admin | admin | 192.168.1.1 |
| WDRT-750AC | admin | admin | 192.168.1.1 |
| ICG-2510W-LTE | admin | admin | 192.168.1.1 |
| WNRT-617 v1 | admin | admin | 192.168.1.1 |
| WNRT-617 v2 | admin | admin | 192.168.1.1 |
| WAP-4000 | admin | admin | 192.168.1.1 |
| VC-230N | admin | admin | 192.168.1.1 |
If your model is not in the table, start with admin and admin at 192.168.1.1. That is the pair PLANET prints in its own manuals, and it is the pair most PLANET routers ship with. The label on the bottom of the router is the final word if the pair fails.
One hardware list gives 192.168.100.1 for the WDRT-750AC, but the WDRT-750AC manual itself prints 192.168.1.1. I try 192.168.1.1 first and keep 192.168.100.1 as the fallback, not the default.
Change PLANET WiFi Password and Network Name
I change the Wi-Fi password first on every router I set up, because PLANET ships some models with no wireless encryption at all. Once you are logged in, the change takes about a minute.
- Log in at 192.168.1.1 with admin and admin.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
The WDRT-750AC ships with the open names WDRT-750AC_2.4G and WDRT-750AC_5G and no encryption, and the WDRT-730 ships with default_2.4G and default_5G, also open. I set WPA2 on both bands the same day I install the router, because an open network is an open door.
If your PLANET router came from an ISP with the settings locked, the wireless menu may hide some options. That is common on ISP-supplied routers, and the fix is a call to the ISP, not a reset. Our WiFi settings guide covers the same steps in detail.
PLANET Login Not Working?
- Make sure your device is connected to the PLANET network, not to mobile data or a different Wi-Fi network.
- Check that the WAN cable is plugged into the port labelled WAN, and that you are on a LAN port or the PLANET Wi-Fi.
- Try admin and admin first. Admin and password does not work on PLANET routers, even though some lists print it.
- Try the other address for your model. Most PLANET routers use 192.168.1.1, but the WDRT-750AC is also listed at 192.168.100.1.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press the reset button on the back of the router with a paper clip and hold it until the lights change, then let go.
A reset erases every setting, and the router will ask you to set it up again. If the login page will not open at all, check that you are using the right gateway address with our Router IP Finder tool.
PLANET is the brand where the manual matters most. Type admin and admin at 192.168.1.1, and the admin page opens on almost every model. Check the label if your unit is new, and the login takes seconds.
PLANET problems users report, and what fixed them
admin and admin do not work on my VoIP gateway
PLANET VIP-480FD gateways use admin with password 123, not admin. See PLANET: VIP-480FD default password.
Which address does PLANET use
Many PLANET routers, such as the VRT-420N, open at 192.168.0.1, while some older ADSL models use 192.168.1.1 or 192.168.1.254. Check the manual for your model.
I only have guest access
Some PLANET gateways have a separate guest account with limited menus. Log out and sign in with the admin account to change settings.










