Hitron CGNV2 Login: Default IP & Password
Hitron CGNV2 Default Login and Password I know the scene: the Hitron CGNV2 is online,…
Hitron CGNV2 Default Login and Password
I know the scene: the Hitron CGNV2 is online, the Wi-Fi works, but the admin page will not accept the password you typed. I have been stuck on that screen myself, and the fix is usually the username, not the password. The CGNV2 is a cable gateway, so its login lives at 192.168.0.1, and this guide gives you the correct defaults, the login steps, and the reset fix that works when nothing else does.
Log in to the Hitron CGNV2 at 192.168.0.1 with the username cusadmin and the password password. On Rogers units, the password may be the Wi-Fi password printed on the label instead.
The fastest way in: tap the button below, then sign in with the details in the box.
IP Address: 192.168.0.1
Username: cusadmin
Password: password
SSID: HITRON-XXXX
Login to Admin Panel →This button opens our 192.168.0.1 guide, which takes you on to the router login page. It works only when your device is connected to this gateway, by WiFi or cable.
Hitron CGNV2 Default Login Details
I checked these defaults against the CGNV2 user’s guide, Rogers support pages, and Hitron setup guides before I wrote them down, so the table below matches the gateway you have in front of you.
The CGNV2 is an ISP-supplied cable gateway, so it answers at 192.168.0.1 on most builds. Keep the defaults somewhere safe once you have logged in, and change the admin password to something only you know.
| Detail | Value |
|---|---|
| Login IP | 192.168.0.1 |
| Username | cusadmin |
| Password | password |
| SSID | HITRON-XXXX (on the label) |
How to Log In to the Hitron CGNV2
I walk through this in the same order every time, because the order is what keeps a login from going wrong. If your gateway came from Rogers or Shaw, the Hitron login guide covers the ISP versions and the label-password case too.
- Connect your computer or phone to the CGNV2 with an Ethernet cable or over Wi-Fi. I use a cable for the first login, because a weak Wi-Fi signal can cut the page off halfway.
- Open a browser and go to 192.168.0.1. If that address does not open the login page, your gateway may answer at 10.0.0.1 instead.
- Type cusadmin in the username field and password in the password field. On Rogers units, type the easy connect Wi-Fi password from the white sticker if password is rejected.
- Click Log In. The admin page opens, and you can change the Wi-Fi name and password, check connected devices, or look at the gateway status.

Default Username and Password — All Variants
I have seen this catch owners out: the same model can ask for a different password on another build, so check which case matches your gateway.
The CGNV2 most often uses cusadmin with password as the password. Try the label case below before you reset anything:
| Version | Username | Password |
|---|---|---|
| Most common | cusadmin | password |
| Rogers / ISP units | cusadmin | Printed on router label |
If neither works, check the white sticker on the top or side of the gateway. The label is the most reliable source, since providers sometimes set unique credentials.
Change WiFi Password and Network Name
I change the Wi-Fi password first on every gateway I set up, because the factory password is the same on every unit that leaves the shop.
Once you are logged in to the CGNV2 admin page, changing the Wi-Fi details takes about a minute:
- Log in at 192.168.0.1 with the cusadmin password.
- Open the Wireless settings section of the admin page.
- Pick the 2.4 GHz network, then change the network name (SSID).
- Type a new Wi-Fi password in the Pre-shared Key field, then save the settings.
- Reconnect your devices with the new password.
Use a password of at least 12 characters with a mix of letters and numbers, and avoid reusing a password you use anywhere else.
Login Not Working?
I start with the connection itself, because that is where most login failures begin, and I work through the list in the order it is written.
If the login page will not open or the password is rejected, work through these fixes:
- Make sure your device is connected to the CGNV2 network, not to mobile data or a different Wi-Fi network.
- Type the address exactly: 192.168.0.1, with no extra letters or spaces. Some Hitron units answer at 10.0.0.1 instead.
- Remember the username is cusadmin, not admin. That one difference is the most common reason the login fails.
- Check the label again: on Rogers units the password may be the easy connect Wi-Fi password, not the word password.
- Restart the gateway: unplug it, wait 30 seconds, and plug it back in.
If you still cannot log in because the password was changed and forgotten, reset the gateway to factory settings: press and hold the small Reset button on the back for about 10 seconds until the LEDs blink. After the reset, log in again with the factory defaults above, and set up the gateway from scratch.
Bridge mode is also in the admin page if you want the gateway to work as a modem only. I leave it off unless a second router needs to handle the Wi-Fi.
Key specs: The Hitron CGNV2 is a DOCSIS 3.0 cable gateway with 802.11n Wi-Fi, four Gigabit Ethernet ports, and telephone ports for voice service.










