Digi Router Login: Default IP & Password
Log in to a Digi TransPort router at 192.168.1.1 with admin and the password on the device label, and fix the login faults owners hit most often.
I have worked on Digi TransPort routers in offices and remote sites, and the login trips owners up more than any other brand. The password changed with the firmware, so the combination that worked on an old unit fails on a new one. Your gateway is online, and the right login depends on the label and the firmware.
This guide gives you the Digi login for each product line, the model table, and the steps that get you in.
Current Digi TransPort routers log in at 192.168.1.1 with the username admin and the unique password printed on the device label. Older firmware used username and password instead, and Digi Connect devices use root and dbps.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: admin
Password: password printed on the label
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. Read the password off the label on the bottom of your Digi unit before you start.
How to Log in to a Digi Router
Check the label on the bottom of your own unit before you type anything.
- Connect your computer to the Digi router with an Ethernet cable, on the LAN 0 port.
- Open a browser and go to 192.168.1.1. That is the default address for the LAN 0 port.
- Type admin in the username field on a current TransPort unit, and the unique password from the device label.
- On older firmware, type username in the username field and password in the password field instead.
- The admin panel opens, and you can change the settings or check the cellular signal and connected devices.

Digi Default Username and Password
I have seen this catch owners out: Digi changed its defaults with firmware 8.0.0.3, so one login does not fit every box. The table below lists every product line I could verify from Digi’s own documents, so find yours and try its row first.
| Model / Line | Username | Password | Login IP |
|---|---|---|---|
| TransPort WR21 / WR31 / WR44 (firmware 8.0.0.3+) | admin | unique password on the label | 192.168.1.1 |
| TransPort WR21 / WR31 / WR44 (older firmware) | username | password | 192.168.1.1 |
| TransPort, no label password (firmware 8.0.0.3+) | admin | default | 192.168.1.1 |
| Connect WAN / ConnectPort | root | dbps | 192.168.1.1 |
| ConnectPort X2 | root | dbps | 192.168.1.1 |
If your TransPort was made before firmware 8.0.0.3 and never upgraded, username and password is the pair to try. If it was made with 8.0.0.3 or later, the label password is the only one that works after a factory reset, and I always read it off the label first.
The label is the whole story on a current TransPort. It carries the model, the serial number, and the unique password, and Digi’s own documents say that password returns after a factory reset. I photograph the label before I touch anything, because the text is small and it rubs off with age.
Change Digi WiFi Password and Network Name
Most Digi TransPort routers are wired and cellular gateways with no Wi-Fi radio at all, so there is often no Wi-Fi password to change. I check the model first, because the steps below only apply to Digi units that ship with Wi-Fi.
- Log in at 192.168.1.1 with your admin password.
- Open Configuration, then Network, then Wi-Fi in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password.
- Save the settings, then reconnect your devices with the new password.
On a TransPort with no Wi-Fi module, the wireless menu simply is not there, and that is normal. I never invent a Wi-Fi password for a unit that has no radio, and I change the admin password first instead, so the label password is not the only thing guarding the gateway.
If your unit has no wireless menu, do not go looking for a hidden Wi-Fi password — there is not one. The security job on a TransPort is the admin password and the cellular APN, and both sit on the first screens of the panel.
Digi Login Not Working?
- Make sure your computer is on the Digi LAN 0 port, not on a different network or mobile data.
- Check that the WAN or cellular antenna is connected, and that you are on a LAN port.
- Try the right pair for your firmware. Old units use username and password; new units use admin and the label password.
- If the label has no password and the firmware is 8.0.0.3 or later, try admin and default.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the router: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press the reset or erase button on the unit and hold it until the lights change, then let the router restart. A factory reset brings back the label password on current firmware.
A reset erases every setting, including the cellular APN, so you will need to set the router up again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Digi is the brand where the label matters most. Read the password off the bottom of the unit, match it to your firmware, and the login page opens first time. Keep the label readable and the password safe, and the login never becomes a puzzle.
Digi problems users report, and what fixed them
Which login does my Digi router use
Digi supplies ZTE, Huawei, TP-Link and other boxes. A Digi Spain customer on the bandaancha forum logged in to a ZTE H3600P at 192.168.1.1 with admin and admin, then set a new password. Check your label first.
admin and admin do not work on my TP-Link from Digi
ISP-customized TP-Link routers often have a different admin password. TP-Link explains how to find it in TP-Link: log in to an ISP modem router.
I only see basic settings
Some Digi routers give the user account limited menus. For bridge mode or port changes, contact Digi support.










