SmartRG Router Login: Default IP & Password
Log in to your SmartRG gateway at 192.168.1.1 with admin and admin, find the right address for your model, and fix the login faults owners hit most often.
I have set up SmartRG gateways for DSL and fibre customers, and the same thing trips owners up every time. The login page looks plain, the ISP branding hides the settings, and one wrong password locks you out of your own gateway. Your connection is live, and the admin panel sits one login away.
This guide gives you the SmartRG login, the model table, and the steps that get you in.
Most SmartRG routers log in at 192.168.1.1 with the username admin and the password admin. The SR515AC is the exception: it uses 192.168.42.1 with admin and the Wi-Fi key printed on the label, so check your model in the table below.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.1.1
Username: admin
Password: admin
Login to Admin Panel →This button opens our 192.168.1.1 login guide, which takes you to the router itself. It works only when your device is connected to that router, by WiFi or cable. If your model is an SR515AC, use 192.168.42.1 instead.
How to Log in to a SmartRG Router
Check the model on the label of your own gateway before you type anything.
- Connect your computer to the SmartRG gateway with an Ethernet cable or over its Wi-Fi network.
- Open a browser and go to 192.168.1.1. On an SR515AC, go to 192.168.42.1 instead, or add /admin to the address.
- Click Manage Gateway (Advanced) if that link appears on the first screen.
- Type admin in the username field and admin in the password field, then click Log In.
- The admin panel opens, and you can change the Wi-Fi details or check connected devices.

SmartRG Default Username and Password
I have seen this catch owners out: SmartRG sells through ISPs, so one login does not fit every box. The table below lists every model I could verify from the manuals and ISP setup guides, so find yours and try its row first.
| Model | Username | Password | Login IP |
|---|---|---|---|
| SR505N / SR505n | admin | admin | 192.168.1.1 |
| SR500N / SR350N | admin | admin | 192.168.1.1 |
| SR515AC (Sonic) | admin | Wi-Fi key on the label | 192.168.42.1 |
| SR516ac | admin | admin or Wi-Fi key on the label | 192.168.1.1 |
| SR400ac | (blank) | admin | 192.168.1.1 |
| SR506n | admin | admin | 192.168.1.1 |
If your model is not in the table, start with admin and admin at 192.168.1.1. That is the combination the SR505N ships with, and it is the gateway most SmartRG owners have at home. Some ISPs change the password to your DSL password, so try that next if admin fails.
The label on the bottom of the gateway is the fastest way to tell which model you own. It lists the model name, the default Wi-Fi name, and the Wi-Fi key — and on the SR515AC that key is also the admin password. I photograph the label before I start, because ISPs sometimes cover it with their own sticker.
Change SmartRG WiFi Password and Network Name
I change the Wi-Fi password first on every gateway I set up, because the factory key is printed in the manual for anyone to read. Once you are logged in, the change takes about a minute.
- Log in at your SmartRG gateway’s address with your admin password.
- Open Management, then Access Controls, then Passwords if you want to change the admin password first.
- Open the wireless settings in the admin panel.
- Type your new network name (SSID) in the network name box and save it.
- Set the security to WPA2, then type a new Wi-Fi password, save, and reconnect your devices.
On the SR515AC the admin password is the same as the Wi-Fi key on the label until you change it, so changing the Wi-Fi password also changes how you log in. I write the new password down before I save it, so I am not locked out of my own gateway.
If your ISP locked the wireless settings, the admin panel may hide the Wi-Fi menu entirely. That is common on ISP-supplied gateways, and the fix is a call to the ISP, not a reset — a reset keeps the lock and only wipes your own settings.
SmartRG Login Not Working?
- Make sure your device is connected to the SmartRG network, not to mobile data or a different Wi-Fi network.
- Check that the WAN cable is plugged into the port labelled WAN, and that you are on a LAN port or the SmartRG Wi-Fi.
- Try the right address for your model. The SR505N uses 192.168.1.1, but the SR515AC uses 192.168.42.1.
- Try admin and admin first, then your DSL password if your ISP set one up.
- Check that Caps Lock is off, and type the password exactly as it is — passwords are case-sensitive.
- Restart the gateway: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the router to factory settings: press the reset button on the rear panel with a paper clip and hold it for about 10 seconds, then let go.
A reset erases every setting, and the gateway will ask you to set it up again. If the login page will not open at all, check that you are using the right gateway address with our router IP finder.
Most SmartRG gateways answer at 192.168.1.1 with admin and admin. The SR515AC is the one model that breaks the pattern, and its label holds the password you need. Write the label password down once you find it, and the next login takes seconds.
SmartRG problems users report, and what fixed them
admin and admin do not work
TekSavvy lists a second default on its SmartRG SR400ac: admin with the last 4 characters of the MAC plus the last 4 of the serial number, in capitals. See TekSavvy: SmartRG SR400ac.
The page opens but advanced menus are missing
SmartRG SR505N and SR515AC routers split the interface: 192.168.1.1/user for basic settings and 192.168.1.1/admin for advanced ones. TekSavvy notes Apple users may need to type /admin directly.
My SR808AC rejects the admin login
The SR808AC cable modem opens at 192.168.0.1 and uses the unique password printed under the modem, per TekSavvy.










